Forum Replies Created
-
AuthorPosts
-
4 de September de 2026 at 18:24 in reply to: Does Qinux AquaSylk remove the chlorine smell or just reduce it? #9574
Mark Carrell
MemberI’d say it reduces it more than removes it. In my case the smell dropped a lot once the water had been running for a minute or two. First few seconds still have that chlorine edge, but after that it’s barely noticeable. Good enough that I stopped caring about it.
Mark Carrell
MemberTextured back is fine, it holds. Size barely shows on a tablet.
29 de August de 2026 at 17:34 in reply to: Does the Qinux VultrioX fit most standard brush cutters? #8626Mark Carrell
MemberThe fitting question always gets overblown. I grabbed one for a machine that’s been sitting in my shed for years and it mounted up without any fuss. Quick swap and it was running fine. The main thing is just making sure the head locks in tight before you start it up.
28 de August de 2026 at 22:17 in reply to: Does StopWatt actually help with power surges or is that just a bonus? #8502Mark Carrell
MemberI look at it this way: if you’ve got expensive electronics, keep them on a proper surge strip anyway. StopWatt might smooth things out a bit, but I wouldn’t stake my TV on it. Mine has been in for a few weeks now and I haven’t seen any storm damage, but I also haven’t had a direct hit to really test it.
28 de August de 2026 at 03:59 in reply to: Does the CoolJet need ice to work well or is water enough? #8373Mark Carrell
MemberI’d say ice is overrated for this. I ran mine with just water for two months and it was fine for sitting at a desk. The difference with ice is noticeable but it fades fast anyway, so unless your office is actually hot it’s not worth the daily hassle.
25 de August de 2026 at 13:56 in reply to: Qinux AirdrobeX vs my old drying rack, is it actually faster? #8054Mark Carrell
MemberMine was slower than the rack on most stuff, to be honest. T-shirts and socks took about the same time, maybe a bit longer. I ended up using it mainly for things I didn’t want hanging around the bathroom, not because it was faster.
Mark Carrell
MemberI gave the adhesive hooks a shot too. The unit is light enough that it seems to work, but I wouldn’t count on it staying up long term. It’s one of those things where it’s fine until it isn’t.
Honestly, the desk placement is the smarter play. Keeps it out of the wall and gives you one less thing to worry about.
10 de August de 2026 at 16:47 in reply to: Does TopCarPlay need a strong phone signal to connect? #6901Mark Carrell
MemberCellular signal has nothing to do with the connection between your phone and the adapter. It’s purely Bluetooth and Wi-Fi between those two. I’ve used mine in underground parking garages, out in the middle of nowhere with zero bars, and it never dropped the CarPlay link because of that.
The only time you’d notice the phone signal is when you’re using something that needs data, like live traffic in maps or streaming music. Those will load slowly or just sit there spinning until you get back to better coverage. But the CarPlay connection itself? It stays up just fine.
I will say the Wi-Fi part is what matters most. If you park next to someone with a strong signal on the same band, you might get some interference, but that’s rare. My setup has been stable for the most part. I would not worry about the garage situation.
8 de August de 2026 at 20:28 in reply to: FitiBeats touch controls – do they ever get less finicky? #6783Mark Carrell
MemberThey do settle down after a bit, but not because the sensitivity changes. You just learn where not to grab them. I mostly hold mine by the very edge when I need to adjust them or take them out. If I grab the middle of the bud, it skips or pauses every time.
Took me maybe a week to break the habit of pinching them like regular earbuds. Once I got that down, it stopped being an issue. I still accidentally trigger them when I’m putting them in my ears or taking them out if I’m not paying attention, but that’s on me now, not the earbuds.
They’re not going to magically become less touchy. You just adapt your grip. If you can live with that little learning curve, it’s fine. If you know you’re someone who constantly fiddles with your earbuds, it might always bug you a little.
8 de August de 2026 at 06:31 in reply to: How long does a single NanoPolix cloth last before it stops working? #6728Mark Carrell
MemberMine faded out gradually over maybe two months of light use. The giveaway was that I had to start pressing harder and doing way more passes just to see the same result. You’ll feel it when it’s not pulling its weight anymore. I’d say replace it once you notice that.
7 de August de 2026 at 15:02 in reply to: Ryoko Pro SIM card included, but is it actually locked to their plans? #6696Mark Carrell
MemberI’d rather have the option to use my own SIM anyway, even if the included one works fine. That’s really the whole point of a travel router for me. If it locked me into one provider, I wouldn’t have bought it.
6 de August de 2026 at 12:32 in reply to: Does StopWatt need to be near the breaker box to matter? #6617Mark Carrell
MemberI wouldn’t stress too much about it. I just plugged mine into an outlet in the hallway and left it alone. It’s not like you’re going to move it around every day anyway, so just find a spot that’s out of the way and call it done.
6 de August de 2026 at 07:31 in reply to: Does the Coolizi Coolzy cycle on and off on its own or does it keep running? #6596Mark Carrell
MemberThe pause is just the unit resetting itself internally, not a problem. Mine does it too and I’ve never had an issue with the cooling. It’s one of those things you stop noticing after a week.
4 de August de 2026 at 13:52 in reply to: CarbonOne Safe placement question – does it matter how high you plug it in? #6466Mark Carrell
MemberPlacement matters less than people think with these plug-in units. I’ve had mine in a lower outlet near the baseboard for over a year and it’s caught a gas smell from the stove just fine. The counter outlet will work.
22 de July de 2026 at 12:31 in reply to: Coolizi Coolzy for a bedroom that gets afternoon sun? #5703Mark Carrell
MemberI’ve got one in a bedroom that gets cooked by afternoon sun. It works well enough for me, but I wouldn’t say it’s amazing. The remote is fine, but I mostly just set it before the heat hits.
16 de July de 2026 at 09:16 in reply to: Pro Capture battery life when using WiFi for the app? #5295Mark Carrell
MemberIt’s pretty normal with WiFi on. I noticed the same thing but honestly it’s not a deal breaker for me since I mostly use it without the app anyway. Still gets me through a solid hike.
11 de July de 2026 at 14:45 in reply to: Is the Glokore Filtered Showerhead easy to clean if buildup happens? #4993Mark Carrell
MemberNah, I’d say it’s actually less hassle than a regular one. The outside is smooth plastic so scale doesn’t really grab onto it, and the filter is sealed away inside so you don’t have to mess with it until it’s time to swap it. I think most people overcomplicate it.
11 de July de 2026 at 08:32 in reply to: ChirpyCharm solar charging question — does it actually work in partial shade? #4971Mark Carrell
MemberI’ve had mine in a spot that gets afternoon shade and it’s been okay so far. Battery hasn’t dropped to zero on me, but I do notice it takes longer to recharge if we get a few cloudy days in a row. Not a dealbreaker for me though.
8 de July de 2026 at 12:45 in reply to: Does the AiraBreeze use much electricity if I leave it on all day? #4766Mark Carrell
MemberI’ve left mine on for full 8-hour stretches a few times and didn’t notice much difference on my bill. It pulls way less power than a window unit.
Mark Carrell
MemberBoost mode kills the battery, plain and simple. I get about three weeks in Everyday mode.
Mark Carrell
MemberWarm is normal, hot isn’t. If you can hold it fine, I wouldn’t sweat it.
23 de June de 2026 at 09:50 in reply to: Hewelth ReliefChain heat mode – does it get actually warm or just kinda warm? #3688Mark Carrell
MemberI actually turn mine on and off during use. I like the warmth but sometimes I want it more subtle so I just run it for a bit then shut it off. Works fine for me that way.
Mark Carrell
MemberI barely touch mine once I set the speed I want, so the wiggle hasn’t really been an issue for me.
Mark Carrell
MemberThanks for all the replies. Sounds like it’s easy enough to swap, so I’ll just grab one and not overthink it.
20 de June de 2026 at 17:21 in reply to: Epicooler heating vs cooling, anyone else notice one is way stronger? #3495Mark Carrell
MemberThe heating definitely feels more immediate, but that’s just how heat works. I wouldn’t overthink it.
19 de June de 2026 at 05:51 in reply to: Does the Qinux Pixgo 4K need a special SD card or will any work? #3364Mark Carrell
MemberPretty much any decent class 10 card will do the job. I wouldn’t risk it with some old slow card though, just grab a new one.
Mark Carrell
MemberI just turn down the ambient sound manually in the app when I’m in a loud spot. It’s not perfect but helps enough to get by.
Mark Carrell
MemberI’d just try it and see. On darker paint it’s not gonna be magic, but for light scuffs it should knock them down enough to not catch your eye every time. Works fine for that.
-
AuthorPosts
