S4r4 Hernández

Forum Replies Created

Viewing 30 posts - 31 through 60 (of 65 total)
  • Author
    Posts
  • in reply to: WaveMax without a window, still worth trying? #8797

    I think the window thing gets overblown a little. I had mine sitting on top of a tall bookshelf in a hallway with no windows nearby and it pulled in a decent amount of local channels. Not every single one, but enough that I stopped feeling like I needed cable for the local news and sports.

    in reply to: PolorVision with rain on the windshield, any glare left? #8664

    I was in the same boat after my first rainy drive. It was more of a drizzle and I kept trying to figure out if the lenses were actually doing anything for the drops sliding down the glass or if I was just convincing myself. Then we got caught in that kind of rain where the wipers can barely keep up, the kind where everyone slows down to a crawl on the highway. That was the real test for me.

    What I noticed was that the water on the windshield still looked like water on the windshield. That part didn’t magically disappear. But the difference was everything around it. The headlights coming toward me and the taillights ahead turned into these softer, more defined shapes instead of exploding into those big blinding halos. The spray kicked up by cars in front of me was way less of a white wall of confusion and more like I could actually see through it and pick out where the car was. I stopped squinting so much, which I didn’t even realize I was doing until my face relaxed.

    So for me, the drops on the glass are still there and they’re still a bit annoying, but they stopped being the main thing I was fighting against. The glasses took care of the harsh light bouncing off everything wet, and that was what was actually wearing me down. I wouldn’t say they turn a downpour into a sunny day, but they took the edge off enough that I got home without that exhausted, headache-y feeling I usually have after driving in heavy rain.

    in reply to: AerioQ cooling mode leaving the room a bit damp? #8366

    Mine has been fine in that regard, but I also keep it on the lower fan setting most of the time. I could see the higher airflow making the room feel a bit sticky if there’s any humidity hanging around. Maybe try that before adjusting anything else.

    in reply to: CarbonOne Safe vs old detector: is the beep pattern different? #8299

    The short chirps are just the pre-alarm warning, mine does it too before the real beeping starts.

    in reply to: SpyFocus app live view vs older cam, any delay? #8253

    I’d just keep using it and see if the lag actually bothers you in practice. For me, the delay is noticeable if I stare at the screen waiting for something to happen, but if I’m just glancing over to check on my kid, it’s fine. I’d rather have that than the old camera where I felt like I was watching a replay.

    in reply to: Qinux AirdrobeX vs my old drying rack, is it actually faster? #8036

    I just like that I don’t have to watch the weather before doing laundry.

    in reply to: WineCork Pro vs. my old manual corkscrew: is the noise normal? #7632

    Mine makes a pretty noticeable whirr too, but it’s always sounded like that from day one. It’s not like a grinding noise or anything concerning, just the motor doing its thing. I’ve opened maybe a dozen bottles with mine so far and it hasn’t gotten louder, so I’d say it’s just how this model sounds.

    in reply to: Does the DrFlexa feel bulky under regular pants? #6838

    I’m gonna be the odd one out here. I found mine bulky enough that I stopped wearing it under anything but sweatpants. The side stabilizers pressed into my leg and created this weird outline that was super visible through denim. Maybe it’s a sizing thing, but for me it was not the “disappears under clothes” experience everyone else seems to have.

    I’d personally keep it indoors and use traps in the garage.

    Honestly, I think you’re way overthinking this. I get why it feels like it should matter, but for a plug-in unit like this, the height really isn’t something to lose sleep over. Counter outlet is totally fine, and honestly probably better since you can actually see the screen and check the numbers without crouching.

    in reply to: AerioQ timer clicks when it turns off? #6271

    I keep seeing people say theirs clicks and honestly I’m not convinced that’s just how it’s supposed to be. Mine doesn’t make any noise when the timer cuts it off, and I’ve had it running for a few months now. Maybe it’s a batch thing or something with how it’s mounted, but I wouldn’t just assume it’s normal without checking.

    I think that’s probably just the internal parts doing their thing when it powers down. I wouldn’t overthink it unless it gets noticeably louder or starts happening randomly while it’s running.

    in reply to: Breezi AC worth it for a small office cubicle? #6081

    Honestly, I think people overthink these things. If your cubicle is small and you can put it right next to you, it’s fine for taking the edge off the stale air. It’s not gonna turn your corner into a walk-in freezer, but it’s also not some useless gimmick.

    I think that’s pretty normal honestly. I do the full heat session most days too and mine needs a charge around the same time. I wouldn’t worry about it unless it starts dying way faster out of nowhere.

    in reply to: AiraBreeze on a timer or just leave it running? #5026

    I just fill mine up in the morning and let it run while I’m at my desk. It’s quiet enough that I don’t even notice it, and it shuts off on its own whenever the tank runs dry later in the day.

    I think if you’re just doing a quick pass between real cleanings it does a decent job. I usually hit the seats with the brush attachment first to loosen stuff up and then go over it again, that seems to help a bit. Not totally sure it gets everything, but for a little handheld it’s fine for how often I use it.

    in reply to: How often do you actually take your dog for a haircut? #4482

    I usually just watch for when his fur starts getting in his way, like when he’s eating and it drags through his food bowl. That’s my sign. Ends up being around 7 or 8 weeks for us but I’m not strict about it.

    in reply to: Quick thing about the ODIN SafeWave EMF and phone cases #4320

    I haven’t tried mine under a thick case specifically, but I feel like it should be fine since it’s just a sticker doing its thing. I’d probably put it under just to keep it from peeling off or getting scratched, but I get why you’d wonder about signal or whatever.

    in reply to: Qinux Vapoxis owners: how long did yours last? #4139

    I’ve seen a few people mention that leak issue online but honestly haven’t run into it myself yet. Got mine a couple months back and it’s still steaming like day one for quick bathroom touch-ups and windows. Kinda wonder if it depends on the batch or something.

    in reply to: Qinux Vibrathea pads stick well enough for neck use? #4123

    I mean, realistically, unless you’re planning to do cartwheels while using it, I wouldn’t overthink the pad thing. Mine have been fine just sitting at my desk or lounging around.

    in reply to: Is the Qinux BreezaMax quiet enough for a bedroom at night? #3706

    Honestly I’m probably just going to try it out in my own room and see if it bugs me. I figure if it’s too loud I can always move it to my desk during the day.

    in reply to: Does the GrillWizz actually handle burnt-on grease? #3332

    Huh, I haven’t had that issue with mine yet but I honestly only use it for regular cleanups after cooking, not the deep baked-on stuff. I think if you let it sit for a while before trying, it might not matter which speed you use.

    Honestly, it’s not that deep. Just use a decent class 10 card and you’ll be fine. I’ve used a few different ones with mine and never had a problem.

    in reply to: SawShark worth it for a beginner or just another gadget? #3233

    I think it probably depends on how much you hate trying to get the angle right freehand. I grabbed one mostly because I got tired of squinting at my chain and guessing, and it did make that part way less annoying for me. Not sure if it’s a must have or anything, but it definitely didn’t feel like a waste of money either.

    in reply to: Does the Qinux Gravizer actually work on glass? #3214

    I’d be more worried about pressing too hard than the tool itself. I tried it on a random glass bottle and it worked fine, just keep the movement loose and steady.

    in reply to: Does the iTagPro work without being right next to your phone? #2925

    Oh, I actually wondered the same thing before I got mine. I think it’s just Bluetooth so you won’t get a live spot if it’s far, but the last known location pops up in the app which is handy enough.

    Huh, I actually never thought about that. I just assumed you’d use it on the floor since it’s supposed to stretch you out. But I guess if the mattress is soft enough it would just sink in and you wouldn’t get the same pull.

    in reply to: Enence Translator vs old phrasebook apps for offline use? #2509

    Honestly, I think people overthink the offline thing a bit. My old phrasebook app was good for the basics, but it got annoying having to scroll through categories mid-conversation when someone was waiting for me to find the right phrase. The Enence is way quicker for that kind of back and forth, even if the offline mode is limited.

    in reply to: Jetterix for cleaning a wooden deck – safe or not? #2389

    I dunno, I think people get way too nervous about this stuff. It’s just a garden hose nozzle, not a sandblaster. I’d just try it on a wider spray pattern first and not hold it right against the wood, seems pretty straightforward.

    Huh, I haven’t really noticed that on mine. Maybe it depends on the phone or how long your drive is? I mostly do short trips and it seems fine.

Viewing 30 posts - 31 through 60 (of 65 total)