Dave Runner

Forum Replies Created

Viewing 30 posts - 1 through 30 (of 63 total)
  • Author
    Posts
  • in reply to: Does the Vital Shoulder Massager fit over a hoodie? #18280
    Dave RunnerDave Runner
    Member

    Mine goes over a hoodie without a fight, though I usually end up pushing the sleeves up anyway. The fit is fine, it’s just a bit less direct on the shoulder than bare skin. Good enough for a cold morning though.

    in reply to: SonaBuds touch controls vs old buttons? #18043
    Dave RunnerDave Runner
    Member

    Not really, I still catch one now and then during translation chats.

    in reply to: SonaBuds touch controls vs old buttons? #17839
    Dave RunnerDave Runner
    Member

    The taps themselves are pretty consistent when I actually mean to do them. It’s not hit or miss in that sense. The problem is entirely on my end, where my fingers land when I’m just nudging the earbud back into place. I pause things way more than I miss an intentional tap, if that makes sense.

    I do use them for translation a fair bit, so I’m reaching for them more than I ever did with music-only buds. That’s probably why it bugs me more than it would otherwise. During a conversation I’m adjusting them constantly, and every so often I’ll get a random pause in the middle of someone talking.

    I haven’t figured out a spot to grab that avoids it every time. I’m better than I was a few weeks ago, but I still catch one maybe once or twice a day. So the controls work fine. It’s my hands that are the issue.

    in reply to: Does the Pro Capture need the app for basic recording? #16780
    Dave RunnerDave Runner
    Member

    I still use the app for the first setup and then leave it alone after that. Mine records fine from the button, but I found the app handy once for lining up the angle before I bolted the mount down. After that it just lives in my pocket. One thing I did notice is the button press takes a second or two to actually kick off, so give it a moment before you start pedaling. Not a big deal once you know it. Battery also drains quicker if WiFi is left on, so I turn that off in the app and forget about it. For clipping on and going, you really don’t need the phone at all.

    in reply to: Do you really need a baseline for your wellness metrics? #16759
    Dave RunnerDave Runner
    Member

    I upgraded mostly for the sleep baseline and it’s been handy for exactly that Tuesday night situation. Seeing a rolling average makes one rough night look a lot less dramatic. I don’t check the dashboard every morning though, usually just once a week when I sync.

    Dave RunnerDave Runner
    Member

    Swapped mine last year and it’s been a solid upgrade for me. The install takes a bit of patience but once it’s in you basically forget it’s there. Battery’s been fine, my setup only runs while the car’s on anyway.

    in reply to: Glacier Breeze on a power bank? #16285
    Dave RunnerDave Runner
    Member

    Mine ran for about three hours on low off a mid-size bank last weekend before I packed up. Plenty for patio use if you ask me.

    in reply to: Does the iTagPro app show the last spot automatically? #16249
    Dave RunnerDave Runner
    Member

    Mine doesn’t just show it automatically, or at least not the way I expected. When I first got it I assumed it would keep the map pin updated whenever my phone was near the tag, but in practice the spot only seems to refresh when I actually open the app and let it connect. If I don’t open it for a day or two, the pin sits exactly where it was last time I checked. So for your bag situation, the spot you saw was probably from that last moment your phone and the tag were close, not a live thing running in the background. It still helped me find my keys in the couch once, but I had to open the app and wait a second for it to catch up. Not a big deal, just don’t count on it staying current on its own.

    Dave RunnerDave Runner
    Member

    I look at the weekly average, not the single night. One dip after a harder workout or a late dinner happens to me all the time, and the next morning it’s right back to normal.

    in reply to: Does CoolJet work with a power bank? #15422
    Dave RunnerDave Runner
    Member

    The whole “needs a wall adapter” thing is overblown. Mine’s been running off nothing but a power bank since I got it and it’s been fine. As long as your bank isn’t ancient it’ll work.

    in reply to: Qinux Vibrathea for shoulder after desk work? #15164
    Dave RunnerDave Runner
    Member

    I get way more out of mine on my lower back than shoulders, but the pads do need to sit right on the meaty part or it just tickles. Ten minutes with the heat on is my usual. It won’t fix a whole day of sitting, but it takes the edge off.

    in reply to: AiraBreeze outside on a covered patio, does it actually help? #15000
    Dave RunnerDave Runner
    Member

    Mine earned its spot on our screened porch this summer. Evenings here get humid, but sitting within a few feet still felt noticeably better than plain air. Dragging it out is worth it if you keep it close.

    in reply to: Omnihear for phone calls? #14624
    Dave RunnerDave Runner
    Member

    Mine handles calls better than I expected, but I switch to the phone’s speaker instead of holding it up to my ear. Keeps things clear without the feedback whistle. Takes a second to get used to but it’s easy enough.

    in reply to: Black Falcon Drone: how do you know when the battery is full? #14503
    Dave RunnerDave Runner
    Member

    Mine goes green when it’s topped off, takes about 45 minutes or so. If yours stays red past that I’d keep an eye on it.

    in reply to: WineCork Pro — does it work with slightly wider bottles? #14443
    Dave RunnerDave Runner
    Member

    Mine handled the wider bottle I tried, but I still keep a manual opener in the kitchen. I just prefer having it around for older corks anyway.

    in reply to: NuraFix and UV protection: does it actually do anything? #14270
    Dave RunnerDave Runner
    Member

    I reapplied mine before a beach trip last summer and the paint still looked decent after a week of sun. No idea if that’s the NuraFix or just my clear coat doing its job though. Either way it’s cheap enough to spray on again.

    Dave RunnerDave Runner
    Member

    The screen thing is kinda overblown in my opinion. I’ve used cams with and without and the times I actually glance at the screen while riding are pretty rare. You’re usually moving, hands busy, and stopping just to check framing gets old fast.

    What I do notice is the phone setup gets annoying in cold weather. Pulling your phone out with gloves on is a pain and the battery drains quick. So if anything sold me on a screen it was that, not framing.

    That said, if your old cam is working fine I wouldn’t rush to swap just for the screen. The bulk difference isn’t huge but it’s there, and you already know your workflow. If it’s not broken, the upgrade is more of a nice-to-have than a game changer.

    in reply to: Does iTagPro actually work for finding your phone? #13918
    Dave RunnerDave Runner
    Member

    I use the phone-finding side more than the tag-finding side at this point. My keys basically live on the hook now, but my phone still wanders off constantly, mostly onto the kitchen counter or into the laundry pile.

    What actually sold me on it was a pretty boring situation. I was heading out the door one morning and couldn’t find my phone anywhere. I’d already gone through the usual routine of patting pockets and checking the couch. Then I remembered the tag was clipped to my bag, so I pressed the button on it and heard the phone buzzing from somewhere in the bedroom. Turned out it had slid under a pile of clothes on the chair. Took maybe ten seconds total.

    That’s really all it does though. It makes the phone ring. There’s no map pointing you toward it or anything like that. For me that’s fine because nine times out of ten my phone is somewhere in the same house, just buried under something. I’ve probably used it that way a dozen times over the last few months and it’s worked every time.

    I wouldn’t buy it thinking it’ll track a phone that’s genuinely gone, but for the around-the-house stuff it does the job.

    in reply to: Is it normal for the DrFlexa to feel loose after a few hours? #13703
    Dave RunnerDave Runner
    Member

    Mine actually got tighter if anything after the first hour or so, not looser. Different knees I guess. I’d say it’s probably just how you’re strapping it, not the brace itself.

    in reply to: Qinux Vibrathea: how often do you actually use it? #13315
    Dave RunnerDave Runner
    Member

    Daily is fine if the sessions are short. I’ve used mine most evenings for months, usually 15 minutes on my shoulders while watching TV, and nothing has felt off. I’d just keep the intensity moderate and let your back tell you if it’s too much.

    in reply to: Pro Capture: does the built-in screen work in bright daylight? #12508
    Dave RunnerDave Runner
    Member

    Mine has surprised me actually. I did a long ride last month with the camera mounted on the bars and the screen was still readable at noon. Not like a phone in full brightness, but I could frame shots and check settings without guessing. The matte finish on the screen helps a lot compared to the glossy ones I’ve had before. I mostly shoot with the sun behind me though, so maybe that’s part of it. For hiking it’s been fine too, I just tilt it a bit when I need to see. I still use the app sometimes for remote stuff but I don’t feel forced into it. If you’re mostly shooting into the sun it’ll be tougher, but for normal riding and walking around it does the job.

    in reply to: Flixy vs old Roku stick, is the remote lag annoying? #12500
    Dave RunnerDave Runner
    Member

    Mine felt a bit sticky the first week too, but it smoothed out after I cleared a couple apps I wasn’t using. Could be coincidence, but scrolling feels fine now.

    in reply to: Does the WellHeater get as warm as those old oil-filled ones? #11572
    Dave RunnerDave Runner
    Member

    Oil heat lingers, ceramic is more instant.

    in reply to: Qinux ScryneX for gaming? Input lag question #11382
    Dave RunnerDave Runner
    Member

    Swapped from a painted wall to this screen a few months back and my lap times stayed the same, so I never noticed anything off. If anything my picture looks sharper now. I’d look at your projector’s settings.

    in reply to: Qinux Zindoggo collar size for a small dog? #11377
    Dave RunnerDave Runner
    Member

    Mine fits my 12 lb terrier mix fine, but I did notice the collar sits a bit high on his neck compared to his old one. It hasn’t rubbed him or anything after a couple months of daily walks. The strap does loosen up over time, so I check it every week or so.

    in reply to: Does the Qinux Gravizer need any setup before first use? #11029
    Dave RunnerDave Runner
    Member

    Good info, grabbing one this weekend.

    in reply to: Does the Qinux FelinStop actually work on birds? #10796
    Dave RunnerDave Runner
    Member

    Different animals react to different frequency settings. I bumped mine up a notch and the pigeons finally stopped landing on my shed roof. Robins still don’t care though, so I just leave it.

    in reply to: Does DrFlexa side stabilizers feel too rigid for sitting? #10293
    Dave RunnerDave Runner
    Member

    Mine are fine when I’m sitting, but I noticed the digging feeling goes away once I stop overthinking the strap tightness. I spent the first week or so adjusting them constantly, trying to find that sweet spot between locked in and comfortable. Turns out I had them a bit tighter than needed.

    What helped me was loosening the lower strap just slightly before sitting down for longer periods. Not enough to make the brace slide around, but enough that the stabilizers aren’t pressing into the same spot for an hour straight. I also shift position more often than I used to, which probably helps.

    The brace has softened up some over the last month too. Newer ones are stiffer out of the box and take time to mold to your leg shape. If you’ve only had it a few days, give it a couple of weeks before deciding it’s a dealbreaker.

    in reply to: Does the Qinux Vapoxis leave streaks on windows? #10222
    Dave RunnerDave Runner
    Member

    I had the same thing happen the first couple times I used mine on the windows in the living room. What I found was that it really depends on how fast I move the nozzle across the glass. If I go slow and let the steam sit for even a second too long, it leaves those drying marks. When I speed up and keep a steady pace, it looks much better. That said, I still keep a dry microfiber cloth nearby for the edges and corners where the steam tends to pool up a bit. The main pane usually comes out fine now, but the bottom edge always needs a quick wipe. I would not say it is a flaw with the unit, just one of those things you get a feel for after a few tries. The kitchen window can also be trickier if there is any cooking grease film on it.

    in reply to: TrimZa for someone with shaky hands? #9994
    Dave RunnerDave Runner
    Member

    It really depends on how much control he has left. My dad got one a few months back and the guard does its job, so no nicks or cuts, but I would not say it made the whole process easy for him. The button is the part that gave him trouble because he has to keep it pressed while moving the trimmer along the nail, and that combination is where the shaking shows up the most. He can do it, but he still needs to brace his wrist against the table or his knee to steady himself.

    The one thing that surprised me is how much slower it is than a regular clipper. That is actually a plus for him since there is less pressure to get it done quickly. He just goes nail by nail and takes a break if his hand gets too tired. I would say it is worth trying if the goal is safer trimming, but it is not a set it and forget it tool. He still has to be patient with it.

Viewing 30 posts - 1 through 30 (of 63 total)