Forum Replies Created
-
Posts
-
I plugged a similar little HDMI stick into my bedroom TV a few months back and had the same two port panic. What I noticed is that the stick doesn’t really care what the TV does with audio, it just sends the picture and sound to the TV like any other device. The TV then decides where that audio goes, and since your soundbar is already set up on the other port, it should keep doing its thing. Mine just worked without me touching any settings, which was a relief because I’m not big on menus. The one thing I did have to do was make sure the stick was actually selected as the input, otherwise the soundbar was happily playing silence from the TV channel. That part took me a minute to figure out, which is a bit embarrassing. So short version, you shouldn’t need to swap cables around every time. Just pick the right input and let the TV handle the rest.
Shelf above a desk is a tricky spot for these little coolers. I’d guess you’d feel it more on your hands and keyboard than your face, but that might be all you need if you just want some air moving.
Two weeks isn’t really enough to judge a filter honestly. I went back to a plain head after about six months because I couldn’t tell a difference once the newness wore off. If you’re not noticing anything obvious by now, the swap probably won’t feel worth it long term.
Half full actually seemed to make mine worse. I tried it that way on a road trip and the water started smelling off way faster than when I fill it up. So I don’t buy that it works just as well when it’s not full.
The meds thing is the one that actually worries me. Ours are fine at room temp for a few days, so I just don’t bother with coolers and ice packs. If the outage was going to run past that I’d probably just call the vet and ask what to do. Not really a setup, but it’s one less thing to mess with.
I mostly just stick with the file and call it good enough for the day. What gets me is the rakers, if those are off the chain feels dull even after a fresh sharpen and I end up chasing my tail. A stone hasn’t really come up for me out there.
Mine took about two weeks to come out during the day, but she still bolted under the couch whenever I dropped something. I just went about my normal routine and let her come to me. She was sleeping on my pillow by day ten.
Mine actually got a bit more foamy after I swapped heads, so I’m not sure it’s a universal thing. Could just depend on what’s in your water to start with. Either way I’ve been happy with mine after a couple months.
I pull mine out after every use just because it’s easy enough to click back in. It takes two seconds and I’d rather not leave it sitting in a cold shed for weeks. The click is pretty obvious once you feel it, not fiddly at all.
First time I charged mine I sat there watching that red light like it was going to tell me a secret. It stayed red for close to two hours and I finally unplugged it because I was convinced something was wrong. Turned out it was just a slow first charge. The next few times it finished way faster and I stopped paying attention to the light altogether.
What I go by now is the battery itself. When it’s done, the little indicator on the pack stops blinking and just holds steady, and the pack feels a bit warm but not hot. That’s been more useful to me than the charger light, which on mine has basically one mood. Red forever.
I get why you’re asking though, the manual reads like it was written by someone who never touched the thing. If yours ever does change color, great, but don’t count on it being the signal. Just pull it once the pack indicator settles and you should be fine. I’ve been doing that for a few months now and the battery still holds a decent charge, so I don’t think I’ve cooked it yet.
Movement is the main issue with any ring, not the software. I wore a different ring for a few months and it was fine on the bike since my hand stays put, but running was hit or miss until I switched fingers. Pinky gave me way more stable readings than my index finger for whatever reason.
I plug mine into the car USB pretty often and it’s held up fine, though I mostly do it because it’s already sitting there. If I’m at home I’ll grab the wall plug since I feel like it tops off faster, but it’s not something I’ve ever lost sleep over.
Mine actually stays put pretty well even when I flip around, but I wake up on my stomach sometimes and that’s when it stops making any sense. The shape just isn’t built for that. So if you end up on your back or side like you said, you’re probably fine.
I’ve got one USB too and honestly the adapter just lives in it. I still charge my phone with a regular wall plug at home, but in the car I mostly just leave it. So yeah, that port is basically gone.
Mine has one stubborn crease near the middle that never fully disappeared, even after hanging it for a while. What actually helped was switching to rolling it around a cardboard tube from an old wrapping paper roll before it goes in the bag. Folding it the same way every time just kept pressing the same line back in. It’s not perfect now, still slightly visible if I look for it, but way less obvious during a movie. I don’t think these fabric screens ever get completely flat unless you go with a fixed frame, but the rolling thing made a bigger difference than I expected. Worth a shot if you’ve got an empty tube lying around.
Mine actually did need a new cord, but not because it wore out from normal use. My setup got moved around a lot since I use it in different spots, and the little clip part got bent out of shape after maybe three months of constantly unplugging and repositioning it. The mat itself was totally fine, it was just that connection point that stopped sitting right. So I guess my take is that it depends way more on how you handle it than on some kind of timer. If yours just stays under the desk and you never really touch the cord, you probably won’t run into what I did. I ended up just ordering a replacement cord since it was cheap enough, and honestly the mat has been working the same as before. So yeah, not really something that expires on its own in my experience.
I left mine on for about a month and got used to it, but my phone is usually on silent anyway. The alerts are pretty easy to tweak so they only go off for actual birds and not every leaf that moves. If yours gets a few birds a day now, you’ll probably get a handful of pings, not a flood.
Mine’s been on my keyring since spring and I ping it at least a few times a week, usually while I’m halfway out the door. The app hasn’t been a battery issue for me either. If you just want something to beep when you’re rushing, this does that fine.
I ended up using mine mostly while lying in bed or folding laundry, so the cord thing never really registered as a big deal to me. The way mine works is the mask itself is what goes on your face, and then there’s a little controller that the wire plugs into. You charge that controller separately, then you’re basically tethered to it while the mask is on. So you’re not stuck next to an outlet exactly, but you’re also not totally free to roam the house either.
I think the confusion comes from the product description throwing around “wireless” when they mean the mask isn’t plugged into the wall directly. Once I got mine I stopped caring about the wording, since sessions are only like 15 minutes anyway. I usually just sit on the couch and scroll my phone. If you genuinely want to walk around doing chores with it on, that’s where it might bug you a bit. Otherwise it’s fine.
Mine left more than a faint ring when I pulled it off my old Corolla. There was a little circular patch where the rubber had basically baked onto the glass after a summer of sitting in the sun. Glass cleaner did nothing for it, but a plastic razor blade and some goo gone got it off in a couple minutes. The weird part is the ring came back a few weeks later even though the mount wasn’t there anymore. Turned out it was actually on the inside of the glass, like some kind of residue or coating thing that showed up when the light hit it right. Never fully went away either. So if you’re moving it to a car you actually care about, maybe think about where you stick it, because on a beater it doesn’t matter but on something nice it’s annoying.
I’ve gone back and forth on this with a couple of cheap watches and the app situation is usually messier than people make it sound. With mine, I started on the app it came with, then got curious and tried syncing it to a different one I already had on my phone. The steps showed up but the sleep data just never made the jump, so I ended up with two apps showing two different versions of my day. That got old fast. I don’t think you’re going to break the watch by poking around, it just records stuff on its own and the app is more of a window into it. So if the manual is vague I’d say just try what you’ve got and see what actually pulls through. Worst case you delete the extra one.
15 minutes is the sweet spot for me. I tried cutting it to 8 or 9 once and my back felt about the same as not using it at all, so I just stick with the full session now.
I don’t think the ultrasonic part is really about scraping power. I had a basic metal pick and yeah, if I sat there chipping away long enough it would eventually pop some tartar off. Got a DappSmile mainly because my hands would cramp up trying to keep steady pressure with the manual one. The buzzing tip does the work for you so you’re basically just guiding it along the tooth instead of pushing hard. Took me a bit to stop pressing like I did with the metal pick since that just made my gums angry. For light stuff near the gumline it’s less of a fight. The hard chunks still need the same patience either way. So it’s not a different job, just a different feel in your hand.
