Forum Replies Created
-
AuthorPosts
-
9 de November de 2026 at 05:11 in reply to: Does the MozzDefense repellent work when the light is off? #18333
Pixel Pete
MemberNot sure the repellent actually depends on the lamp being on. From what I understand the mosquito side is a separate function you can run on its own, so you shouldn’t need to light up your whole tent just to get the barrier thing going. Whether it actually keeps the bugs off is another story, but running it in the dark shouldn’t be an issue. I’d just try it one night with the light off and see if you still get bitten.
Pixel Pete
MemberLive tracking all day is a big ask for any of these collars.
1 de November de 2026 at 23:04 in reply to: Qinux HydroXeltor – does it fit standard garden hose threads? #18027Pixel Pete
MemberMine went on my tap without any adapter and it’s been handy for rinsing the patio chairs. The connector felt a little loose at first but it’s held up fine over a few weekends.
30 de October de 2026 at 05:05 in reply to: How do you adjust wellness device guidance for night shifts? #17725Pixel Pete
MemberShifting the prompts to match your actual routine makes more sense than ignoring them, in my experience. I tried the whole mental relabeling thing for a couple weeks and kept forgetting which check-in was which. Setting a custom sleep window took five minutes and now the reminders actually land when I’m awake enough to care. Slightly embarrassing how long I put that off.
25 de October de 2026 at 16:51 in reply to: Black Falcon Drone: how do you frame shots without a gimbal? #17354Pixel Pete
MemberThat bit about shorter turns feeling worse makes sense, the jumpiness has less time to get smoothed out over a long sweep. If your park turns are clean in the first second or two and then go rough, that tells you it’s the sustained turn, not the stick input. Worth checking on the open circle whether it holds together for the first few seconds too, that’d narrow it down.
24 de October de 2026 at 21:19 in reply to: Black Falcon Drone: how do you frame shots without a gimbal? #17314Pixel Pete
MemberMine handles slow yaw fine as long as I keep it under maybe half stick, anything past that and it looks like a slideshow. You’re probably just turning too fast for what the camera can keep up with. Have you tried a really slow full turn in open sky to see where it starts breaking up?
23 de October de 2026 at 08:30 in reply to: Does Back Restore help if you just have general stiffness? #17256Pixel Pete
MemberIf the combo beating a heating pad is the actual question, then the heat and vibration are what you’d be comparing, and that part is a pretty small upgrade over a pad on its own. The traction is where most of the price sits, so it’s a spendy way to find out.
22 de October de 2026 at 22:12 in reply to: Does Back Restore help if you just have general stiffness? #17217Pixel Pete
MemberMild stiffness after a desk day is kind of the gray zone for these things. Heat and vibration alone are plenty for me on those nights, so if the price mainly buys you the traction part, that’s the bit I’d think twice about. What’s making you lean toward this over a plain heating pad?
22 de October de 2026 at 21:38 in reply to: Qinux Pixgo 4K for snorkeling, is the case really sealed? #17215Pixel Pete
MemberMine leaked on the second swim, so the case seal isn’t as solid as it looks.
20 de October de 2026 at 08:42 in reply to: Do universal remotes actually work with old DVD players and VCRs? #16775Pixel Pete
MemberMine picked up the DVD player after a couple of code tries, but the remote itself was so clunky I went back to the original anyway. Half the buttons did nothing useful and I kept fat-fingering the wrong input. If the goal is fewer remotes it works, it just might not feel like an upgrade.
Pixel Pete
MemberMine had the same issue when I first hung it up, and I ended up just nudging the camera housing itself a touch before tightening things back down. Didn’t take the whole thing apart, just a gentle push while it was still on the bracket. It’s stayed put since then and the view sits lower now, so the feeder tray isn’t cut off at the bottom of the frame. I’ve had it up for a couple of months and it hasn’t drifted back up or anything. If yours feels really stiff, maybe it just needs a bit more of a nudge than you’d expect. The housing on mine was tighter than I thought at first. Either way, it’s a quick thing to try before going near the mount again.
19 de October de 2026 at 03:09 in reply to: How do you split one outlet in a hostel without being a jerk? #16569Pixel Pete
MemberJust ask the nearest person, it’s less awkward than hovering.
Pixel Pete
MemberI’d say the glove box claim is plausible but depends a lot on your car. My glove box is already stuffed with the manual, insurance papers, and a couple of random cables, so something like this would probably fit but not leave much breathing room. I haven’t used a Dustaclean myself, but from what I’ve seen of similar handheld vacs, the body is usually small enough to stash somewhere. The awkward part tends to be the attachments and charging cable, since those don’t always pack as neatly as the unit itself. If you’re mainly dealing with crumbs in the cup holders and seats, keeping it in the car sounds convenient, but you might end up using a door pocket or center console instead of the glove box. I’d just check the return policy in case it’s bulkier in person than it looks online.
18 de October de 2026 at 08:53 in reply to: Do I really need to upgrade my current setup for camping with pet tech? #16445Pixel Pete
MemberI lean toward keeping stuff simple since I’m the type who ends up with three chargers and none of them in the right bag. My old power bank lives in my camping bin permanently, so it’s one less thing to think about. If your current one’s already living in your pack, that’s kind of the dream setup.
12 de October de 2026 at 08:23 in reply to: How do you keep a big bag of pet food from going stale? #15480Pixel Pete
MemberTossing the whole bag in a plastic bin actually made mine go stale faster, the kibble picked up that weird plastic smell after a couple weeks. I just roll the top down tight and use a chip clip now, way less fuss and the cat has not complained. So I would skip the container thing unless you really hate the bag look.
Pixel Pete
MemberRan fine on my old phone, just needed wifi.
Pixel Pete
MemberMine has always cut out when it tips, but I only know that because I knocked it over twice in the same week. No idea what the trigger actually is, it just goes quiet. That’s enough for me.
8 de October de 2026 at 11:38 in reply to: Does the Vital Shoulder Massager work on both shoulders at once? #14887Pixel Pete
MemberMine only really sits right on one shoulder at a time, so I just do one side then the other after work. Takes an extra minute but it’s not a big deal. If both are bugging you, that routine still gets the job done.
4 de October de 2026 at 15:10 in reply to: NuraFix and UV protection: does it actually do anything? #14289Pixel Pete
MemberUV protection is honestly the last thing I’d buy it for, but I did notice something weird on my white bumper. Had a decent layer of NuraFix on it for about a month of daily parking outside and when I finally washed it, the paint under where the coating still beaded up looked slightly brighter than the rest. Could be coincidence or just dirt, no clue. So maybe the UV thing isn’t total nonsense, but I still wouldn’t reapply just for that.
Pixel Pete
MemberI think the app does most of the heavy lifting for translation but you can still use them as normal earbuds without it. I messed around with mine on a trip last month and the translation part only kicked in once I had the app open and the right mode selected. Before that they just acted like regular Bluetooth buds. The manual is not super clear about that part, it kind of buries it in the middle somewhere. If translation is what you actually care about, just install the app and poke around the translate section, it made more sense to me once I saw the buttons in front of me instead of reading about them. The pairing itself was easy though.
26 de September de 2026 at 05:32 in reply to: Does the Hewelth ReliefChain need to be charged before first use? #12973Pixel Pete
MemberI’d still plug it in for a bit before the first session. Mine had a partial charge, but it dropped quicker than I expected once I started using the heat mode. Not a big deal, just easier to top it off first.
Pixel Pete
MemberI don’t think it’s a setting you’re missing, mine does the same thing. The zoom is fine for grabbing a general idea of what’s ahead, but expecting a readable plate at 4x is asking a lot from this thing. I mostly just leave it at 1x and crop the footage later if I need a closer look.
24 de September de 2026 at 01:23 in reply to: Aptofit: can I turn off the constant heart rate light? #12621Pixel Pete
MemberMine does the same thing and I just kind of accepted it after a while. I had a cheap fitness band before this one that only lit up when you actually opened the heart rate screen, so going to the Aptofit where it’s just always blinking was a bit of a surprise. I looked through the settings a couple times too and didn’t find anything that really kills it completely. The green light itself doesn’t bug me much during the day, it’s more at night when I’m trying to sleep and my wrist looks like a tiny alien is under it. Battery wise I still get close to a week so it’s not draining things as badly as I expected. Not saying it’s fine, just that I stopped noticing it eventually.
23 de September de 2026 at 06:05 in reply to: Does the JetClean need a specific type of water source? #12488Pixel Pete
MemberI don’t think a bucket is the best long term option. I ran mine off a bucket for a couple of weekends and the pump started sounding rough, switched back to a hose and it went away. Could have been my setup but I’d keep it in mind.
22 de September de 2026 at 15:16 in reply to: SavingStars powder clumps up in the bag, is that normal? #12397Pixel Pete
MemberMine never clumped and it lives right by the tub.
19 de September de 2026 at 21:12 in reply to: FitiBeats case battery – does it actually last as long as they claim? #11960Pixel Pete
MemberI don’t track it that closely, but mine usually die somewhere around the 6-7 hour mark per charge, and I’ve never actually added up the case recharges. 50 hours feels like a best case scenario kind of number.
17 de September de 2026 at 19:13 in reply to: Does PestVault actually last 4 weeks in a garage? #11614Pixel Pete
MemberMine went strong for five weeks near the back door.
17 de September de 2026 at 15:18 in reply to: Does the WellHeater get as warm as those old oil-filled ones? #11585Pixel Pete
MemberCeramic heaters do feel different because the heat comes off the element directly with the fan pushing it out, so what you’re getting is basically warmed air moving through the room rather than a big hot mass sitting there radiating. The oil ones store all that heat in the metal and release it slow, which is why they feel heavier and more even. I’ve noticed the same thing with these smaller heaters, they’re great for feeling warm quickly but the room itself doesn’t hold that baked feeling the same way. It’s not really a defect, just how the two designs work. If the room is small and closed up, the ceramic one will eventually get the air temp up and it feels more normal, but in an open space it’s more like you’re sitting in a warm draft than a warm room. That’s just the tradeoff for how fast it starts.
Pixel Pete
MemberTyping is the exact reason I stopped using mine at work. My hands were fine but I kept catching the edge on the desk whenever I reached for anything.
15 de September de 2026 at 02:39 in reply to: Does the DashOne Pro suction mount leave marks on the windshield? #11168Pixel Pete
MemberMine sat through two summers and still left nothing behind. I just wiped it with a damp cloth and it was gone. Sounds more like the glass had something on it already.
-
AuthorPosts
