Forum Replies Created
-
AuthorPosts
-
Tom RayMemberI’ve had the SawShark for a while and I still think the old guide does basically the same job. The angle control sounds nice on paper, but I never noticed a real difference in how the chain cuts. I wouldn’t bother switching if the basic guide already works for you.
7 de September de 2026 at 04:27 in reply to: SpyFocus battery okay if left on motion detect all day? #9938
Tom RayMemberI don’t think you need to worry about charging it nightly unless your space is super active. I’ve left mine running motion detect for a couple days straight and it held up fine. The battery drops noticeably faster if you keep popping into the live feed, so as long as you’re not doing that constantly it should get you through at least two days.
6 de September de 2026 at 20:26 in reply to: Qinux Vibrathea how long do you usually leave the pads on one spot? #9895
Tom RayMemberThe manual times always read like they were written by someone who’s never actually sat still with a TENS unit. My first week I tried to power through the full 15 minutes on my lower back and ended up with my muscles doing that weird twitching thing that makes you question if you’ve got a wiring problem. Now I just follow what my body says. Some sessions I’m fine parked on one spot for a long stretch, especially if I keep the intensity moderate. Other days the sensation builds up fast and moving the pads after a few minutes is the only way to keep it comfortable. I don’t think there’s a right answer. The unit isn’t going to punish you for relocating the pads mid-session. It’s not like you’re losing the therapeutic effect by shifting things around, you’re just not forcing yourself into that overstimulated zone. Better to enjoy the session than to stare at the clock waiting for it to end.
Tom RayMemberThe lag you’re describing is pretty much the whole reason I stopped using my previous tracker. With the Zindoggo, I can’t say I’ve sat there with a stopwatch timing it, but the notification hits before I’ve even gotten off the couch to go look out the window. The old one would go off after the dog had already crossed into the neighbor’s yard and made friends with their cat.
Tom RayMemberMy dog basically ignores ours unless something gets zapped, then she perks up for a second and goes back to whatever she was doing. She’s never tried to sniff it or get close to the grid while it’s active. I wouldn’t park it right next to the bowl just because of the noise factor while she eats, but a few feet away seems totally fine.
3 de September de 2026 at 14:03 in reply to: Does Translattia work better with the app set to one language pair? #9387
Tom RayMemberI’ve had three pairs saved since I got mine and honestly I don’t think the number matters. The app just remembers what you used last and goes with it. I switch between English and Japanese all the time depending on who I’m talking to and it never misses a beat.
1 de September de 2026 at 22:05 in reply to: Does the DappSmile actually help with coffee stains or is that just marketing? #9130
Tom RayMemberIf you’re already dealing with stubborn buildup, it’s not going to fix that overnight. It’s more of a scrape-and-polish for the front surfaces that you can see in the mirror. I’d say just start on the gentlest setting and don’t press hard, that’s where people mess up and end up regretting it.
29 de August de 2026 at 15:53 in reply to: Does the Qinux VultrioX fit most standard brush cutters? #8614
Tom RayMemberI’d say check the mounting holes on your current head before you order. The plate part is pretty standard, but I’ve seen older machines where the holes don’t line up perfectly with the newer heads. It’s not a dealbreaker usually, you can often make it work, but it’s worth a quick look first.
28 de August de 2026 at 03:03 in reply to: Does the CoolJet need ice to work well or is water enough? #8367
Tom RayMemberIce is a must for me, water alone just doesn’t cut it.
27 de August de 2026 at 14:12 in reply to: Anyone else find the TrimZa filing surface wears down fast? #8292
Tom RayMemberMine definitely mellowed out after the first few weeks, but it didn’t keep going. It felt like the surface sort of hit a baseline and stayed there. I’ve had mine for a couple months now and the smoothing side still works, it just takes a few more passes than it did on day one. I think the initial grit is almost like a coating that wears off, and then you’re left with the actual working surface underneath.
If yours is still trimming fine and you’re not having to fight with it, I’d say just keep using it normal. The only time I’d worry is if it starts leaving rough edges or you have to push hard to get it to do anything. Mine never got to that point. I wouldn’t start pressing harder to compensate, that’s probably how you’d actually wear it out faster. Just let it do its thing at its own pace.
22 de August de 2026 at 13:01 in reply to: Ozoori placement in a small fridge, any spots that work better? #7687
Tom RayMemberI’ve had mine in the door for a while now and it’s been fine. The airflow argument never really made sense to me since it’s not like the fridge is sealed off in sections. If anything, having it out of the way means I actually remember to charge it before it dies.
22 de August de 2026 at 11:20 in reply to: WineCork Pro vs. my old manual corkscrew: is the noise normal? #7666
Tom RayMemberI noticed the same thing honestly. Mine has a pretty clear motor whirr but it’s been consistent for the couple months I’ve had it and hasn’t gotten worse or anything. If yours sounds steady and not like it’s struggling, I’d say it’s just how these things are.
Tom RayMemberThat much foam is pretty standard for this stuff. The chemical reaction needs volume to push through the pipe, so if you don’t see a decent head of foam, it’s probably not doing much. I’ve used it a few times now and the first application always looks dramatic, especially on a slow drain where there’s actual gunk for it to eat through.
I will say the foam level depends on how much buildup is in there. On a drain I maintained regularly, it barely bubbles over. On one I let go for a while, it looked like a science experiment. So if you got a big reaction, that’s probably a sign it found something to work on.
If it gets too close to the overflow for your comfort, just use a little less powder next time or add the hot water slower. But I wouldn’t change the amount too much or you’ll lose effectiveness.
16 de August de 2026 at 06:47 in reply to: Does Flixy work okay if I mostly use it for screen mirroring? #7253
Tom RayMemberI’m probably in the minority here but I’ve actually had a pretty solid experience with the mirroring. I bought mine mostly for travel and I use it to throw up stuff from my laptop more than my phone. Did a presentation for work in a hotel room once and it held up fine, no weird drops or anything. That said, I keep my expectations low because it’s not like I’m trying to game or watch super high bitrate stuff through it. For basic video and photos it does the job.
I do think the phone matters a lot though. My old Android was choppy as hell, but my newer one connects way faster and stays stable. So if you’ve got a decent phone you’re probably fine. I wouldn’t stress too much about it, just test it once at home before you rely on it somewhere else.
Tom RayMemberOne-handed on a ladder sounds like a soaked shirt and a bad grip waiting to happen.
9 de August de 2026 at 20:25 in reply to: Does Repellio work in a garage or is it mainly for indoor rooms? #6849
Tom RayMemberI wouldn’t overthink the cold thing. But for me the bigger question is whether you actually want to rely on it as your only line of defense in a garage. I ran one in my workshop for a season and it seemed to keep things quieter, but I also had a few traps set up as backup. The soundwaves don’t care about temperature, but they do bounce around weirdly if you’ve got a lot of shelving or boxes stacked up. Garages tend to have more clutter than a bedroom, so the coverage ends up uneven no matter what the box says. I’d say plug it in near where you’ve seen the droppings, not just wherever the outlet is easiest. And if your garage is attached to the house, you might want one inside too, because the mice might just move closer to the door instead of leaving entirely. It’s not a bad tool, just don’t expect it to do all the work by itself.
8 de August de 2026 at 13:05 in reply to: Does the GrillWizz work on really old caked-on grates? #6754
Tom RayMemberI was in the same boat last year. My grates had that thick black crust that makes you question your life choices. The Wizz isn’t magic, but it does the job if you’re willing to put in a little work. I found that hitting it on the highest speed and letting the brush do the spinning instead of pressing down hard is what makes the difference. The old stuff comes off in chunks, not like a powder, so you’ll want something to wipe the debris away as you go.
The one thing I’ll say is that I prefer using it on a warm grill, not scorching hot, but warm enough that the gunk has softened a bit. Cold grates with months of buildup are a much slower process. I keep mine in the garage and only bust it out for the deep clean a few times a season. For regular maintenance I still just use a standard wire brush. But for the nasty stuff, yeah, it earns its spot.
Tom RayMemberI picked one up mostly for travel and it’s been fine, but for a 6-year-old I think you’re still better off just using the regular clippers if you’re already comfortable with them. The guard is decent, but it’s not like it turns trimming into a zero-effort thing. Small nails are okay, just slower. I don’t think you’re missing much if you skip it.
1 de August de 2026 at 10:44 in reply to: How long do you leave the Nunawave Oral Care Pro in for? #6250
Tom RayMemberThe preset timer is fine, but I usually cut mine short. I think the full cycle is more than my gums need most days, and I still notice the same effect after a couple of minutes. Once you get used to it, you just know when you’re done.
1 de August de 2026 at 09:23 in reply to: ClairLite UV lamp safe to run while I’m in the next room? #6246
Tom RayMemberThe UV isn’t going to leak through walls or anything like that. If it did, the product would be useless since it’s meant to be run in empty rooms. The door closed is enough. I wouldn’t overthink this one.
30 de July de 2026 at 15:26 in reply to: Heater Pro X making a faint clicking sound when it cycles off – normal? #6125
Tom RayMemberThat little click is just the relay cutting the power when it hits the set temp. I’ve got mine in my workshop and it does the same thing every time. Nothing to worry about, it’s just the sound of it doing what it’s supposed to do.
27 de July de 2026 at 08:36 in reply to: Does the Epicooler need to be near a window for the cooling to work? #5907
Tom RayMemberI get the confusion since most portable coolers need a window hose, but this one doesn’t have one so it’s just blowing air around. It does cool down the space right in front of it pretty well though, just don’t expect it to handle a whole room like a window unit would.
23 de July de 2026 at 09:04 in reply to: WineCork Pro vs. old rabbit-style opener – quieter or not? #5757
Tom RayMemberI mean, the pop from a rabbit style is pretty quick, I never really thought it was that loud. The WineCork Pro is quiet enough though, just a hum for a few seconds.
Tom RayMemberI doubt the cover would mess with it much. I’ve had mine tucked into all sorts of slots and it still pings fine when I check the app. Probably more of a worry if you were wrapping it in something metal, but leather isn’t gonna do anything.
12 de July de 2026 at 16:43 in reply to: Does SavingStars work for really slow kitchen drains? #5063
Tom RayMemberI used it on my kitchen sink and it seemed to do the trick for the slow drainage. Not sure if it’s some miracle solution but it definitely helped things move along faster.
10 de July de 2026 at 22:40 in reply to: Does the SleepZee actually help with mouth breathing? #4958
Tom RayMemberI skimmed through this and I think people are overcomplicating it. The vents are just a backup, not a fix for mouth breathing. I’ve had mine for a few weeks and it works fine for snoring, but my mouth still opens sometimes.
Tom RayMemberPretty sure if the passport cover already blocks RFID, the Guardality card is just redundant in there. Not gonna mess anything up, but you’re probably carrying around extra plastic for no real reason.
8 de July de 2026 at 07:03 in reply to: Guardality fit in a slim cardholder with 4 cards already? #4731
Tom RayMemberHonestly, I’d just try it. The Guardality card is thin enough that if you’re already squeezing four in there, one more probably won’t make or break it. Worst case you take it out, but I doubt you’ll notice much difference.
3 de July de 2026 at 22:40 in reply to: Does rain-x stuff actually make cleaning windows easier? #4444
Tom RayMemberI tried it once and it seemed fine but nothing life changing. I wouldn’t bother reapplying or anything, just a quick wipe down does the same job for me.
Tom RayMemberI’d say the battery is fine for a couple grills on high. I’ve never had mine die before I was done, but I’m not really timing it either. Probably not hitting that 90 minute claim though.
-
AuthorPosts
