Chris Miller

Forum Replies Created

Viewing 30 posts - 31 through 60 (of 75 total)
  • Author
    Posts
  • Chris MillerChris Miller
    Member

    I’ve had mine sitting beside my monitor for about a month now and I haven’t really had the paper problem. But I’ll be honest, my desk is usually pretty clean, so there’s just not much loose stuff for it to grab. The one time I did notice it moving something was when I had a napkin sitting right next to the base, and that was on the higher setting.

    I think my preference is just to keep it angled slightly away from me and toward the wall, which sounds weird but it kind of pushes air around the room instead of straight at my desk. I don’t run it on max either, usually the middle setting is plenty for my space. If you’ve got a fan of loose receipts or whatever sitting around though, I could see it being annoying. Maybe just clear a little zone around it if it bugs you.

    in reply to: NanoPolix actually safe on clear coat or just marketing? #10113
    Chris MillerChris Miller
    Member

    I think the whole “cloth with compound” thing is exactly why it’s probably fine. You’re not machine polishing or doing anything aggressive, just working a mild abrasive by hand. The amount of clear coat you’re moving is so tiny that it would take years of regular use to make a noticeable difference. I’d be more worried about not cleaning the surface first and grinding dirt into the paint.

    in reply to: Qinux BittOne game list question before I get one #9678
    Chris MillerChris Miller
    Member

    I think it really depends on what you mean by “easily.” The file structure thing is true, but the built-in game list is actually pretty solid for the price. I would just check what emulators it actually runs before buying, since some of these devices are pickier about certain systems than others.

    Chris MillerChris Miller
    Member

    I actually think it’s better that they don’t include one. The cards that get bundled with cameras like this are usually tiny and slow anyway. You’d end up replacing it before you even leave the house, so it’s not really saving you anything.

    Chris MillerChris Miller
    Member

    I’ve used mine on our patio doors a handful of times and I don’t get the messy complaints. The spray stays pretty tight if you don’t hold it too far back. I’ve had way more splatter from a regular hose nozzle than from this thing.

    in reply to: Qinux PolarBreeze vs old tower fan, anyone compared? #8956
    Chris MillerChris Miller
    Member

    If it’s mainly for sitting near your desk or beside the bed, I’d say go for it. But if you’re expecting it to cool down a whole room the way a tower fan does, you’re probably going to be let down. I had mine for about a month before I moved it to just personal use near my couch. It’s fine for that, but I wouldn’t want it as my only fan.

    in reply to: Glacier Breeze placement on a desk, does it matter? #8901
    Chris MillerChris Miller
    Member

    Yeah, placement makes a bigger difference than you’d think. I had mine on the corner of my desk for a while and barely noticed it, then slid it closer to my monitor, kind of in front of my keyboard, and it was a whole different thing. The cooling effect really does drop off fast once you’re more than a couple feet away.

    Also, I found out pretty quick that it’s not just distance. The angle matters too. If it’s pointed straight at your chest it feels like nothing, but tilted up toward your face a bit and suddenly it’s actually doing something. I think it’s because the air needs to hit your skin directly to feel cool, otherwise it just mixes with the room air and disappears.

    I ended up keeping mine pretty close, basically within arm’s reach, and that’s been the sweet spot for me.

    Chris MillerChris Miller
    Member

    I pretty much set a reminder on my phone for every 3 months and just swap it then. I don’t trust myself to notice when the water feels different, by that point it’s probably been past due for a while anyway. The cartridges aren’t that expensive so I’d rather just change it on a schedule and not think about it.

    in reply to: Matsato balance when cutting? #8526
    Chris MillerChris Miller
    Member

    I think a lot of it comes down to where your hand naturally sits. I noticed the same thing at first, but once I stopped gripping it so tight and let my fingers rest a bit further up, it felt way more neutral. Took me a couple of days to find that spot.

    in reply to: Does the CoolJet need ice to work well or is water enough? #8370
    Chris MillerChris Miller
    Member

    I really don’t think ice is worth the hassle unless you’re sitting right next to it in a hot room. With just water it’s basically a slightly cooler fan, which is fine for a desk. I stopped bothering with ice after the first couple days and haven’t missed it.

    in reply to: Does the Qinux Dogitek actually work for pulling on leash? #8252
    Chris MillerChris Miller
    Member

    Good to see the thread still going. I never ended up grabbing one, mostly because my lab is stubborn enough that I figured I’d end up relying on the shock more than I’d like. Sounds like the vibration is useful but not a magic fix, which is kind of what I expected. Appreciate everyone sharing their experiences, it helped me decide to just stick with training and a front clip harness for now.

    in reply to: Does the Vanotium really stay odor-free after garlic or fish? #8052
    Chris MillerChris Miller
    Member

    I think a lot of it comes down to how fast you wash it. I’m not saying that to defend the board, but I’ve noticed that if I get lazy and let something sit for a bit, that’s when I catch a smell. If I rinse it right after I’m done cutting, I don’t notice anything. That said, I’m not expecting it to be magic. I got it mainly because I was tired of my old plastic board staining, and that part has been fine. The smell thing I just factor into my routine. I don’t know, maybe I’m just used to being a little careful with it. I’d probably be more annoyed if I was the type to leave stuff on the counter while I cook other things.

    in reply to: Heater Pro X vs. my old plug-in radiator, any real difference? #8028
    Chris MillerChris Miller
    Member

    I’d keep the radiator if it still works and just deal with moving it. The ceramic ones are fine for pointing at yourself while you sit, but I wouldn’t call it a straight upgrade. If portability is the only reason, you might end up missing that heavy warmth.

    in reply to: Does the Qinux BlastVul work fine with a bucket? #7919
    Chris MillerChris Miller
    Member

    I’ve used mine with a bucket a bunch of times and it gets the job done. Pressure drops a bit compared to a hose, but for a quick car rinse or cleaning patio furniture it’s fine. You just gotta keep an eye on the water level so it doesn’t suck air.

    in reply to: AlarmTag vs old keychain alarm – is the pin easier to pull? #7803
    Chris MillerChris Miller
    Member

    The pull pin on the AlarmTag is definitely smoother than the old keychain ones I remember. I’ve had mine clipped to my bag for a few months now and tested it a couple times just to get a feel for it. It comes out clean without that awkward tugging you had to do on the older models.

    in reply to: Wood Ranger Power Leaf Blower comfortable to hold for a while? #7757
    Chris MillerChris Miller
    Member

    I use mine more than I expected for the garage and it’s fine for a good while. I do find myself switching hands after a bit, but that’s more me than the blower. For a patio and driveway, I wouldn’t worry about it being a problem.

    in reply to: Does the Black Falcon Drone need a phone for the camera to work? #7732
    Chris MillerChris Miller
    Member

    Good to know, appreciate all the input.

    in reply to: Dustaclean on car cup holders, or is that pushing it? #7149
    Chris MillerChris Miller
    Member

    Mine actually struggled with the deeper cup holders in my car, it just couldn’t get the stuff at the very bottom.

    in reply to: Can SpyFocus record continuously without overheating? #6423
    Chris MillerChris Miller
    Member

    I’ve run mine for a couple hours at a time and it just gets a little warm, nothing crazy. It never shut down on me or anything. I think unless you’re in a super hot room it’s not really something to stress about.

    Chris MillerChris Miller
    Member

    I think if you’re the type of person who actually opens the app once in a while, the trend stuff is fine. It’s mostly the daily numbers that get noisy and easy to ignore.

    in reply to: Qinux AquaSylk filter replacement cost? #5999
    Chris MillerChris Miller
    Member

    I think some people overthink the filter thing. For what it does, the price seems pretty reasonable to me. I just swap mine whenever I notice the water isn’t as soft feeling anymore, and it’s been fine. Doesn’t feel like a money pit.

    in reply to: WineCork Pro worth it for casual use? #5555
    Chris MillerChris Miller
    Member

    I haven’t had any trouble with synthetic corks myself, but I can see how it might be hit or miss depending on the brand. I’d say just keep using it, if it jams you’ll know soon enough.

    in reply to: Tagsley in a passport holder, still works? #5352
    Chris MillerChris Miller
    Member

    I’ve got mine in a passport holder too and it’s been totally fine so far. The signal still pings when I check it, even through the leather. I wouldn’t overthink it, honestly.

    in reply to: Is the Melara Air supposed to feel this firm at first? #5029
    Chris MillerChris Miller
    Member

    I kind of noticed the same thing, but honestly I wasn’t sure if it was just me. It still feels a bit stiffer than what I’d call soft, but maybe it’s just how the shape is supposed to work.

    in reply to: Jetterix for cleaning patio slabs – enough pressure? #4928
    Chris MillerChris Miller
    Member

    I think it’ll probably be fine for normal patio cleaning. People make a bigger deal out of it than it is.

    Chris MillerChris Miller
    Member

    I’d be a little cautious with that. Heat and adhesive don’t usually mix well over time, so I wouldn’t be surprised if it starts peeling eventually. I’d probably skip putting one near a hot exhaust area.

    in reply to: Hewelth UVClean cap seal getting loose over time? #4701
    Chris MillerChris Miller
    Member

    Huh, I haven’t noticed that on mine. I’ve had it for a while now and the seal still feels tight enough. Probably not something I’d stress over unless it actually starts leaking.

    Chris MillerChris Miller
    Member

    I think people expect too much if they think one little plug-in is going to clear the whole yard of mosquitoes. It probably helps a bit in a small room, but I wouldn’t count on it for outdoor use or anything.

    in reply to: WaveMax mounting position question #4486
    Chris MillerChris Miller
    Member

    I think a lot of it depends on your house and where the towers are. I tried mine in a few different spots and it honestly worked the same most of the time. Probably not worth stressing over unless you’re in a really tricky area.

    Chris MillerChris Miller
    Member

    I think it works well enough for what it is. I see the red light pop up sometimes when I’m in a hurry, and it does make me ease up a bit. Not a game changer but it’s there when I need it.

Viewing 30 posts - 31 through 60 (of 75 total)