Cecily

Forum Replies Created

Viewing 30 posts - 31 through 60 (of 89 total)
  • Author
    Posts
  • in reply to: Coolizi Coolzy on carpet: any airflow concerns? #10018
    Cecily
    Member

    I’d say carpet is fine as long as it’s not blocking the airflow underneath.

    in reply to: Does Qinux AquaSylk remove the chlorine smell or just reduce it? #9587
    Cecily
    Member

    Honestly I’d skip it if the chlorine smell is your main problem. A shower filter only does so much with what’s already coming through your pipes. I had similar water and mine barely touched the smell, it just made it slightly less sharp. You’d probably get more out of fixing the water at the source or just airing out the bathroom after.

    in reply to: Keilini Heater Pro noise level in a bedroom? #9179
    Cecily
    Member

    Good to know I’m not the only one who can sleep through it.

    in reply to: Tagsley wallet placement and Find My accuracy? #9154
    Cecily
    Member

    It works okay for a broad area, but I would not call it accurate. I have had mine show the right building while the card was in a coat pocket, and other times it puts me a street over when it is in my car. Good enough for a general idea, not for finding the exact spot.

    in reply to: Does the MixMate handle thicker drinks like protein shakes okay? #9153
    Cecily
    Member

    I’ve used mine with heavier shakes and it gets the job done. No lumps floating around, but it’s not going to make it super smooth either. Good enough for me since I’m usually drinking it on the way to work anyway.

    Cecily
    Member

    Mine was fine from night one, but I’ve also used a memory foam pillow before so maybe I was used to the feel. The shape still took a couple of days to get used to though. If you’re not waking up stiff, I’d say that’s a good sign already.

    in reply to: Does the DrFlexa get warm after wearing it all day? #8616
    Cecily
    Member

    I’ve worn mine through some pretty long days and honestly I don’t notice it getting especially warm. Maybe I just don’t run hot or my knee is used to it, but it hasn’t been an issue for me. It’s not like it’s freezing, but I wouldn’t call it uncomfortable either.

    in reply to: Does GrillWizz handle the grates while they’re still warm? #8505
    Cecily
    Member

    I usually wait until the grill is off but still radiating heat, maybe 5-10 minutes after cooking. It doesn’t need to be scorching, just warm enough that the grease hasn’t re-solidified. The brush head is stainless steel so I don’t see how a warm grate would hurt it. I’ve done this for a couple months now and no issues.

    Cecily
    Member

    Honestly I think a lot of the “it slides off” stuff comes from people expecting it to stay put like a backpack while they’re walking around doing chores or whatever. I use mine when I’m parked at my desk or leaning back on the couch and it stays fine without me holding it. The strap does its job if you actually tighten it.

    But I also get why some people struggle with it. If you’re shifting around a lot, leaning forward to grab something, or trying to wear it while standing and moving, yeah it’s gonna shift. It’s not magic. I found that once I stopped treating it like something I could wear while cooking dinner or whatever, it was fine. I just sit still for the 12 minutes and let it do its thing. The cordless part is nice because I can get up and grab a drink without unstrapping it, but I do have to readjust when I sit back down. That’s not a dealbreaker for me though.

    I’d say if you’re the type of person who can sit still for a few minutes, you’ll be fine. If you’re planning to wear it while doing other stuff, you’re gonna be disappointed. I think a lot of the videos you see where it’s sliding around are people who are fidgeting or moving around too much. It’s a massager, not a piece of clothing.

    in reply to: Does the Vanotium really stay odor-free after garlic or fish? #8057
    Cecily
    Member

    I got mine for the same reason, heavy fish user here. I will say the smell does fade but it takes a couple of extra minutes of rinsing compared to what the ads show. It’s not magic, but it’s way better than my old plastic board ever was.

    in reply to: Qinux HydroXeltor on windows, does it leave streaks? #7894
    Cecily
    Member

    I was pretty convinced this thing just wasn’t meant for glass when I first got mine. I tried it on the living room windows early on and got that same cloudy look you are describing. It bugged me for a bit, then I just moved on and used it for the fence and the walkway.

    But then a couple of weeks ago I had the hose out anyway and figured I would give the windows another shot. I think the difference was I stopped trying to get the glass super clean in one pass. I used a wider spray and kept the nozzle moving a lot faster than I do on the patio. That film basically disappeared. I honestly think I was just holding it in one spot too long and letting the water sit and dry weird.

    The car windows still give me a little trouble if the sun is beating down on them. I will say that. But the house windows are fine now that I changed how I move my hand. I would not call it a streak-free miracle tool or anything, but it is not as bad as I first thought. I just had to adjust what I was expecting from it.

    Cecily
    Member

    I’ve had mine for a couple months now and I do swim with it, but not laps. I’m more of a pool floater, honestly. I’ve been in the water with it maybe a dozen times, including some chlorinated pools and it’s been fine. No fogging on the inside, no sensor issues, battery still lasts the same. I do give it a quick rinse under the tap afterwards just because I figure chlorine isn’t great for anything long term. I can’t speak to the 50m thing because I’m never that deep, but for normal swimming and splashing around it does what it says. I’d say if you’re just doing regular pool sessions, you’re probably fine. I wouldn’t take it diving or anything, but that’s not what I bought it for anyway.

    in reply to: ChirpyCharm notifications when birds are around? #7148
    Cecily
    Member

    I think some delay is just part of how these things go. Mine will sometimes ping me after the bird’s already been at the feeder for a bit. I don’t really mind it, since I mostly check the recordings anyway. The live view is more of a bonus for me.

    in reply to: SleepZee fit after a few weeks, does it loosen up? #7087
    Cecily
    Member

    Mine relaxed a bit after the first month, but the real change was just getting used to the pressure. The material didn’t give a ton, I just stopped noticing it as much. It’s still snug, which I figure is kind of the point.

    in reply to: Guardality with a passport holder? #7043
    Cecily
    Member

    If the passport is staying in the RFID holder the whole time, I’d say skip the Guardality. You’re already covered for the one thing you’re worried about. The card makes more sense if you want to protect other cards in a wallet that doesn’t have built-in blocking. You’re not missing out on anything if you go without it.

    in reply to: Earscribe translation for quick back-and-forth? #6870
    Cecily
    Member

    I’d probably just slow down my own speech a bit and treat it like talking to someone who needs a second to process. That way the pause feels less awkward and more natural. It’s not perfect but it makes the whole thing less stressful.

    in reply to: Qinux Klampero for really small chains? #6015
    Cecily
    Member

    I just got one for my little electric saw and it worked fine. Didn’t have to mess around with it much.

    in reply to: Black Falcon Drone for a casual flyer, or overkill? #5787
    Cecily
    Member

    I think it’s fine for a casual flyer. The setup is basically just charge it, unfold it, and go.

    in reply to: WineCork Pro vs. old rabbit-style opener – quieter or not? #5772
    Cecily
    Member

    Guess I’ll just go for it then. The motor hum doesn’t sound like it’d be a big deal at the table compared to the pop. Thanks for the input, think I’ll pick one up.

    in reply to: Breezi AC actually do anything in a humid room? #5749
    Cecily
    Member

    I’ve used mine in a humid room and honestly, the airflow alone is enough to keep me from feeling like I’m melting. The mist is just a bonus.

    Cecily
    Member

    I’d push back on that a little. I’ve had mine hold up through maybe eight or nine washes now and it still beads water noticeably. Not as tight as day one, but definitely still there and not just marketing fluff.

    in reply to: Enence Translator for learning pronunciation? #5294
    Cecily
    Member

    I’d say if you’re just running through a few phrases before a trip, it’ll probably do the job well enough. The voice recognition isn’t perfect but it’s decent for basic practice.

    in reply to: Qinux PolarBreeze battery life question #5162
    Cecily
    Member

    I think the oscillation probably takes a bit more power, but on low speed it might not even be that noticeable. Not totally sure though, I usually just plug mine in when I remember.

    Cecily
    Member

    I’d just put it somewhere that doesn’t get as hot if you’re worried about it. No reason to stress over the adhesive when there’s plenty of other spots on a laptop.

    in reply to: Is the Melara Air supposed to feel this firm at first? #4898
    Cecily
    Member

    I remember mine feeling pretty stiff straight out of the box too. It took maybe four or five nights before it felt like it actually molded to my head. Not totally sure if it gets super soft, but it definitely relaxed a bit after the first week. Still works fine for me now.

    Cecily
    Member

    I mean, I mess around with the settings on mine more than I probably should, and I still can’t quite tell if it’s actually cooling the air or just making the room feel less stuffy. Either way, it’s quiet enough that I don’t mind having it run while I’m trying to focus.

    in reply to: Herz P1 Smart Scale handle feel weird for anyone else? #4090
    Cecily
    Member

    I just don’t pull on it aggressively and it’s been fine. Feels like one of those things where if you’re rough with it you’ll have a problem, but normal use shouldn’t be an issue.

    in reply to: Is the WellHeater supposed to be silent when it’s running? #3901
    Cecily
    Member

    Nah, it makes some noise. Not gonna pretend it’s dead quiet.

    in reply to: Does the Qinux Klampero actually keep the angle consistent? #3799
    Cecily
    Member

    I just like that it takes the guesswork out of the angle. I’m not super patient with a hand file so having that guide locked in saves me time. Works fine for my weekend trimming.

    in reply to: Qinux BlastVul battery life enough for a car wash? #3758
    Cecily
    Member

    I’ve used mine for a couple of washes and it’s never fully died on me mid-job. Usually fades near the very end but by then I’m just finishing up the rinse. Good enough for my hatchback.

Viewing 30 posts - 31 through 60 (of 89 total)