Forum Replies Created
-
AuthorPosts
-
7 de September de 2026 at 20:20 in reply to: AerioQ wall mount okay for a room that gets afternoon sun? #10047
Sarh_Kompress
MemberI have one in a south facing room that gets hammered by sun until around 6pm. It handles it, but I wouldn’t say it makes the room cold, it just stops it from getting miserable. If you’re expecting a blast of arctic air the minute you walk in, you’ll be disappointed. Fine for keeping things comfortable, not for dramatic temperature drops.
6 de September de 2026 at 14:50 in reply to: CoolCove vs my old space heater, is the heat similar? #9857Sarh_Kompress
MemberI ended up keeping mine but it definitely took getting used to after the radiator.
Sarh_Kompress
MemberMine has been pretty quick honestly. The alert usually lands within a second or two of him stepping out, at least on my phone. I did notice the app itself sometimes takes a moment to refresh the map, so the notification is fast but the live location can look a bit laggy right after.
Sarh_Kompress
MemberOutdoor mode helped with voices for me, but I never expected it to fully kill wind. I found that the breeze noise comes and goes more than it used to, which was good enough for my purposes. If your dad is standing in a really open windy spot, nothing is going to fix that completely. It’s more about whether the tradeoff is worth it for him.
3 de September de 2026 at 09:43 in reply to: Does the Qinux Pixgo 4K come with a memory card or do I need to buy one separately? #9354Sarh_Kompress
MemberI’d just grab one before you open the box. I picked mine up without checking and ended up sitting there with the camera in my hands scrolling through my phone for an hour. These things basically never show up with a card included, no matter what the pictures on the listing suggest.
25 de August de 2026 at 01:39 in reply to: Qinux BittOne: does it come with a screen protector or do I need to buy one? #7969Sarh_Kompress
MemberI’d just grab one anyway. Even if it does come with a factory film, those are usually more for shipping than actual protection. A cheap glass one will save you the headache later.
20 de August de 2026 at 15:56 in reply to: Does the BareEarth Grounding Mat stay put on a hardwood floor? #7540Sarh_Kompress
MemberI found the non-slip backing is fine on hardwood, but the bigger issue is that dust and crumbs get under it over time and make it shift a bit. A quick sweep under it every couple weeks fixes that. Other than that it stays put during normal use.
18 de August de 2026 at 13:57 in reply to: MixMate battery life vs. how often you actually use it? #7404Sarh_Kompress
MemberDepends what you’re mixing honestly. I use mine for protein shakes after the gym and I’m already on my second set of batteries after about two weeks. The thicker stuff seems to make the stirrer work harder. Light matcha use probably won’t drain them as fast but I wouldn’t count on it lasting forever.
Sarh_Kompress
MemberI got a full day out of mine but I wasn’t exactly chattering nonstop. I’d say it was around 8-9 hours of on-and-off use with it sitting in my bag between conversations. If you’re planning on using it heavily all day, I’d still toss a power bank in your bag just to be safe.
Sarh_Kompress
MemberFoam that high seems like a lot honestly. I get that it shows it’s working, but when mine did that I figured I just dumped in too much powder. Next time I used less and it still bubbled up but not as crazy. So yeah, you probably used more than needed.
12 de August de 2026 at 16:12 in reply to: ODIN SafeWave EMF on a smart TV, any reason not to? #7032Sarh_Kompress
MemberThe adhesive will be fine, I wouldn’t sweat that part. But honestly, if you’re putting it on a TV that’s in a cabinet or right against a wall, just double check it’s got some airflow. I had one on a receiver that got pretty warm and it stayed stuck, so the TV should be no problem at all.
3 de August de 2026 at 15:16 in reply to: Qinux Vibrathea vs my old tens unit, anyone else notice the pads feel different? #6401Sarh_Kompress
MemberDifferent pads on different units is pretty normal I think. I had a cheap no-name TENS years ago and the pads were almost spongy, these ones are definitely more like a sticker. But honestly they do the job for me. I use mine maybe every other day and I haven’t had sticking problems yet, but I also don’t push it for weeks on end. If they start slipping I’ll just replace them, they’re not that expensive. I get why it feels like a downgrade if you’re used to the old style, but I don’t think it’s a big deal. The unit itself works fine and that’s what matters to me.
29 de July de 2026 at 13:43 in reply to: Mounting the Qinux ScryneX on a brick wall – any tips? #6056Sarh_Kompress
MemberI think people make brick mounting sound harder than it is, but I also get being cautious about it. For something this light, I doubt you’d run into real trouble as long as you use the right bits. The bigger question for me is whether the screen holds up well outdoors over time, not just the mounting part.
Sarh_Kompress
MemberIt’s a fan, not a white noise machine. If your old one sounds like a jet, this will be a huge step up even on medium.
26 de July de 2026 at 22:55 in reply to: Does the Epicooler need to be near a window for the cooling to work? #5896Sarh_Kompress
MemberI guess it depends on what you’re expecting from it. I personally prefer the idea of not having to mess with a window hose, even if it means the cooling is more localized. Seems like a tradeoff that works for some people.
24 de July de 2026 at 11:25 in reply to: Wood Ranger Power Leaf Blower ok for blowing off a deck? #5828Sarh_Kompress
MemberI think the 15 minutes would probably get you through a deck and a garage sweep if you’re not too fussy about it. I’m not totally sure how it handles heavier dust though, might depend on how packed your garage is.
19 de July de 2026 at 20:00 in reply to: SawShark normal to need a bit of pressure or am I doing it wrong? #5532Sarh_Kompress
MemberMine felt a little stiff at first too but I figured it’s just the file seating into the groove properly. I noticed if I don’t keep the angle dead straight it wants to skate more than bite. Does the job once you get the hang of it though.
19 de July de 2026 at 13:36 in reply to: Qinux BitBip 89 wireless controllers any good for bigger hands? #5507Sarh_Kompress
MemberI’ve seen a few people mention the controller size, but honestly I think it’s more about grip than hand size. The shape is pretty standard, nothing special, but not terrible either. If you’re used to smaller controllers from the old days, these might feel fine.
18 de July de 2026 at 17:36 in reply to: Back Restore heat setting – is it actually useful or just a gimmick? #5458Sarh_Kompress
MemberI mean, it’s not like it’s gonna cook you, but I do notice it a little if I’m cold. Probably not the main selling point though.
15 de July de 2026 at 14:46 in reply to: Mouth taping at night worth it if I already use a humidifier? #5251Sarh_Kompress
MemberI’d say go for it just to see, the humidifier handles dryness but the tape is more about keeping your breathing steady. They tackle different things so it’s not really one or the other.
13 de July de 2026 at 12:49 in reply to: Dustaclean nozzle for keyboard use – does it actually fit? #5114Sarh_Kompress
MemberI got one mostly for the crevice nozzle, which works pretty well between key rows. The brush is whatever, I barely use it.
Sarh_Kompress
MemberI’ve had mine for about six weeks and honestly haven’t noticed any softening yet, but I mostly use it for cold water so maybe that helps keep the rubber firmer.
Sarh_Kompress
MemberI think it’s probably just the weight of the steel wires throwing it off a bit when the ground isn’t level. Mine does the same thing on my patio edges, but I just slow down a little and it’s fine.
1 de July de 2026 at 14:43 in reply to: Does the AiraBreeze actually help in a humid room or just make it worse? #4279Sarh_Kompress
MemberI think it depends on the room honestly. I’ve used mine on humid days and it didn’t make things worse, just didn’t cool as much as on a dry day. The airflow alone still felt nice when I pointed it right at me though.
1 de July de 2026 at 05:03 in reply to: Blink Outdoor motion detection zones – how precise are they? #4233Sarh_Kompress
MemberI think people make it sound more complicated than it is. I just drew a box over the corner of my yard where a bush was triggering it and it stopped, driveway still works fine. You might have to play with the size a little but it’s not that fussy.
Sarh_Kompress
MemberAlright, thanks for the input everyone. Sounds like it’s not a big deal to just charge it when I remember, so I’ll probably pick one up and stop overthinking it.
30 de June de 2026 at 09:14 in reply to: CarbonOne Safe vs old plug-in CO detector: does the display stay on all the time? #4181Sarh_Kompress
MemberAlright, thanks for the replies. Sounds like the screen is always on but dim enough, so I’ll just grab one and see how it goes in the bedroom.
-
AuthorPosts
