Forum Replies Created
-
Posts
-
For me it depends way more on traffic than people think. I had mine pointed at a spot that barely moved for two days straight and it still had charge left. Then I moved it somewhere with more activity and it needed a top up the next evening. So your answer is probably gonna be tied to how much your camera actually sees, not just the mode.
The draft near the window will win every time if you plug it in there. That cold air is constantly moving past the unit, so the heat gets pulled away before you really feel it. I had a similar setup in a garage workspace with a gap under the door. I ran the heater on a shelf a few feet away, not directly in the cold path, and it made a much bigger difference for my legs and torso.
One thing that caught me off guard is how much better it works when you let it run for a while instead of turning it on and off. It needs a few minutes to get the air moving in the room. If you keep moving it around or shut it off every time you leave the desk, it never gets a chance to settle in. Point it at you from a couple feet away and give it time.
I’ve had one running near our cat’s corner for a few months now. The dog is the one who’s more curious about things, but she only ever gives it a quick sniff when it’s off. I wouldn’t lose sleep over it, but if your dog is the type to stare at lights or paw at things, just keep an eye on her the first day. They usually figure out it’s not a toy pretty fast.
I wouldnt bother keeping just one pair active. Ive had three saved on mine for a while now and switching between them is instant. The app never stumbles on which language Im using when I start a conversation, so accuracy stays the same. Whatever lag you think exists is probably just the Bluetooth handshake, not the app juggling pairs.
I think it comes down to how much you move while using it. The curved shape does most of the work on its own, so if you’re just lying still letting it do its thing, carpet really shouldn’t be an issue. The weight of your body keeps it pinned down well enough.
Where it gets iffy is if you’re trying to adjust your position mid-session or shift around to get comfortable. That’s when you feel it want to scoot on softer carpet. I’d say if you’re the type to just set it and zone out for the 15 minutes, you’re fine. If you fidget a lot, you’ll probably be annoyed.
I’ve used mine on a denser low pile carpet and it never moved. Tried it once on a friend’s shag type rug and it was noticeably less stable. Not sliding across the room or anything dramatic, just enough to break the rhythm.
Most of these action cameras don’t ship with a card, and the Pro Capture is no different. I wouldn’t count on finding one in the box, even a small starter one. The included accessories list is pretty much just the mounts and the waterproof case, so storage is on you.
I grabbed a 128GB card for mine before a trip and honestly it was the right call. 4K eats up space faster than you’d think, especially if you just leave it recording while you’re moving around. For snorkeling especially, you don’t want to be stuck swapping cards or realizing halfway through that you’re out of space. The camera itself is fine for that kind of use once you have the card sorted.
One thing I’d say is don’t cheap out on some random no-name card either. I’ve had those fail on other devices before, and the last thing you want is losing footage from a day out. A decent brand card isn’t that expensive and it’s a one-time cost. So yeah, factor that into the budget before you buy, but it’s not a dealbreaker. The camera works well once you’ve got that sorted.
Mine’s been plugged in since I got it and I honestly forget it’s there most of the time. It runs a bit warm if I touch it, but no different from any other streaming stick I’ve had. For a bedroom TV that gets daily use, it’s been fine. I wouldn’t lose sleep over it.
I’m a side sleeper and mine stayed in place fine, but the jaw thing never fully went away for me. Not that it hurt or felt like my bite was off after a week, more like I was just always aware of it pushing forward. Some nights I’d forget about it, other nights I’d wake up and it felt like my teeth were sore. I only really use mine now when my sinuses are clear and I know I’m not going to toss around much, because on restless nights I’d end up taking it out halfway through without even remembering. If you’re the type who sleeps like a log, probably fine. If you move a lot, you might end up like me and just leave it in the drawer most nights.
Warmth after running Boost all night sounds about right. That mode pushes the ceramic core harder and it’s going to produce some heat as a side effect. Mine does the same thing if I leave it on Boost longer than a few hours, and it’s been running fine for months now.
Worth keeping an eye on if it ever gets actually hot to the touch, but a noticeable warmth is just the unit working. The fridge being closed all night traps that heat in there too, so it doesn’t dissipate as fast. I’d say check the battery level more than the temperature. If it’s still holding a charge normally and killing odors like it should, I wouldn’t overthink the warmth.
Older machines can be a bit of a gamble, but the mounting plate is pretty much a universal size. Mine is a no-name brand from years ago and the VultrioX bolted right on without any fiddling. Just check that your drive shaft has the same thread pattern, that’s usually where people run into trouble.
That’s just leftover product, happens when you don’t work it down enough. Give it another quick pass and it clears right up.
If you want the full effect, yeah, ice makes a noticeable difference. Water alone just kinda feels like a damp fan blowing on you. It’s not bad, but it’s not exactly refreshing either.
I wouldn’t stress about doing it every day. Just keep a small bag of ice in the work freezer and grab a handful when you remember. Days you skip it, you’ll still get some airflow, just don’t expect a miracle.
Mine did the same thing, but honestly I figured it was just the surface breaking in. The rough grit on the smoothing side is never going to stay like day one, that’s how these things are. I don’t press hard at all and it still lost that new feel after maybe two weeks of regular use. As long as it still gets the edge off, I’m not bothered.
Faster than a rack? For me it was less about speed and more about not having clothes hanging around for two days. Everything dried overnight, which was good enough. But I also didn’t notice a huge difference on thin stuff, so if you only wash light fabrics, maybe not worth it.
I use mine mainly because it shuts off if it tips over, which my old radiator never did. That alone was worth the swap for me since I’ve got pets that knock stuff around. The heat itself is fine, just less of a cozy blanket feel.
Mine’s been decent, but I wouldn’t call it exact. I set the fence around my yard and it alerts me when he crosses, but the notification usually comes a minute or so after he’s already out. Good enough for peace of mind if you check the app fairly quick, not if you expect a precise boundary line.
I never had the old ones, but I picked up an AlarmTag a while back and the pin comes out without much effort. I keep mine on my keychain so it gets jostled around a lot, and it hasn’t popped out on its own. For my money, I’d rather have one that’s a little too easy to pull than one I have to fight with.
I’ve had mine on hardwood for about six months now. It doesn’t slide during normal use, but if I drag my chair over it by accident it does bunch up a little. Not a dealbreaker, just something to be aware of if you move your chair around a lot.
The 50m rating is more about pressure than motion. In a pool, moving your arms through water creates more force than sitting still at depth, so the rating isn’t a guarantee. I’ve worn mine in the ocean a handful of times and it’s been fine, but I wouldn’t trust it for daily lap swimming. The seals on these rings are tiny, and if water gets in, the sensors are done. I’d keep it for splashes and showers, not regular pool sessions.
The foam level caught me off guard too, but it settled down way faster than I expected. As long as it isnt pouring out onto the floor, you are probably fine. The reaction does die off pretty quickly once the hot water cools.
The weight isn’t really the issue, it’s more about having one hand busy with the hose while you’re trying to keep your balance on the ladder. I’ve done it once and it was awkward enough that I wouldn’t call it a smooth operation. You can make it work if you’re careful, but it’s not something I’d want to do for a full side of the house.
I gave it a shot in mine and it actually worked okay, but my cup holders are pretty wide and shallow. The narrow nozzle fits, but if you’ve got one of those deep wells with a rubber insert at the bottom, you’re probably going to be fishing stuff out by hand anyway.
The trend graphs are actually fine in the app, they don’t make you dig for them or anything. I just weigh in at the same time every morning and ignore the daily number, but the weekly line is pretty clear. It won’t tell you anything you couldn’t figure out with a normal scale and a notepad, but it does the boring part for you.
Alright, thanks for the replies. Sounds like the filter costs are pretty reasonable, so I’ll probably just grab one and see how it goes.
Probably works well enough on most normal hoses, but if your pressure is really weak you might be disappointed. I wouldn’t expect it to magically fix a bad setup.
Honestly that sounds about right to me. I run mine on medium heat for about 15 minutes most nights and I’m charging every 4 or 5 days. If you’re doing the full 20 with heat every time, every 3 days doesn’t seem off. I wouldn’t worry about it unless it starts dying mid-session.
I noticed the same thing with mine. It feels like it needs a deliberate pull compared to older alarms I’ve had, but honestly that kind of makes me feel better about carrying it in my bag. I haven’t had it long enough to know if it loosens up, but it’s not bothering me so far.
I think you’re overthinking it. Mine worked fine right out of the box without any extra pressure, so maybe your file is seated wrong or you’re hitting the angle off.