Max Connor

Forum Replies Created

Viewing 26 posts - 1 through 26 (of 45 total)
  • Author
    Posts
  • in reply to: Does Repellio need to stay plugged in 24/7? #12020
    Max Connor
    Member

    I actually ended up running mine during the day instead of at night because my place is empty then, and that seemed to make more of a difference than anything. Pests get used to whatever routine you set, so flipping it on and off randomly probably isn’t doing you any favors.

    in reply to: Qinux BlackOptic for watching bats at dusk? #11773
    Max Connor
    Member

    I only really use mine around 8 or 9pm when there’s still a bit of light left and it does fine for birds and stuff moving against the sky. Bats should show up okay, they’re just small so you mostly catch the shape flicking past. Mine’s the basic model though so the zoom helps more than anything.

    in reply to: Qinux AirdrobeX vs old drying rack: noise difference? #11477
    Max Connor
    Member

    The fan noise on mine is actually kind of soothing, like a little white noise machine in the corner. I run it overnight sometimes and it helps me sleep. Different strokes I guess.

    in reply to: Heater Pro X for a chilly home office? #11450
    Max Connor
    Member

    For one chilly room, something like that is usually enough to take the edge off. Mine warms up fast but the heat stays pretty close to it, so it’s more of a “point it where you are” thing than a real room heater.

    in reply to: Does the Aptofit need a specific app or any fitness app works? #10937
    Max Connor
    Member

    I’d just pick one app and stick with it instead of bouncing between a few. That was my mistake at first. I had the Aptofit app on my phone plus another tracker I’d been using, and having both open seemed to mess with things. Not the steps, those were fine either way. But the heart rate readings looked different depending on which app I checked, and I couldn’t tell which one was actually pulling from the watch. Once I deleted the extra one and let the Aptofit app handle everything, it was way less confusing. So if you already have a fitness app you like, I’d try that one first and see if the basics come through. If they don’t, then fall back to the Aptofit app. I don’t know if the sleep data ever makes it over to other apps though, that part never worked for me.

    Max Connor
    Member

    Since I wasn’t sure either, I actually messaged their support before buying and asked for the full list. They sent it over pretty fast. Might be worth doing that if you’ve got a specific language in mind.

    Max Connor
    Member

    Mine have been fine with both my work laptop and phone, but I don’t think it’s fair to expect instant switching. There’s always a couple seconds where the audio has to catch up when I move between them. Never had to forget and re-pair though, it just remembers both and hops over when I select it.

    in reply to: Does the CoolJet work okay if you don’t fill it all the way? #10036
    Max Connor
    Member

    I’ve done the half fill thing plenty of times, usually when I’m just topping it off with whatever’s left in my water bottle. Never noticed it messing with the cooling much. It still blows cold air, just runs out sooner obviously. I think the 8 hour thing is only if you fill it to the top anyway, so you’re not losing anything by doing half. It’s not like it stops working or gets weaker when the tank isn’t full. The only thing I’d say is if you’re using ice, a half full tank means the water gets cold faster or stays colder for a bit, which is kind of nice. So I wouldn’t stress about filling it all the way every time. It’s not a fancy machine where you need to hit some exact level. Just pour what you’ve got and let it run.

    Max Connor
    Member

    I think it depends on what you mean by “different.” The Nunawave is definitely not the same as those cheap pharmacy ones, but it’s not like you’re wearing a whole different kind of appliance either. The material feels more solid and it sits a bit differently because it’s not just a thin plastic shell. It has more presence in your mouth, if that makes sense.

    The one big thing for me was the first few nights. A regular guard you kind of forget about after a while. With this one, I was more aware of it, mostly because it’s a little bulkier around the front teeth. That went away after maybe a week though.

    I wouldn’t say it’s harder to get used to, just different enough that you notice it at first. If you’re already used to sleeping with a guard, it’s not a huge leap.

    in reply to: Does the Qinux Klampero work on older chains or just new ones? #9654
    Max Connor
    Member

    I’m going against the grain here, but I don’t think it’s worth using on older chains at all. I grabbed one specifically to try and breathe some life into a chain that had been sitting in my shed for a couple seasons, and honestly, it felt like I was just wasting my time. The cutter teeth were uneven and the edges were pretty rounded off, and the tool just couldn’t get a good grip to do anything meaningful. It slid around more than it sharpened.

    I think the whole idea that it can restore a rough chain is oversold. If you’ve been using your chain regularly and just need a quick touch-up, sure, it’s probably fine. But if you’re hoping it’ll fix something that’s been neglected or abused, you’re better off just getting a new chain. I learned that the hard way.

    in reply to: Qinux ScryneX vs. my old pull-down screen for daytime use? #9649
    Max Connor
    Member

    It really depends what you’re comparing it to. My old pull-down had that grayish backing too, and the ScryneX is definitely brighter/whiter in comparison. I wouldn’t call it a plain white sheet, but it doesn’t have that same contrast-boosting tint, so daytime viewing in a bright room will wash out a bit more. For a living room with windows, I’d keep expectations realistic.

    in reply to: Is the Qinux BlastVul easy to carry around or is it bulky? #9627
    Max Connor
    Member

    For me it came down to how you hold it while working. I didn’t find the weight bad, but the shape makes it awkward after a bit if you’re reaching around stuff. Not bulky exactly, just not as balanced as I hoped.

    Max Connor
    Member

    The prickly sensation usually calms down for me once my muscles get used to the level. I found that starting at a medium for a minute or two before bumping it up makes the transition way smoother and less jarring.

    in reply to: Do the SonaBuds pick up background noise during calls? #9502
    Max Connor
    Member

    i’ve used mine in an airport and on the train a few times. the other person could hear me okay, but i could tell they were hearing some of the rumble in the background too. it wasn’t terrible, just noticeable. i wouldn’t expect them to completely cancel out loud environments, but for normal calls they’ve been fine for me.

    in reply to: Clima Pest Guard near a pet bowl? #9406
    Max Connor
    Member

    We keep ours in the hallway near the laundry room, not right by the bowls, but the cat definitely wanders over to it sometimes out of curiosity. She’s never gotten zapped or seemed bothered by the glow. If the dog is super nosy, maybe just watch her the first time it kicks on.

    in reply to: Keilini Heater Pro noise level in a bedroom? #9152
    Max Connor
    Member

    The hum would drive me crazy all night.

    Max Connor
    Member

    I get why people say it’s manageable, but I had a different experience on my windows. The spray tends to fan out more than I expected once you pull back even a little, and that’s when it starts leaving droplets everywhere. It’s not a total mess, but I wouldn’t call it neat either.

    in reply to: Does the ChirpyCharm need direct sunlight for the solar panel? #8939
    Max Connor
    Member

    Good to know, thanks for the input everyone. Sounds like I’ll just keep the USB cable handy.

    Max Connor
    Member

    I’m terrible at schedules too, so I just set a reminder on my phone for every three months. Takes two seconds and I don’t have to think about it. The water pressure drop is pretty gradual, so I wouldn’t rely on feeling it.

    in reply to: Does the Qinux Talkbuds work with any Bluetooth phone? #8424
    Max Connor
    Member

    I’ve paired mine with a Pixel and it worked the same as any other Bluetooth earbuds I’ve used. The app is where the translation stuff happens, but as regular earbuds for music and calls they connect fine. I didn’t have to mess with developer options or anything like that.

    in reply to: Anyone else find the TrimZa filing surface wears down fast? #8317
    Max Connor
    Member

    It still smooths fine for me, just takes a few more passes than it used to.

    in reply to: Coolizi Coolzy noise level in heating mode? #8314
    Max Connor
    Member

    I think people exaggerate how much louder it gets. I run mine in heating mode almost every evening and the difference is pretty minor to me. Maybe I just don’t notice it as much since the room is already quiet, but I wouldn’t let that stop you.

    in reply to: Where do you usually plug in the WellHeater? #8159
    Max Connor
    Member

    I’ve got mine sitting on top of a dresser about three feet from my bed and it’s been fine. I just made sure the cord wasn’t running under anything and that the front wasn’t pointed right at the curtains. Haven’t had any issues with it being near furniture, but I don’t shove stuff right up against it either.

    in reply to: Does the Nunawave Oral Care Pro feel bulky in your mouth? #8081
    Max Connor
    Member

    I think it depends a lot on what you’re used to. I wore mine maybe five or six times and it was fine for the first few minutes, but after a while I could feel it pressing against my cheeks. Not painful, just noticeable. If you already have a small mouth, I’d probably try to find one you can test or borrow before dropping the money on it.

    in reply to: Heater Pro X vs. my old plug-in radiator, any real difference? #8032
    Max Connor
    Member

    I think the real difference comes down to what you actually want from it. I grabbed a ceramic fan heater a couple years back for the same portability reason and honestly the heat is just different. The radiator feels like it warms the whole side of the room evenly. The fan one is more like standing in front of a warm breeze. It works great if you’re sitting still at a desk or reading in bed, but if you’re moving around the room it’s not the same cozy heat.

    That said, I actually prefer the fan heater for my setup. I work from home and I only need my little corner warm while I’m at my desk. I don’t really care about the rest of the room. If you’re the type that likes the whole room feeling warm and settled, you might miss the radiator. For me, the quick blast and easy moving around wins out.

    Max Connor
    Member

    Depends what you mean by screen protector. Mine had the usual thin plastic film on it when I opened the box, but that’s not really meant to stay on. I just left it on anyway since it’s been fine so far. It’s not the nicest feeling but it’s done the job for me.

Viewing 26 posts - 1 through 26 (of 45 total)