Mike in TX

Forum Replies Created

Viewing 26 posts - 27 through 52 (of 72 total)
  • Author
    Posts
  • Mike in TXMike in TX
    Member

    I’m in the camp that it doesn’t matter much. You get that initial colder hit for a few minutes, but the unit itself is just evaporating whatever you put in it. Once the water warms up to the room, same result. I just use tap water and don’t overthink it.

    Mike in TXMike in TX
    Member

    I wouldn’t overthink it. These things don’t really die on a schedule. If it’s still pulling scratches out after a few weeks, it’s probably got plenty of life left in it. You’ll notice when it stops doing anything, it just feels like a regular rag.

    Mike in TXMike in TX
    Member

    That pause is just how it behaves when it hits the temp it’s aiming for, or at least that’s what I’ve gathered from messing with mine. The fan doesn’t always shut down completely but it kind of hesitates and then picks back up. I wouldn’t go digging through settings or worry about a defect unless it starts doing it every few seconds or stops cooling altogether. I’ve had mine for a while now and it still does that little hiccup thing. You get used to it to the point where you don’t even notice it while sleeping. I’d just leave it alone and see if it keeps the room where you want it. If the temp holds and it’s not making weird noises, it’s probably fine.

    Mike in TXMike in TX
    Member

    Plug height is one of those things people overthink. I get the logic, gas rises, CO mixes with air, smoke goes up, so where the hell do you put one thing that detects all three? But honestly for a plug-in unit in a kitchen, you’re overcomplicating it. These things are designed for a standard outlet and the sensors are good enough that a couple feet one way or the other isn’t going to be the difference between life and death.

    I’ve got mine plugged in about counter height on the wall between the stove and the fridge. Not because I measured anything, just because that’s where the outlet was. It’s been fine. The real issue is people stick these things behind a curtain or shove them behind a toaster and then wonder why they don’t go off. Just keep it in the open, don’t hide it, and you’ll be okay.

    If you’re really worried about coverage, buy a second one for the bedroom. That’s a better use of your time than measuring inches off the ceiling.

    in reply to: Does the MozzDefense charge with any USB-C cable? #6397
    Mike in TXMike in TX
    Member

    It’ll charge with whatever USB-C cable you’ve got. I wouldn’t overthink it. The port is pretty standard, so as long as the cable isn’t totally dead, you’re good. I’ve used random ones around the house with mine and it tops up fine.

    in reply to: PestVault vs. the old peppermint spray I used to buy? #6393
    Mike in TXMike in TX
    Member

    Honestly, I don’t think it’s a huge deal either way. The spray works, but I got tired of the smell hanging around right after I applied it. The pouch is more low key. I just toss one in the back of the pantry and don’t think about it again until I happen to remember to swap it out a month later.

    That being said, if you’re used to the spray and it’s doing the job, switching isn’t some massive upgrade. It’s the same idea, just in a different package. I grabbed a pack mostly because I was tired of buying refill bottles all the time. If you don’t mind the spraying routine, stick with what you know.

    I’m not going to pretend one is dramatically better than the other. They both keep the mice out of my shed, and that’s all I really care about.

    in reply to: Does the WellHeater dry out the air much? #6370
    Mike in TXMike in TX
    Member

    Honestly, I’ve run mine in the garage while I’m out there tinkering and it’s no drier than any other heater I’ve used. My sinuses get a little annoyed if I’m right next to it for hours, but that’s pretty much par for the course with any electric heat source.

    The one thing I did notice is that the air seems to feel a bit “flat” after a while, if that makes sense. Not so much dry as just stale. But that’s probably more about my garage not having great airflow than the heater itself. I just crack the door a few inches and it’s fine.

    I wouldn’t stress about it. If your throat is getting scratchy, a glass of water nearby or a basic little humidifier would sort it out. It’s a decent little unit for the size, and I’d rather deal with a bit of dry air than freeze.

    Mike in TXMike in TX
    Member

    I’ve had mine for a couple weeks and I get the same click. Doesn’t bother me much, it’s not like it’s loud or anything. I’d just keep an eye on it if it starts getting sharper sounding.

    in reply to: StopWatt and older wiring, anyone tried it? #5850
    Mike in TXMike in TX
    Member

    I wouldn’t overthink the wiring age thing. It’s just a box that plugs in and lights up green, so it either works or it doesn’t. I’ve got old cloth wiring and mine has been sitting there doing nothing noticeable for months.

    Mike in TXMike in TX
    Member

    I’ve seen a few people say they get close to 6 days if they keep the ring off the charger and don’t fiddle with the app constantly. The magnetic charger is quick enough that a quick top-off during a shower probably keeps it going.

    in reply to: Does the Aptofit actually need a phone nearby to work? #5497
    Mike in TXMike in TX
    Member

    From what I’ve seen, the Aptofit doesn’t have its own GPS. If you want distance or maps you’re tethered to the phone. Step counting works fine standalone though.

    Mike in TXMike in TX
    Member

    The heat is definitely mild, not what I’d call hot, but it’s enough to take the edge off while the traction is doing its thing. I think it’s more of a complementary feature than a standalone heater, so it’s not completely useless.

    in reply to: Does SavingStars work for really slow kitchen drains? #5086
    Mike in TXMike in TX
    Member

    I’ve seen it around too but haven’t tried it for kitchen drains yet. I mostly use it on the bathroom sink and it helps with the smell more than anything else. Kinda doubt foam alone cuts through a bunch of old grease without some manual help.

    Mike in TXMike in TX
    Member

    I think you’re overthinking it. If you run it on low it’s basically just a fan with a little pump, so the juice it uses is pretty negligible. I’d rather have the airflow than worry about a couple of bucks.

    in reply to: Earscribe on iOS vs Android? #4624
    Mike in TXMike in TX
    Member

    Honestly, I think people overthink this. They’re earbuds that connect to an app, it’s not some platform-exclusive thing. Mine works fine on Android, and I’ve seen it work on an iPhone with no real difference.

    Mike in TXMike in TX
    Member

    Disagree. I think it works fine on fabric, you just gotta accept it’s not gonna look like a magic trick. Steam loosens stuff up, but you still gotta wipe or vacuum after.

    in reply to: GrillWizz battery life on high speed? #4307
    Mike in TXMike in TX
    Member

    Running it on high the whole time, you’re probably looking at closer to 45-50 minutes than 90. Still enough to clean a couple of grills if you’re not scrubbing for ten minutes straight on each one.

    Mike in TXMike in TX
    Member

    It’s been fine for me. I notice the red light when I push too hard, but honestly I don’t think about it much. Works well enough for what it is.

    in reply to: Is the WellHeater supposed to be silent when it’s running? #3950
    Mike in TXMike in TX
    Member

    Mine makes a little noise, but I wouldn’t call it a hum. More of a soft clicking sound when it kicks on and off. Doesn’t bother me, but I’m not super sensitive to that stuff.

    Mike in TXMike in TX
    Member

    The blade feel thing is overblown in my opinion. I’ve been using mine for a couple months now and I don’t notice any difference versus a good wood board once you’re actually cutting.

    in reply to: Qinux BlastVul battery life enough for a car wash? #3774
    Mike in TXMike in TX
    Member

    I’d guess you’ll be fine. I’ve washed my truck with it and the battery held up long enough to get the job done. Not like I was watching the clock or anything.

    in reply to: Does the Qinux Gravizer actually work on glass? #3245
    Mike in TXMike in TX
    Member

    It works if you just let the tool do the job. I’ve used mine on a few glass pieces and never had it skip or scratch anything, even on some cheap wine glasses. People overthink it.

    Mike in TXMike in TX
    Member

    I wouldn’t count on it fixing the problem completely. In a quiet room it helps some but I still think you’re better off just turning the TV volume up a notch or using the closed captions.

    in reply to: Does the Keilini Heater Pro actually heat a whole room? #2622
    Mike in TXMike in TX
    Member

    Yeah, it works fine

    Mike in TXMike in TX
    Member

    Green light just means it’s plugged in and getting power. Hard to say if it’s actually doing anything without a meter or something to compare.

    Mike in TXMike in TX
    Member

    It’s probably just a bonus feature, not the main reason it works. I wouldn’t lose sleep over it.

Viewing 26 posts - 27 through 52 (of 72 total)