Forum Replies Created
-
AuthorPosts
-
1 de September de 2026 at 02:29 in reply to: Does the Jetterix feel different from a classic hose nozzle? #8990
Tommy Burrel
MemberThe whole “feels way stronger” thing gets thrown around a lot, but I wouldn’t count on it being a night and day difference. I had one for a while and honestly, the trigger and grip annoyed me enough that I stopped reaching for it. It does focus the water, sure, but if your house has average pressure, you’re still just pushing the same amount of water through a tinier hole. It’s not magic.
I found it awkward for anything that wasn’t flat ground. Holding it at an angle for a car or trying to get under stuff just felt clumsy. My old nozzle is easier to handle for that. The Jetterix is fine for a specific job, but it’s not some huge upgrade in power that changes everything. I wouldn’t toss your current setup yet.
31 de August de 2026 at 16:02 in reply to: Does the ChirpyCharm need direct sunlight for the solar panel? #8927Tommy Burrel
MemberThe solar panel on this thing is more of a helper than a full power source. If your yard is genuinely shaded for most of the day, you’re going to be plugging it in more often than you’d like. I’ve seen people assume these things just run forever on a bit of ambient light, but that’s not how it plays out in practice.
Mine is in a spot that gets a small window of direct sun in the late afternoon, and the battery drains noticeably by the end of the week. It’s not dead, but it’s low enough that I’m keeping the USB cable handy. I wouldn’t call it a dealbreaker, but I also wouldn’t buy it expecting to never touch the charger again. If you’re not willing to deal with that routine, you’re probably better off looking at a model with a bigger battery or a separate panel you can mount somewhere sunnier.
30 de August de 2026 at 16:16 in reply to: AiraBreeze water level window, is it supposed to fog up? #8769Tommy Burrel
MemberFoggy window sounds like a minor issue compared to how much of a pain these things are to keep clean anyway. Mine does it too and I stopped caring after the first week. If you can still read the line, it’s working fine.
29 de August de 2026 at 17:43 in reply to: Does Repellio work behind furniture or do I need to move things around? #8627Tommy Burrel
MemberSolid objects will cut down on the range, no way around that. I had mine tucked behind an armchair for a while and saw no change, but once I moved it closer to the baseboard I noticed activity drop off within a few days. You don’t have to rearrange the whole room, just find a spot that isn’t fully boxed in.
29 de August de 2026 at 15:48 in reply to: Earscribe in loud places, does the noise reduction help? #8613Tommy Burrel
MemberI’ll say this: mine handled a noisy train station way better than I expected. The noise reduction isn’t magic, but it did cut enough of the rumble and crowd noise that the app actually caught what I was saying. I wouldn’t rely on it in a screaming crowd, but a busy cafe should be fine.
28 de August de 2026 at 13:06 in reply to: Does the Glokore Therapy Mask work if you only use it once or twice a week? #8440Tommy Burrel
MemberThree times a week is just what the manual says, but these things are cumulative. If you only manage twice, you’ll still get something out of it, it’s just going to take longer to show. I wouldn’t buy it expecting quick results on a lazy schedule though. If you’re already doubting you’ll use it, that’s probably your answer.
Tommy Burrel
MemberMine’s actually been fine so far. Still getting through a good number of sessions before I have to plug it in, and I’ve had it since spring. Maybe I just got lucky with the unit, but I haven’t noticed any big drop-off yet.
Tommy Burrel
MemberEven after a week mine still lags enough that I wouldn’t call it live.
25 de August de 2026 at 16:29 in reply to: Does the ResQVac really clear the airway in one pull? #8069Tommy Burrel
MemberOne pull clears it? That depends on what’s stuck and where. No device is a guarantee. The three-step thing is just how you use it, not a promise that it always works first try.
25 de August de 2026 at 12:14 in reply to: Does the Vanotium really stay odor-free after garlic or fish? #8043Tommy Burrel
MemberI had the same doubt early on, but after a few months the only thing I really notice is that if I leave it sitting with food juice on it, that smell hangs around until I actually wash it. Not so much the board itself, more the dried residue. Soap and water fixes it. Never had the board itself absorb anything.
25 de August de 2026 at 11:59 in reply to: Heater Pro X vs. my old plug-in radiator, any real difference? #8041Tommy Burrel
MemberI swapped my oil radiator out for a ceramic plug-in unit about two years ago and the difference is pretty stark. The radiator would heat the whole room over an hour or so, but it took forever. I’d have to turn it on way before I actually wanted to sit in that room. The ceramic one is basically the opposite. You feel it right away, but it’s only really warm if you’re sitting within a few feet of it.
The thing that got me was the noise. My old radiator was dead silent. Just the occasional tick now and then. This thing has a fan running constantly and it’s not loud, but it’s there. When I’m trying to read or watch something in a quiet room, I notice it way more than I thought I would. That’s the detail nobody mentions in the ads. They all say quiet operation, but quiet means something different when you’re used to a radiator that makes zero sound at all.
Another thing is the room temp after you turn it off. With the radiator, the room stayed warm for a while because the oil held the heat. The ceramic one cools off almost immediately once you shut it off. So if you’re thinking about moving it around the house and turning it on just when you need it, that works, but you have to be okay with the heat just vanishing when you’re done. Not a dealbreaker, just something to know before you spend the money.
24 de August de 2026 at 04:02 in reply to: Does the Hewelth ReliefChain stay put or slide around when you move? #7892Tommy Burrel
MemberMine does the same thing, but I noticed it depends on how I sit. If I’m slouched into the couch, it shifts every time. When I sit up straight with my back against the cushion, it stays put a lot better. Something about the angle of my shoulders changes when I lean forward, and the straps just don’t have enough grip to hold it.
The material doesn’t help either. It’s smooth enough that it wants to slide on fabric and skin alike. I tried wearing it over a thicker sweatshirt and that helped a bit, but then I couldn’t feel the heat as well.
Honestly, I think it’s just a design limitation. It’s not going to be rock solid no matter what you do. As long as it doesn’t fall off completely, I just reposition it when I get back to sitting still.
Tommy Burrel
MemberStrong mode is for spot treatment, not a daily routine. I keep it for the rough patches that normal mode won’t touch, then switch right back. If you’re hitting your whole mouth with it every day, you’re asking for trouble. Your gums will let you know when you’ve overdone it.
Tommy Burrel
MemberI wouldn’t want to wrestle with that thing on a ladder, but not because of the weight. It’s the hose. Once you get up there the hose is pulling in some direction and you’re fighting that while trying to keep the nozzle aimed at the siding. One hand for the Jetterix, one for the ladder, and the hose is doing whatever it wants. That’s a no from me.
I did the whole two-story thing last year with a regular nozzle and it was annoying enough. The Jetterix is fine when you’ve got solid footing, but the second story is just not where I’d use it. I’d rather do the bottom half from the ground and figure out something else for the top. Maybe one of those extension wands or just a different nozzle.
I’m not saying it’s impossible, but you’d have to be a lot more comfortable on a ladder than I am.
11 de August de 2026 at 17:46 in reply to: Does the Hewelth UVClean need to be charged before first use? #6974Tommy Burrel
MemberMine had enough juice to run one cycle right away, so no waiting here.
28 de July de 2026 at 09:03 in reply to: Does the Qinux HydroXeltor work with low water pressure? #5971Tommy Burrel
MemberIt works fine with lower pressure. I’ve got a pretty weak outdoor spigot and it still handles basic cleaning without issues. No need to overthink it.
22 de July de 2026 at 11:49 in reply to: Coolizi Coolzy for a bedroom that gets afternoon sun? #5700Tommy Burrel
MemberMine handles the heat fine. The remote is handy but the sleep timer is what I actually use.
21 de July de 2026 at 16:21 in reply to: Coolizi Coolzy remote range any good or is it just me? #5654Tommy Burrel
MemberIt works fine from across my living room so I don’t think range is actually a real issue. Probably just people putting the unit behind something that blocks the signal.
15 de July de 2026 at 12:22 in reply to: JetClean battery life on patios — does it last long enough? #5242Tommy Burrel
MemberDepends how long you’re out there. I wouldn’t count on it lasting all day.
13 de July de 2026 at 09:10 in reply to: AerioQ wall mount — does it cool well enough for a small bedroom? #5099Tommy Burrel
MemberI’d be more concerned about how well the room holds its temperature than the unit itself. If your insulation is mediocre, no wall mount is going to do much.
9 de July de 2026 at 22:38 in reply to: Does the Glacier Breeze actually need the ice chamber to work well? #4892Tommy Burrel
MemberSkip the ice. I use it with just water and it’s fine for my desk. The ice thing is just extra fuss for maybe a slightly cooler blast. Not worth the bother.
8 de July de 2026 at 08:45 in reply to: Guardality fit in a slim cardholder with 4 cards already? #4738Tommy Burrel
MemberIf it’s already snug, you’ll notice the difference. The Guardality card is thin, but it’s still another layer. I’d only bother if you don’t mind a tighter fit.
Tommy Burrel
MemberI mean, a rubber seal getting a little soft after a month sounds pretty normal to me. Probably just the material warming up from daily use. Unless it’s actually leaking or the cap doesn’t click shut anymore, I wouldn’t worry about it.
Tommy Burrel
MemberWorth a try if you don’t mind wasting the money. Ultrasonic stuff either bothers the dog enough to stop or it doesn’t, and stubborn ones usually just get used to the noise after a few days.
Tommy Burrel
MemberBoost mode is obviously going to eat through the battery faster, that’s just how it works.
30 de June de 2026 at 17:12 in reply to: Blink Outdoor motion detection zones – how precise are they? #4212Tommy Burrel
MemberI haven’t bothered testing the zones that hard, but my experience is they’re decent enough for bigger stuff like blocking a neighbors roof. For a tree branch though, good luck. That motion detection is pretty jumpy with small moving things like leaves.
The two zones thing feels more like a rough suggestion than a hard block. I’d keep the camera pointed where you want it and just tweak the sensitivity down a little instead of relying on the zones to be perfect.
Tommy Burrel
MemberIt’s just one more thing to plug in, but the battery on mine has been fine for a couple of weeks at a time. I just charge it when the motor starts sounding weak. Not a big deal.
Tommy Burrel
MemberNot really sure what everyone else is seeing. I tried one and the night vision was pretty weak past like 6 feet.
24 de June de 2026 at 08:50 in reply to: Does Qinux AquaSylk make much difference if your water is already soft? #3757Tommy Burrel
MemberIf your water’s already soft, you’re probably not missing much. The chlorine thing is whatever to me, I barely noticed a difference. Seems like one of those products that’s way more useful if you’ve got hard water problems. I’d say don’t overthink it, it’s just a shower head.
23 de June de 2026 at 06:40 in reply to: Is the Qinux BreezaMax quiet enough for a bedroom at night? #3675Tommy Burrel
MemberLow speed is quiet enough for me, but that faint hum people talk about is real if you’re picky about fan noise. It’s not loud, just a constant low buzz that might bug you. Depends on how much background sound you can tolerate.
-
AuthorPosts
