Chris Writes

Forum Replies Created

Viewing 26 posts - 27 through 52 (of 56 total)
  • Author
    Posts
  • Chris Writes
    Member

    I’m actually the opposite of most people here. I took mine to a marsh area in early summer and it did next to nothing for me. The light was nice and bright, don’t get me wrong, but I was still swatting stuff off my arms while sitting a few feet away from it. I think the whole repellent thing is way more subtle than people expect, like it might make the bugs less attracted to the light itself, but it didn’t create any kind of bubble around me. I even had it hanging right next to my chair and I still got bit. I ended up using it as a regular lantern and relying on my usual spray for the actual protection. It’s a fine light, but I wouldn’t even call it a backup repellent, at least not in my experience. Maybe it works better in a drier area, but I wouldn’t risk a buggy weekend on it.

    Chris Writes
    Member

    Mine’s been on for about five months and the shower glass still gets spotty, so I would not buy it for limescale.

    in reply to: Does the Qinux BreezaMax really work well for a small bedroom? #7848
    Chris Writes
    Member

    For a 10 square meter room, I’d say it’s borderline but probably okay for what you’re describing. I use mine in a similar sized space and it does keep a light breeze going through the night, but I wouldn’t call it powerful. If you’re someone who needs strong airflow to fall asleep, this might leave you wanting more.

    Chris Writes
    Member

    I’ve worn mine in the pool a handful of times, not for laps or anything intense, but just swimming around with the kids. It tracked the session fine and the ring itself looks no worse for wear. I get the hesitation about the sensors, but mine has been fine so far.

    Chris Writes
    Member

    The number on the box is definitely doing a lot of heavy lifting. I don’t think anyone is sitting there counting every single ROM, but you’re right that a big chunk of it is just different versions of the same games. I got it mostly for the two controllers and the easy plug into the TV, and for that it’s been fine. The game list is more about quantity than quality, but there’s enough decent stuff in there to keep you busy for a while.

    in reply to: ODIN SafeWave EMF on a smart TV, any reason not to? #7010
    Chris Writes
    Member

    I think the heat concern is a bit overblown for most TVs honestly. These things are designed to sit on devices that warm up, and the adhesive is pretty solid. I’ve had one on my office monitor for a while now and it’s still exactly where I put it. The bigger thing is just making sure you stick it on a flat spot and don’t mess with it after.

    in reply to: Does TopCarPlay need a strong phone signal to connect? #6931
    Chris Writes
    Member

    I’ve had mine for about five months now and my office parking deck is basically a concrete bunker. I never even thought about cell signal when I got it, and honestly it’s never been an issue. The adapter does its own thing between the phone and the car, so the garage doesn’t matter for connecting. The one thing I did notice early on is that if my phone is in some weird low power state or the car’s USB port decides to be grumpy, that’s when I have to unplug and replug the adapter. But that’s happened maybe twice since I’ve owned it. For day to day use, especially in a spot where my phone shows no bars, it still pops up on the screen and connects before I even back out of the spot. So you should be fine.

    in reply to: Earscribe translation for quick back-and-forth? #6877
    Chris Writes
    Member

    It’s funny, I kind of like the pause in a weird way. It forces me to actually listen instead of just waiting for my turn to talk, which I’m guilty of in normal conversation anyway. The first couple of days it felt like the other person was just staring at me and I didn’t know what to do with my face, but now I use it as a little beat to nod or react before the translation comes through.

    I’ve also noticed it depends a lot on who I’m talking to. With some people, they get thrown off by the gap and start repeating themselves or talking louder, which makes it worse. But other people just roll with it and it flows way better. I think part of it is just finding the right rhythm with the person on the other end.

    I’ve only used mine for maybe a week and a half, so I’m no expert, but the awkwardness does fade a bit once you stop trying to fill the silence.

    in reply to: Qinux BlackOptic SD card slot feels loose or is it just mine? #6509
    Chris Writes
    Member

    I think if the card is clicking into place and staying there while you’re moving around, that little bit of play is probably nothing. I’ve had gadgets where the slot felt way looser and the card still worked for years. I’d just keep an eye on it and not mess with it unless it actually starts causing problems.

    Chris Writes
    Member

    Makes sense that it’s just the relay or whatever inside doing its thing when it powers down. Mine has done it since day one too and it hasn’t changed at all. Seems like one of those things you only notice when the room goes quiet. Anyway, glad it’s not just mine being weird, enjoy the warmth.

    in reply to: Do the Qinux Talkbuds work okay with just one earbud? #6088
    Chris Writes
    Member

    I’ve used mine that way a bunch of times and never had to mess with anything. Just popped one in and the translation came through fine.

    in reply to: Mounting the Qinux ScryneX on a brick wall – any tips? #6040
    Chris Writes
    Member

    Honestly, it’s not that deep. A brick wall is just a wall with a different texture, not rocket science. Grab some decent plugs and screws from the hardware store, drill carefully, and you’re done in ten minutes. People overthink this stuff way too much.

    in reply to: Qinux BlastVul nozzle options for glass windows? #5937
    Chris Writes
    Member

    Honestly, I wouldn’t overthink it too much. I’ve used mine on a couple of ground-level windows with just the regular wide nozzle and it was fine, no issues at all. Just keep it on the lowest setting and don’t hold the spray too close, it’s not really a big deal.

    Chris Writes
    Member

    I kinda like the stiffer pin actually. Makes me feel like it’s not gonna accidentally go off if it bumps against something in my bag. I’d rather have it a bit tight than deal with false alarms.

    in reply to: BareEarth Grounding Mat leaving a faint mark on my floor? #5640
    Chris Writes
    Member

    Honestly, I’d probably just throw a thin cotton cloth under it and not worry too much. Those non-slip backings can do that sometimes with certain floor finishes.

    Chris Writes
    Member

    I chuck a couple ice cubes in mine when I remember but honestly I don’t stress about it. The water alone already does enough for me sitting right next to it on my desk.

    in reply to: How do you hold the Qinux Gravizer for longer projects? #5545
    Chris Writes
    Member

    Honestly, I think you’re overthinking it a bit. I’ve used mine for way longer than that on leather and wood and it never really bothered me. Just grip it however feels natural and keep going, it’s not that heavy.

    Chris Writes
    Member

    I noticed the vibration thing at first too but now I barely even think about it. Honestly I just switched to the soft mode for a couple days and that helped me get used to it without feeling like I was gonna chip a tooth or something.

    in reply to: Guardality and passport cover – will it still work? #5032
    Chris Writes
    Member

    I just keep my Guardality card in my usual spot and don’t really think about it. The passport cover sounds like more hassle to me since I’d have to remember to actually use it.

    in reply to: How long does the iTagPro battery actually last for you? #5006
    Chris Writes
    Member

    I’ve had mine for about five months now and it’s still chugging along. I don’t really pay attention to the battery unless the app tells me it’s low, but so far so good.

    Chris Writes
    Member

    I’ve had mine plugged in for a few months now. Can’t say I’ve done a deep dive on my bill numbers, but I did notice my lights seem a bit steadier if that makes sense, no more random flickers when the AC kicks on. It’s not like it’s saving me a ton, but it’s still plugged in and I haven’t felt the need to yank it out.

    in reply to: Qinux BarkBuz for a stubborn barker? #4652
    Chris Writes
    Member

    I’ve got one and honestly it’s kind of hit or miss with really stubborn barkers, but it’s worth just seeing if the sound annoys them enough to stop. For the price it’s not a huge deal if it doesn’t work, and you can always just point it out the window and forget about it. I wouldn’t stress too much over it.

    in reply to: Battery life on Qinux Dogitek remote, does it last? #4159
    Chris Writes
    Member

    I think it really depends on what settings you run. I mostly stick to beep and vibration, and I charge mine maybe every 10 days or so, but I’m not super precise about it. I do prefer to plug it in overnight every few days just so I don’t have to think about it, but it’s never died on me mid-walk or anything.

    in reply to: Heater Pro X safe to run in a bathroom while showering? #3870
    Chris Writes
    Member

    I’ve been running mine in the bathroom for months now and honestly haven’t had any problems. You’re not exactly soaking the thing, it’s just humid air for a little while. Seems fine to me.

    Chris Writes
    Member

    I think it probably depends on what bugs you about your water. If you don’t notice a strong chlorine smell or any dryness, you might not see a huge change.

    Chris Writes
    Member

    I dunno, I kind of disagree with the idea that it’s useless unless you’re right on top of it. I have mine on a shelf nearby and it definitely makes the air feel less stale in the room.

Viewing 26 posts - 27 through 52 (of 56 total)