Alex Reed

Forum Replies Created

Viewing 30 posts - 1 through 30 (of 37 total)
  • Author
    Posts
  • in reply to: Cozy Cove Heater remote range? #17421
    Alex Reed
    Member

    Mine responds fine from bed as long as the remote is pointed roughly toward the unit. If I aim it off to the side it gets flaky, so it’s not omni-directional or anything. The wall mount is nice for keeping it off the floor though.

    in reply to: How do you split one outlet in a hostel without being a jerk? #16581
    Alex Reed
    Member

    Grabbing a free slot without saying anything is how you end up with your cable pulled out at 2am by someone who assumes it’s abandoned. I’d rather just ask the person next to me. Takes less time than posting about it.

    Alex Reed
    Member

    I mostly just look at whether the return window starts from delivery or purchase. Had one where it was 30 days from order date, so by the time it arrived I had like two weeks left. That’s the part that actually matters to me, not the number.

    Alex Reed
    Member

    I don’t bother reading the whole thing. What actually matters to me is whether the app lets me use it without connecting the tracker at all, even in a limited way. If I can poke around first and see what it does, I’m way less worried about the fine print.

    in reply to: SynGas with a rental car? #15356
    Alex Reed
    Member

    I’ve used mine on a couple of longer rentals and honestly the “learning” part wasn’t the issue for me. What got me was that the car’s own computer seemed to fight it a bit. On my personal car it settled in fine, but the rental felt sort of jerky for the first day or so, then smoothed out. Not sure if that’s the device or just the rental being a different car than I’m used to. Either way it did seem to help a little on gas, though I wasn’t tracking it closely enough to say how much. The bigger thing for me was just remembering to pull it before I turned the car in. Left it in once and had to call the rental place to get it back. So if you do try it, just set a reminder on your phone or something.

    in reply to: Does the WellHeater have a tip over shutoff? #14991
    Alex Reed
    Member

    The kill switch and tip over shutoff aren’t always the same thing on these. I’ve seen heaters where the kill switch only kicks in if the unit goes completely horizontal, so if it tips onto something soft or lands at an angle it might keep running. Not saying that’s what’s happening with the WellHeater specifically, but that could explain why some people have it cut out every time and others don’t. The angle it lands at probably matters more than people realize.

    in reply to: Do I need to adjust the Qinux Gravizer for different materials? #14326
    Alex Reed
    Member

    Swap the tip and go slower on glass.

    in reply to: Does the Qinux WarmPro pull a lot of power on high? #14320
    Alex Reed
    Member

    It pulls a decent amount on high, but that’s just how these plug-in heaters work. I ran one in my garage for a few weeks and never had an issue with the breaker. If your office is on a shared circuit with other stuff you might notice it more.

    in reply to: Enence Translator really 1.5 seconds? #12491
    Alex Reed
    Member

    Probably depends what you count. Mine reacts fast once I stop talking but the whole back and forth still feels slow in person. I got it for quick stuff like asking directions, not real conversations.

    Alex Reed
    Member

    I don’t think the 8 hour thing matters as much as people make it out to. The bigger issue is heat. I used to leave batteries plugged in overnight on another drone and the pack always felt warm in the morning, which isn’t great long term. Now I just charge while I’m awake and unplug once it’s done. For the first charge I’d say follow whatever the manual says if it gives a number, otherwise just take it off when the light changes. Leaving it overnight probably won’t kill it right away but it’s not something I’d make a habit of. Also don’t fly it down to zero on the first few flights, that seems to matter more than the initial charge time.

    Alex Reed
    Member

    Mine chewed through the moss on my patio better than the line ever did. It does leave the concrete a bit rougher looking, but I got used to that. If you’re just doing cracks it’s a solid swap.

    in reply to: Does the Qinux Vapoxis really cut down on chemical use? #11959
    Alex Reed
    Member

    I still keep one all purpose spray under the sink mostly out of habit. Steam does a lot, but my thing is I don’t like dragging the cord out for tiny jobs. If there’s a quick spill or a couple of fingerprints on the counter, grabbing a spray and a rag takes ten seconds. The Vapoxis only comes out when I’m actually planning to clean, not for random little messes. That’s the main reason I haven’t cleared out the cabinet. It’s not that the steam doesn’t work, it’s more about how I clean day to day. For bigger jobs I barely touch the sprays now though. So I’d say it depends on whether you’re a quick wipe person or a set aside time to clean person.

    Alex Reed
    Member

    I switched phones mid-year and lost a couple weeks of readings somehow. Same login and everything. Not sure if it was the app or me not syncing before wiping the old one, but it wasn’t the clean handoff people make it sound like.

    in reply to: NanoPolix on plastic trim? #11850
    Alex Reed
    Member

    I tried it on the plastic cladding on my old CR-V since I had the cloth lying around. It didn’t ruin anything, but the scuffs stayed pretty much the same. What it did do was pull some of the grime out of the texture so it looked a bit darker for a few days. Then it went back to how it was. I think if your scuffs are actual scratches in the plastic, the cloth isn’t going to do much. If they’re just marks sitting on the surface, maybe. Worth a shot since you already have it, but I wouldn’t buy one just for trim.

    in reply to: Does the ClairLite remote work through a wall? #11548
    Alex Reed
    Member

    Mine worked fine from the next room.

    in reply to: Omnihear for one-on-one chats? #11260
    Alex Reed
    Member

    Volume buttons matter more than mode switching for me. I left mine on quiet and just bumped it up a notch when the other person talks soft. That got me through most one on one stuff without touching anything else.

    Alex Reed
    Member

    Mine won’t translate at all unless the app is open on my phone. I’ve tried just tapping the glasses and talking, nothing happens. So for me at least, the phone is doing the work, not the glasses.

    Alex Reed
    Member

    Mine pairs fine with my laptop, but I wouldn’t call it seamless. Every now and then I have to go into Bluetooth settings and manually select it because it won’t auto-connect. Not a huge deal, but if you’re expecting it to just know which device you want without touching anything, you might be disappointed.

    in reply to: Clima Pest Guard near a pet bowl? #9409
    Alex Reed
    Member

    We’ve had ours running near the living room where the cat hangs out. She’ll sniff it occasionally but never stays close enough for it to be an issue. The zapping sound is more startling than anything else, and even that only happens when something actually flies into it. I figure if the dog isn’t messing with it, you’re probably fine.

    in reply to: Keilini Heater Pro noise level in a bedroom? #9114
    Alex Reed
    Member

    I actually run mine in the bedroom most nights and the dB rating checks out for the fan itself. What gets me is the clicking noise when the heating element cycles on and off. It’s not loud, but it’s a distinct tick that happens every few minutes. Took me about a week to stop noticing it, but my partner still wakes up sometimes.

    The fan noise blends into background pretty well honestly. It’s more of a low hum than a whoosh. The cycling click is the real variable for light sleepers. If you’re the type who notices a clock ticking across the room, that might get to you more than the airflow sound. I’d say keep the timer on and let it shut off after an hour or two instead of running it all night. That way you get the warmth while falling asleep without dealing with the intermittent clicks during deep sleep.

    Alex Reed
    Member

    I have the opposite experience with mine. The spray stays pretty consistent and even when I do windows, but I only use it at the lower pressure setting. Felt like the higher setting was where it wanted to wander a bit more. Never had an issue with it turning into a splatter show.

    in reply to: Does the ChirpyCharm need direct sunlight for the solar panel? #8929
    Alex Reed
    Member

    I’d say expect some USB charging if your yard stays shady most of the day.

    Alex Reed
    Member

    I had mine wedged between the TV stand and a stack of old books for a month and never moved it. I figured if it was truly blocked I’d find out by seeing zero change. The ants that used to come in by the back door did taper off, so something was getting through. I think the couch or bookshelf being in the way matters less than people think, the unit is sending sound out into the room, not just straight ahead. If you’re seeing a difference in activity, I’d leave everything where it is. If absolutely nothing changes after a few weeks, then maybe try a different outlet. But I wouldn’t rearrange furniture just for this.

    in reply to: Does the Vanotium really stay odor-free after garlic or fish? #8034
    Alex Reed
    Member

    I’ve had mine for about four months now and I’m on the opposite side of this. I’ve chopped raw garlic, shallots, and even some marinated shrimp on it and never noticed anything after a regular rinse with soapy water. I don’t scrub it crazy or use any special cleaner either. Just a normal wash and let it air dry on the rack.

    I do wonder if the people getting smells are leaving food sitting on it for a while before cleaning. That would probably make any board hold onto something. But if you’re wiping it down right after cutting, I genuinely think there’s nothing to worry about with this one. The surface just doesn’t seem to absorb anything like wood or plastic does.

    I’m not saying your nose is lying, but mine has been fine with some pretty pungent stuff so far.

    in reply to: Does the Qinux BlastVul work fine with a bucket? #7893
    Alex Reed
    Member

    I get why people like the bucket idea, but I wouldn’t count on it for a full car wash. The suction is fine, but if the bucket gets low, you start sucking air and it sputters. You have to keep topping it off constantly, which gets old fast.

    in reply to: Does the SawShark work on all chain sizes or just some? #7514
    Alex Reed
    Member

    The fit is the thing to check, not the brand. I picked one up assuming it would handle everything and found out my little trimmer chain was too small for the guide. It’s a solid tool for the common sizes, but if you run anything unusual, measure the pitch and gauge first.

    in reply to: Enence Translator battery life when traveling? #7299
    Alex Reed
    Member

    I’d skip the power bank and just charge it during lunch.

    in reply to: Does the Melara Air sit too high for stomach sleepers? #7213
    Alex Reed
    Member

    I rotated between the Melara Air and my old flat pillow for a couple nights and that helped me figure out the height difference. Eventually I just got used to it, but if it’s still bothering you after another week, it might not be worth forcing.

    in reply to: TopCarPlay and phone battery drain – anyone notice anything? #6614
    Alex Reed
    Member

    Mine doesn’t seem any worse than when I used a cable, honestly. Wireless is always going to use a bit more juice, but it’s not something I’ve ever had to think about during my commute. I’d say don’t worry about it unless you’re seeing something really drastic.

    Alex Reed
    Member

    I was in the same boat before getting mine. I figured the body fat numbers would just be random guesses that made me feel bad about myself for no reason. Turns out, the app does make the trends pretty easy to read. You pick a metric and it shows you a line graph over weeks or months, so you can actually see if something is moving in the right direction or just bouncing around.

    What I found is that the absolute numbers are whatever, but the direction matters. Like, if I weigh myself at the same time in the morning, the fat percentage trend is pretty consistent even if the daily number wobbles a bit. It was never about the exact reading for me, more about seeing if my slow changes were actually doing anything.

    The one thing I would say is that you have to be patient. A week of data is basically noise. After a month you start to see something real. I also stopped caring about the smaller metrics like protein mass or whatever, but the main ones like body fat and muscle mass are fine for keeping me honest.

    Not a gimmick, but also not something I would base any medical decisions on. If you just want a better picture of where you are heading, it does the job.

Viewing 30 posts - 1 through 30 (of 37 total)