HarrY

Forum Replies Created

Viewing 30 posts - 1 through 30 (of 80 total)
  • Author
    Posts
  • in reply to: DashOne Pro motion detection setting? #17938
    HarrY
    Member

    The sensitivity slider is the only control, and it’s pretty coarse. Mine still picks up moving shadows at the lowest notch, so calling it a real fix is generous.

    in reply to: WineCork Pro and older bottles? #17424
    HarrY
    Member

    Mine did fine on a bottle I’d had open for a couple weeks, cork came out in one piece. It’s not magic though, if the cork is already crumbling nothing is saving it.

    HarrY
    Member

    Freezing can also be a fit issue, not just unfamiliarity. My last dog stood like a statue in one harness and it turned out the strap was sitting right on his shoulder. Once I loosened that bit he moved around fine. Worth checking where the straps actually land before assuming it’s just newness.

    in reply to: MrBold Pro for quick touch-ups? #15580
    HarrY
    Member

    Scissors being faster is one of those things that sounds true until you actually time it. I used to keep a little pair in the bathroom cabinet for exactly that reason, quick swipe before heading out. Problem was I’d always miss a few because you can’t really see what you’re doing up there, so I’d end up going back for a second pass, then a third. That’s what actually ate the time.

    Got one of these rotary trimmers last year, different brand but same idea. Once a week is basically how I use it, Sunday night usually, takes maybe fifteen seconds. You just poke it in and move it around a bit. The thing that sold me is you don’t have to aim. With scissors you need a steady hand and decent lighting and a mirror angle that doesn’t make you look like you’re trying to solve a puzzle.

    Battery thing is the only real annoyance. Mine sat in a drawer for a couple months, I grabbed it in a hurry and it was dead, so I had to fall back on the scissors anyway. Charge it every few weeks and you’re fine, forget and you’re not.

    Weekly use isn’t going to wear it out fast, that’s nothing for a motor. Whether it beats scissors for you depends on how good you are with the scissors. I wasn’t.

    in reply to: Is it safe to use old tool batteries for a DIY power bank? #15534
    HarrY
    Member

    Not sure I buy the whole “you’ll fry your phone” thing. I’ve used an old 18v pack with one of those cheap buck converters for a couple camping trips and my phone is still fine. The bigger issue for me was that the pack just doesn’t hold much. Two nights and it was basically dead, and I wasn’t even charging much. So it works, but it’s not some magic free power source. The cells in those drill packs are old and tired. If you’re expecting it to replace a real power bank you’ll be disappointed. Fine for a quick top up, not much else. And you do need something to step the voltage down, can’t just wire it straight to USB.

    HarrY
    Member

    Comparing them is pointless if you ask me. The ratings don’t translate between brands, and most people won’t notice the difference anyway. Just pick one with a return policy and try it. If it feels too weak on your legs, send it back.

    in reply to: ClairLite for a closet with no outlet? #14985
    HarrY
    Member

    I’d be more worried about the closet itself than the cord. UV-C needs direct line of sight to actually do anything, so a cramped closet packed with clothes and boxes is basically a maze of shadows. Anything tucked behind a jacket or in a corner isn’t getting hit no matter how long the timer runs.

    I used a similar lamp in a small spare room and it did help with that musty smell after a few cycles, but that room was mostly empty and open. A cluttered closet is a different situation. You’d have to clear it out completely every time you run the thing, which kind of defeats the convenience angle.

    So no, I don’t think it’s automatically a waste, but the outlet is the smaller problem. If you can empty the closet and run a cord for 20 minutes here and there, fine. If not, the lamp is just going to sanitize the air and whatever happens to be facing it.

    HarrY
    Member

    Mine actually drains a bit if I leave it in, so I pull it out between uses. Not a big hassle but it’s one more step. The click itself is fine, no fumbling.

    in reply to: Does GrillWizz brush head scratch older grates? #13631
    HarrY
    Member

    Mine scratched the coating on old grates.

    in reply to: Does NanoPolix need any prep before using it? #13483
    HarrY
    Member

    Cool surface makes a difference, I tried mine on a warm hood once and the cloth just dragged and left a smeary haze I had to wipe off. Early morning or shade works way better. Just clean the spot first and don’t expect miracles on anything you can feel with a fingernail.

    in reply to: AerioQ for a home office that gets warm in the afternoon? #13442
    HarrY
    Member

    A 10×10 room with afternoon sun is exactly the kind of space where a second unit makes sense, not overkill. I don’t buy the “one is enough” thing people say. Sun beating on a window for two hours can undo whatever cooling you had going.

    in reply to: Omnihear volume adjustments without an app? #12935
    HarrY
    Member

    I don’t care about apps either, which is why I gave this a shot. But if you’re hoping to avoid the manual completely, I’d say that’s optimistic. The controls work, but I still keep the little card around for the modes.

    in reply to: Herz P1 Smart Ring app require subscription? #12737
    HarrY
    Member

    The “no subscription” claim is easy to make at launch. What matters is whether it survives the first year or two once they’ve got enough people locked into the hardware. I haven’t seen the P1 specifically, but I’ve watched plenty of these apps start free and then quietly move sleep scores or trends behind a paywall later. If the listing doesn’t spell out what stays free long term, I’d treat that as the real question, not whether it’s free today.

    in reply to: Aptofit: can I turn off the constant heart rate light? #12657
    HarrY
    Member

    The light on mine only goes off if I take the watch off entirely. Otherwise it’s on whether I’m moving or not, so I stopped expecting the settings to fix it.

    in reply to: Qinux BitBip 89: how’s the save state function? #12630
    HarrY
    Member

    Save states worked when I bothered testing them, but I don’t trust them for anything long. One power cut and I lost a couple hours in a platformer, so now I just leave the stick running if I’m mid game.

    in reply to: Enence Translator really 1.5 seconds? #12476
    HarrY
    Member

    Mine actually got close to that on a few short greetings, so I don’t think the number is total nonsense. It was French and Spanish though, both pretty common. The moment I tried anything with names or numbers it went right past 3 seconds.

    in reply to: SleepZee: can I re-mold it if I mess up? #12259
    HarrY
    Member

    I remolded mine after a botched first try and it worked, but the plastic got noticeably softer after that second round. Still fits, just feels less solid than day one. So you get a redo, but don’t plan on five.

    in reply to: Derila Ergo too low for side sleeping? #12137
    HarrY
    Member

    A week is barely enough to know anything. I’m a side sleeper too and the Derila actually worked better for me once I stopped expecting it to feel like a regular pillow. My preference is a thinner profile though, so if you’re used to something taller this thing will feel off for a while.

    in reply to: Qinux BarkBuz for a dog that mostly barks outside? #12101
    HarrY
    Member

    The wall thing is the real issue. I had a similar setup where the dog was outside and the device was inside, and it barely picked anything up unless the window was open. Drywall and glass kill it. If your dog is out in the yard and the unit is sitting on a shelf indoors, I wouldn’t count on it triggering much.

    The outside vs inside thing matters too though. Out in the open, there’s nothing to bounce the sound back, so it’s more of a straight shot at the dog. Inside, it bounces around and hits them from everywhere, which some dogs find way more annoying. Mine didn’t care much either way after a couple weeks, but the first few days outside got a reaction, then nothing.

    Ten meters is a best case number. With anything in the way, cut that in half at least.

    in reply to: Does the CoolJet need to be plugged in the whole time? #11765
    HarrY
    Member

    Mine works fine unplugged, so the whole “tethered” thing is overblown.

    HarrY
    Member

    Heat was stronger than I expected on my back.

    in reply to: Does the Qinux Gravizer need any setup before first use? #11023
    HarrY
    Member

    Setup is basically nothing. Mine was ready after a charge, tips were already in. The learning curve is real though, and it’s not about assembly. It’s your hand. I still get wobbly lines on metal after a few weeks.

    in reply to: Does Guardality work if I keep it in my back pocket? #10499
    HarrY
    Member

    Keeping a card in your back pocket is asking for it to get sat on and bent anyway. Mine survived a few months there but ended up with a nice curve to it. Function still seemed fine, but a warped card is annoying.

    HarrY
    Member

    Good to know Im not the only one dealing with the occasional Bluetooth hiccup. Sounds like the usual tradeoff.

    in reply to: Does the CoolJet work okay if you don’t fill it all the way? #10080
    HarrY
    Member

    Half tank just means you refill sooner, that’s the only real difference.

    in reply to: Qinux Vibrathea how long do you usually leave the pads on one spot? #9899
    HarrY
    Member

    I move mine around a lot too. The 20 minute guideline seems like a maximum, not something you have to hit. I’d rather do shorter bursts on different spots than sit there forcing myself through the pins and needles feeling. Nobody’s timing you.

    in reply to: Is the Qinux BlastVul easy to carry around or is it bulky? #9566
    HarrY
    Member

    The size has never been the problem for me. It’s the battery that decides how long you’re willing to carry it around, since once that dies the whole thing is dead weight anyway. For patio furniture and a bike you’ll be done before your arms get tired.

    in reply to: Qinux WarmPro timer or does it just run until you unplug it? #9248
    HarrY
    Member

    That would be the last thing I want, a heater that shuts off on its own before the room is warm.

    in reply to: Matsato balance when cutting? #8546
    HarrY
    Member

    Never felt handle-heavy to me. I just grab it and cut, no issues. Maybe your grip is further back than mine or something.

    in reply to: AlarmTag vs old keychain alarm – is the pin easier to pull? #7795
    HarrY
    Member

    I pulled mine once to test it and it came out smooth, no wrestling match.

Viewing 30 posts - 1 through 30 (of 80 total)