Daniele Rossi

Forum Replies Created

Viewing 30 posts - 31 through 60 (of 93 total)
  • Author
    Posts
  • in reply to: Ryoko Pro coverage in rural areas, actually usable? #10128

    I’ve used mine in a pretty remote valley with maybe one bar, and it held a connection when my phone couldn’t even load a map. Not fast, but it worked for messaging and checking routes. So I wouldn’t write it off completely just because the coverage map sounds too good.

    in reply to: Is the Qinux BlastVul easy to carry around or is it bulky? #9622

    I was curious about the same thing before getting mine. It’s not the kind of thing you forget you’re holding, but I wouldn’t call it bulky either. The weight is distributed okay so it doesn’t feel like it’s pulling your arm down after a bit. I mostly move it from the back step to the driveway and around to the side of the house, so maybe ten minutes of carrying total. I can manage it with one hand while picking up a chair or moving a bucket with the other. Probably not something I’d want to hike around a big property with, but for a normal yard it’s fine. The battery adds some heft but not an unreasonable amount. If you’re expecting it to feel like a toy you’ll be surprised, but if you’ve held a decent cordless drill before, it’s in that neighborhood.

    I get what you mean about the prickly feeling. I noticed the same thing when I first turned mine up past the middle levels. It kind of settled down after a few sessions once I got used to it, but I also found that moving it slightly on my shoulders helps. If it feels too intense, there’s no shame in keeping it a bit lower.

    in reply to: Do the SonaBuds pick up background noise during calls? #9483

    I’d want them to block out street noise, not just voices.

    I’d say it’s more of a maintenance tool than a stain eraser. If your coffee stains are fresh and light, it seems to help keep them from building up. But if they’ve been there a while, you’re probably better off saving the money for a cleaning.

    Honestly I’d just budget for one. I picked mine up secondhand and it came with a tiny 16GB card that was basically useless for 4K anyway. You’re gonna want a bigger one right away, so might as well factor that in.

    in reply to: Glacier Breeze placement on a desk, does it matter? #8875

    Placement makes a difference but not in the way people expect. I keep mine about arm’s length away and angled slightly off to the side, otherwise the evaporative effect just feels like a wet breeze hitting one spot. Close up works, but you get way more consistent coverage from a little distance.

    in reply to: Matsato balance when cutting? #8555

    Good to see I’m not the only one who noticed the weight distribution. I loosened my grip like someone mentioned and it did feel better after a couple days. Probably just needed to find where my hand naturally lands.

    in reply to: Qinux Zindoggo safe zone vs old fence setting, how exact is it? #7944

    I think people expect too much from these things honestly. The Zindoggo gives you a clear heads up when your dog crosses the boundary, not a scientific measurement of where exactly he is every second. I’d rather have that than the old tracker I had where I was constantly checking the app to see if he was still home. It just makes the whole wandering thing way less stressful.

    I think people expect too much from a shower head when it comes to limescale. It can soften the feel of the water, sure, but it is not going to stop hard water spots from forming on your tiles or glass. I would look at it as a comfort upgrade, not a solution for buildup.

    in reply to: Ozoori placement in a small fridge, any spots that work better? #7699

    Honestly I don’t think the door is a great spot just because it’s warmer there and the thing works off air circulation. I keep mine on a shelf near the back and it’s been fine. As long as it’s not buried behind stuff it probably doesn’t matter that much.

    in reply to: Does the JetClean work okay if you just use a bucket? #7251

    I think it really depends on how much patience you have. I tried the bucket setup a few times and it worked, but I wouldn’t call it effortless. The suction does its job, but you can feel the difference compared to when it’s pulling straight from a hose. The spray stays consistent for a while, then you notice it starting to sputter a bit as the water level drops. Not a huge deal if you’re just doing a quick rinse, but for a full wash you’ll be topping it off more often than you’d think. I ended up just using a bigger container than the standard bucket and that helped a lot. It’s not a dealbreaker, but if you’re expecting a steady strong stream the whole time, you might find it a little annoying.

    in reply to: SleepZee fit after a few weeks, does it loosen up? #7083

    Mine actually got slightly tighter after remolding it a second time.

    in reply to: Does MrBold Pro actually work on thick nose hair? #6738

    I’ve got coarse hair too and the rotary blade on mine handles it, but I wouldn’t say it’s completely pull-free. It’s more about not pressing too hard and keeping the head clean. I’ve had it snag once or twice when I was rushing, but nothing that made me stop using it.

    I think the SIM slot is pretty standard on these. The included one is probably just their own eSIM or a preloaded card to get you going, but I’d be surprised if it was soldered in or anything. Most of these travel routers let you swap in a local SIM when you land somewhere, which is nice if you find a better deal. That’s usually the whole point.

    in reply to: Does the WellHeater dry out the air much? #6351

    I was a bit worried about that too when I first got mine, mainly because I run it in my office while I’m working from home. I haven’t noticed my skin feeling tight or anything like that, but I do keep a glass of water on my desk anyway, so maybe that masks it a bit. What I did notice is that the air in my office feels noticeably warmer faster than with my old radiator style heater, so I’m not running it as long. That probably helps with the dryness factor too, since it’s not blasting heat all evening. I think if you’re sensitive to it, a small humidifier would fix it, but I wouldn’t call this one particularly bad. It seems like a normal heater thing to me, not something specific to this unit.

    in reply to: Qinux Dogitek vibration mode not as strong as I thought? #6096

    Lower levels are usually like that on these collars. Doesn’t seem like a big deal to me.

    in reply to: Qinux BittOne and save states – does it actually work? #6055

    I just use the in-game saves mostly, so I haven’t really tested save states much. But when I have used them, they worked fine for me. No crashes or anything like that.

    in reply to: Qinux AquaSylk filter replacement cost? #5989

    I’ve had mine for about six months now and I’m still on the first filter. Honestly I just replace it when the water starts feeling a bit weaker.

    I’d say it’s probably fine for both if you just want something simple. I wouldn’t worry too much about it being aimed at one thing over the other.

    I’m curious about this too. The wide setting seems safer, but I bet the concentrated stream would make quick work of moss. Maybe it depends on how dirty the siding really is.

    I’ve had mine running in a room about that size and it cuts the humidity enough to make a difference. Not gonna blast cold air everywhere, but it takes the sticky edge off. I’d say it’s worth it for summer nights.

    in reply to: Does the SleepZee actually help with mouth breathing? #4833

    I get what you’re saying, but I think the vents do help a bit more than people give them credit for. I noticed less mouth dryness with mine, even if my mouth isn’t perfectly shut all night.

    I keep going back and forth on getting a pair. The tint thing sounds like it could get annoying, but I mostly just want them for cutting glare on long drives.

    Do they feel okay for wearing a few hours straight, or do they get uncomfortable?

    I mostly use mine on car seats and it takes a couple passes there too. Doesn’t bother me much, I just figure that’s how steam works on fabric.

    in reply to: Does rain-x stuff actually make cleaning windows easier? #4449

    I think it probably depends on the dirt. For basic dust and light grime it might help a bit, but I’m not totally sure it’s worth the effort.

    Honestly, if you’re just tossing one in a big garage I’d keep expectations low. I put a couple in a closet and it’s been fine, but I’m not sure it’d do much in a wide open space.

    Pretty sure it works fine. I used one with a Netgear router and it just showed up as an access point after plugging it in. No weird setup issues.

    in reply to: Does the Qinux AirdrobeX really handle wool sweaters well? #3930

    I’ve dried a couple of thick wool sweaters in mine and they were fine. No shrinking or weird stretching. I just set it on the lowest temp and didn’t leave it in there too long. Good enough for me.

    in reply to: Qinux BittOne battery while playing on TV? #3834

    I figure if you’re already sitting in front of the TV, plugging it in is just easier anyway. I’ve used mine a few times that way and didn’t even check the battery, just kept it charging. Works fine for me.

Viewing 30 posts - 31 through 60 (of 93 total)