Pixel Pete

Forum Replies Created

Viewing 29 posts - 31 through 59 (of 59 total)
  • Author
    Posts
  • in reply to: Qinux Pixgo 4K waterproof case question #11078
    Pixel Pete
    Member

    I bought mine thinking the case was always included and it wasn’t. Had to order one separately, which was annoying since the whole point was snorkeling. So no, it’s not guaranteed.

    in reply to: SawShark vs old file guide, anyone compared? #11002
    Pixel Pete
    Member

    I’ve used both and the SawShark does hold the angle a bit better for me, especially on the second and third sharpen. Whether that’s worth it depends on how much you sharpen. For occasional touch ups I still grab the old guide since it’s already sitting there.

    in reply to: Does the Enence Translator need Wi-Fi for every language? #10746
    Pixel Pete
    Member

    I picked one up before a trip to Japan and honestly the offline thing was way less of an issue than I expected. In the cities my phone had signal basically everywhere so it stayed in online mode the whole time. The only stretch where I actually relied on offline was a couple days out in the countryside, and for basic stuff like asking directions or ordering food it handled Japanese fine. I didn’t try to run through all 68 languages or anything, but the ones I actually needed worked when I had no bars. That was the part I cared about. So for me it did what I wanted. If you’re planning to spend most of your time somewhere really remote you might want to check the specific language first, but for normal travel it was fine.

    in reply to: ODIN SafeWave EMF on earbud case, does it fit okay? #10513
    Pixel Pete
    Member

    Probably ends up on the lid or not at all.

    in reply to: Qinux Vibrathea how long do you usually leave the pads on one spot? #9886
    Pixel Pete
    Member

    I do the same thing honestly. Ten minutes feels like forever once the tingling gets intense. I just shift them when it gets uncomfortable and call it a session, probably ends up being 15 minutes total anyway. Doesn’t seem like there’s a right or wrong way as long as it feels okay.

    in reply to: Does the MozzDefense light barrier actually work on all mosquitoes? #9873
    Pixel Pete
    Member

    I just use mine as a lantern honestly. The bug thing is a bonus if I happen to stay close to it, but I wouldnt buy it as a primary repellent. I think people get too hung up on that feature when the light itself is pretty solid for the price.

    in reply to: Does the WellHeater need to be plugged directly into the wall? #9840
    Pixel Pete
    Member

    I’d say wall outlet is the safer bet if you can manage it. These little heaters draw a decent amount of power and the cord on mine is pretty short anyway, so a power strip would have meant some awkward positioning. I get the outlet situation being annoying though. In my place the only spot that made sense was near a surge protector and I just moved a lamp to free up the wall socket instead. Took two minutes and saved me from wondering if something was gonna overheat at 2am.

    in reply to: Does the ClairLite need a dark room to work? #9798
    Pixel Pete
    Member

    I think the dark room thing is more about being able to see where the light hits so you know what’s covered. Sunlight isn’t going to stop the UV bulb from doing its job, it just makes it harder to notice if something is blocking the light. I usually shut the curtains for that reason, not because the daylight actually messes with anything.

    in reply to: DashOne Pro screen too bright at night? any way to dim it? #9468
    Pixel Pete
    Member

    Funny how they nailed the recording but missed that one simple thing.

    Pixel Pete
    Member

    I’d say grab a card just in case, since the box usually only lists the camera and mounts.

    Pixel Pete
    Member

    I think the calm place thing is doing more of the heavy lifting than people want to admit, but that doesn’t mean the mat is useless either. For me, having one under my desk changed my posture more than my stress. I stopped crossing my legs or perching on the edge of my chair because the mat gave my feet a reason to stay flat on the floor. That alone made my back feel better by the end of the day, which probably helped me feel less tense overall.

    I never noticed any big mental shift while using it. No sudden wave of calm or better focus. What I did notice was that I was more aware of where my body was and how I was sitting. That little bit of mindfulness during a workday can add up.

    The grounding part might be doing something, I won’t rule it out, but I think it’s too subtle to notice in a few weeks. Stress is usually built up over months or years, so expecting a mat to undo that in a month seems optimistic. Even if it works, it probably works slowly enough that you can’t point to the exact day it kicked in.

    I still use mine mostly because it feels nice and keeps my feet from getting cold on the floor. If the relaxation comes along with it, great. If not, I didn’t lose much.

    Pixel Pete
    Member

    Honestly, I was the opposite of most people here. I didn’t find mine overly firm at the start. It was more like it just felt… there. Like I was aware of the pillow the whole night, if that makes sense. Not uncomfortable, just not invisible like a pillow should be after a while.

    I kept second-guessing the shape of it. The butterfly cutouts and everything looked cool in the pictures, but in the dark it just felt like a weird lumpy thing under my head. I almost returned it because I kept waking up and noticing it, which is weird because I usually fall asleep anywhere.

    But it did settle in. Not in the sense that it softened up dramatically, but more that I got used to how it cradles my head. I stopped thinking about it around maybe the third week. It went from “what is this thing” to just being my pillow.

    So yeah, there is an adjustment period, but I don’t think it’s about the foam breaking in. It’s about your neck and brain getting used to the shape. You have to give it a minute before your body stops fighting it.

    in reply to: Does the Qinux VultrioX fit most standard brush cutters? #8580
    Pixel Pete
    Member

    I had the same worry before buying mine. The mounting plate is pretty standard, so it went on my older Tanaka without any hassle. I’d say if your cutter uses the common bolt-on style head, you’re probably fine. Maybe just check the shaft size before you order.

    in reply to: Does GrillWizz handle the grates while they’re still warm? #8510
    Pixel Pete
    Member

    I would not run it on grates that are still really hot. I tried it once right after cooking and the heat just felt off, plus it made the whole thing harder to hold after a bit. Warm is fine, but I would let it sit a few minutes first.

    Pixel Pete
    Member

    I wouldnt trust it as my only protection. I took mine on a trip near a lake and the bugs were still all over me even though the light was on. It seemed to keep them from hovering right around the lamp itself, but anything more than a few feet away didnt care. Bring the spray.

    in reply to: Does the Breezi AC need ice to be worth it on a hot day? #7777
    Pixel Pete
    Member

    I don’t get the ice thing at all. If the fan is hitting you directly it’s already doing what it needs to do, and ice just adds extra work for maybe ten minutes of slightly colder air. I’d rather just keep a bottle of cold water nearby and skip the freezer routine.

    in reply to: Does the Black Falcon Drone need a phone for the camera to work? #7700
    Pixel Pete
    Member

    The phone is basically the display for this thing, so I wouldnt skip it. Without it, you’re just pointing the camera somewhere and hoping it looks right. I fly with mine connected every time just because it feels pointless otherwise.

    in reply to: Qinux PolarBreeze wall mount actually holds? #7188
    Pixel Pete
    Member

    I had mine stuck up on a painted wall for a few weeks and the adhesive gave out eventually. It didn’t crash hard or anything, just slid down slowly during the night. I think it depends a lot on the paint quality and if the wall gets any warmth from the sun.

    Pixel Pete
    Member

    The range thing is the part people miss. The alert only triggers once the tag drops off Bluetooth, so if you park right next to your bag it can take a while before you get pinged. I found that out the hard way in a coffee shop when I left my backpack on a table like two meters away. It works, just don’t expect it to be instant.

    in reply to: Does the Hewelth UVClean need to be charged before first use? #6981
    Pixel Pete
    Member

    Mine had a little charge when I opened it, just enough to run one cycle. I still plugged it in while I was cleaning the bottle and getting it ready, so by the time I actually wanted to use it, it was topped off. Probably not a bad habit to get into anyway.

    in reply to: Does the Matsato need a lot of oiling for the handle? #6784
    Pixel Pete
    Member

    I think the whole oiling thing gets blown out of proportion. I got mine a while back and the handle still looks fine, I just wipe it down after washing and let it air dry. The wood has darkened a bit where I grip it but that’s about it. If it ever starts looking really dry, I might bother with oil, but until then it’s not something I think about.

    in reply to: Does the Vital Shoulder Massager stay put on its own? #6331
    Pixel Pete
    Member

    I had the same worry before I got mine, mostly because I hate having to hold things while I’m trying to work. The strap does its job for desk use, but I found that the weight of the unit itself is what really keeps it anchored. Once it’s snugged up, it kind of settles into place and doesn’t wander much.

    The only time I noticed it shifting was when I reached across my desk for something on the other side. That little bit of lean-forward movement made it slide a touch, but it wasn’t sliding off or anything dramatic. Just needed a quick nudge back into position.

    If you’re planning to sit relatively upright and type or read, I think you’ll be fine. It’s not going to stay perfect if you’re constantly twisting around, but for normal desk stuff it does what it needs to do.

    in reply to: WineCork Pro vs. old rabbit-style opener – quieter or not? #5726
    Pixel Pete
    Member

    I haven’t tried the WineCork Pro myself, but I’ve sat next to someone using one at a dinner party and it was more of a quiet whir than a loud pop. The motor noise was there but it didn’t stop conversation or anything.

    in reply to: BareEarth Grounding Mat leaving a faint mark on my floor? #5610
    Pixel Pete
    Member

    Yeah, I had the same thing happen with mine on a laminate floor. It wasn’t anything major, just a faint outline like you’re describing. I just left it and it faded a bit over time.

    Pixel Pete
    Member

    I get what you’re saying, the heat is pretty subtle. I think it’s more of a gentle warmth to relax the muscles a bit while the traction does the main work. Not gonna replace a heating pad or anything, but it’s fine for what it is.

    in reply to: Is a mini AC enough for a small bedroom? #5256
    Pixel Pete
    Member

    From what I’ve seen, the main thing is just making sure the exhaust hose has a good path out the window. If that’s set up right, it should take the edge off a 10×10 room for sure.

    Pixel Pete
    Member

    I just use mine with a couple ice cubes tossed into the water tank and it feels noticeably cooler for the first hour or so. The dedicated ice chamber seems like extra hassle for maybe a small difference, so I just skip it.

    in reply to: Dustaclean nozzle for keyboard use – does it actually fit? #4915
    Pixel Pete
    Member

    I dunno, I think it fits fine between my keycaps. The brush is a bit stiff but it works.

    in reply to: CoolCove on a shelf vs wall mount, any difference? #4442
    Pixel Pete
    Member

    Appreciate everyone chiming in. Sounds like the wall mount might give a slightly cleaner airflow if you’re particular about it, but for a normal room on a shelf it’s probably not a night-and-day difference. I’ll probably just leave mine where it is and not overthink it. Thanks for the input, thread answered my curiosity.

Viewing 29 posts - 31 through 59 (of 59 total)