Forum Replies Created
-
AuthorPosts
-
1 de September de 2026 at 10:27 in reply to: Enence Translator for quick chats with non-English speakers? #9045
Greg T.
MemberI took mine on a trip last year and honestly, the carrying another device thing was my biggest hangup too. But after the first day I just threw it in my jacket pocket and forgot about it. It’s small enough that it didn’t feel like extra baggage.
For the casual stuff, it works. I used it more for quick back and forths where pointing and grunting was getting old. The translation speed was fine for that. I wasn’t trying to have deep conversations, just get a bus ticket or ask if a place was open.
What I noticed is that it kind of changes the vibe. People seem more patient when you hand them a little gadget than when you’re both staring at a phone screen. I guess it feels less awkward. I wouldn’t bring it on every trip, but for a short trip where you know the language barrier will be real, it did what I needed.
Greg T.
MemberGood to know it’s not just me then. Thanks for the input, everyone.
30 de August de 2026 at 18:08 in reply to: AiraBreeze water level window, is it supposed to fog up? #8783Greg T.
MemberI think that’s just what happens with these things honestly. Mine does the exact same thing and I’m coming up on three months with it now. The window gets that hazy film on it after it runs for a while, especially if I’ve just refilled it with cooler water. I can still see the level good enough, so I never really thought much of it.
What I did notice is that it seems to clear up on its own after the water sits in there for a bit and warms up to room temp. So I just kind of stopped paying attention to it. As long as I can tell when it needs a refill, it doesn’t bother me. Probably just condensation or something from the temperature difference, nothing that seems like a defect or anything.
29 de August de 2026 at 14:55 in reply to: Does Repellio work behind furniture or do I need to move things around? #8607Greg T.
MemberI moved mine around a few times and honestly could never tell a difference in how often I saw anything in the kitchen. The only thing I noticed is that it seems louder, or at least more noticeable, when it’s in a smaller room. I think the furniture blocking it matters less than just having enough open space around the unit itself, but that’s just a guess.
29 de August de 2026 at 04:25 in reply to: Does the Qinux Vapoxis work well on bathroom mirrors? #8531Greg T.
MemberI was skeptical about steam on glass too, but it actually dries fast and leaves a clean finish. I used mine on a bedroom mirror and it was fine, no fog left behind. Just wipe it off quick while the steam is still working and you’re good.
27 de August de 2026 at 11:58 in reply to: CarbonOne Safe vs old detector: is the beep pattern different? #8275Greg T.
MemberI noticed the same thing when I swapped mine in. It does those short chirps first and then the full alarm kicks in if it’s still detecting something. I just figured that was the new normal for this model, so I wouldn’t stress about getting a weird unit.
Greg T.
MemberMine sits on a little side table right next to the bed, maybe a foot from the headboard. The cord reaches fine from the outlet behind the nightstand, so no issues there. I just make sure nothing like a curtain or throw blanket is hanging over the top of it and it’s been fine.
25 de August de 2026 at 17:22 in reply to: Does the ResQVac really clear the airway in one pull? #8076Greg T.
MemberThe one pull thing is probably more about how you position it than the device itself. If the mask seals right and you get the angle right, I’d guess it usually works in one go, but I wouldnt treat that like a hard promise. It’s a backup tool, not magic. Good to have around, just dont overthink the marketing.
25 de August de 2026 at 06:08 in reply to: Does the Qinux Klampero work on chains with different pitch sizes? #7998Greg T.
MemberMine hasn’t cared about pitch much, honestly. I’ve swapped it between a couple of different chains and it just sat down and did the job. Maybe I got lucky with the tooth profiles, but I haven’t had to fiddle with it beyond basic alignment.
24 de August de 2026 at 03:26 in reply to: Qinux HydroXeltor on windows, does it leave streaks? #7883Greg T.
MemberFunny you mention that, because I had the exact same first impression when I tried it on my house windows. I was starting to think I was using it wrong too. But after a couple more tries, I kind of changed my mind about it.
I noticed the film was mostly there when I was too close to the glass or using the highest pressure setting. It almost felt like the water was bouncing back and drying weird. When I stood back a bit more and let the water do its thing, it seemed to clear up a lot better. Still not perfect, but way less streaky than I thought at first.
It is still my main tool for the patio and the car, that’s where it shines. For the windows I would say it’s fine for a quick rinse, but if you want that spotless, no-streak look, you are probably still going to need a squeegee or a cloth after. I don’t think it’s a defect or anything, just the nature of the thing. It’s not a proper window washer, it’s a hose nozzle that happens to work okay on glass.
I haven’t fully given up on it for windows, just adjusted what I expect from it.
12 de August de 2026 at 20:07 in reply to: Does the iTagPro geofence alert actually work when you leave a place? #7047Greg T.
MemberI get the concern about delays but honestly mine has been pretty reliable. It usually pings me within a minute or so of me walking away from my stuff. Not instant but definitely fast enough that I wouldn’t call it a miss.
10 de August de 2026 at 09:55 in reply to: Is the Qinux VultrioX supposed to throw a bit of debris while cutting? #6874Greg T.
MemberI kinda like that it throws stuff honestly. Means it’s actually grabbing the material instead of just bending around it like the nylon line did. I usually just angle the head a bit different when I’m near the house and it keeps most of it off the windows and siding.
9 de August de 2026 at 15:42 in reply to: FitiBeats touch controls – do they ever get less finicky? #6831Greg T.
MemberFrom what I’ve seen it’s kind of a lottery with these. Mine have been fine after the first couple of days, but my buddy has the same pair and his are still doing the random pause thing. I just grab them by the case when I’m taking them out and that seems to do the trick for me.
3 de August de 2026 at 18:44 in reply to: PestVault vs. the old peppermint spray I used to buy? #6414Greg T.
MemberGood to know, sounds like the pouch is the lazy route and the spray is more of a hands-on thing. I’ll probably just stick with what I got for now, but I might grab one if I see it on sale.
Greg T.
MemberI guess I’m in the minority here, but I really haven’t noticed much dryness with mine. I’ve got it in a smaller spare room and the air feels fine to me. Maybe it just depends on how long you run it or how dry your house already is.
Greg T.
MemberYeah that’s pretty much what I figured. The fan mode is more of a background thing than something you’d sit in front of. I stopped expecting much from it and just let it do its thing when I’m not using the cooling side.
Greg T.
MemberI haven’t really worried about formatting mine. It just keeps recording over the old stuff. I think people overthink it sometimes.
29 de July de 2026 at 14:55 in reply to: Mounting the Qinux ScryneX on a brick wall – any tips? #6060Greg T.
MemberI’d just use some decent masonry anchors and take it slow with the drill, no need to overcomplicate it. The screen’s light enough that you won’t need to stress about it pulling out.
21 de July de 2026 at 19:27 in reply to: Coolizi Coolzy for a bedroom that gets afternoon sun? #5666Greg T.
MemberI’ve got one in a room that bakes in the late afternoon and it does a decent job. It won’t turn it into a fridge or anything, but it keeps it from getting stuffy.
18 de July de 2026 at 08:01 in reply to: Glokore Therapy Mask worth it for acne or more for anti-aging? #5420Greg T.
MemberI got mine for the anti-aging stuff but honestly I use the blue light way more just because it feels like it’s doing something. Not sure if it’s actually clearing anything up or just feels nice after a breakout.
Greg T.
MemberI just use the 2-hour setting pretty often and it shuts off right when it’s supposed to so no complaints here. Not sure about half-hour increments or anything like that though. Works well enough for me just to warm up the room before bed.
16 de July de 2026 at 15:56 in reply to: Pro Capture battery life when using WiFi for the app? #5319Greg T.
MemberI mean, WiFi is pretty much always gonna eat battery on any camera, so I wouldn’t panic about it. I just flip mine off once I’m done framing the shot and it seems fine.
15 de July de 2026 at 13:39 in reply to: JetClean battery life on patios — does it last long enough? #5246Greg T.
MemberI’d just give it a go and see. If your patio isn’t huge, you’ll probably be fine as long as you don’t let it idle too much between spraying.
14 de July de 2026 at 08:04 in reply to: Flixy setup question – can I keep it plugged in all the time? #5158Greg T.
MemberI just leave mine plugged in and haven’t had any issues. It’s not like it’s gonna wear out from being connected, it’s designed to stay on. Honestly, I’d just set it up and forget about it.
-
AuthorPosts
