Forum Replies Created
-
Posts
-
I have the same concern with mine. Pulling the pin with bare hands is fine, but with thick winter gloves it’s a bit awkward, mostly because you lose the feeling in your fingertips. The pin itself is a decent size, but it’s more about getting a solid grip than the pin being tiny. When I’m walking in cold weather I usually keep it clipped somewhere I can reach with my fingers rather than fumbling through a pocket. That seems to help more than the pin design itself. If you’re mostly worried about thick gloves, it’s doable but not effortless in my experience.
I’d just keep an eye on it for a week or so and see if the sound changes. Mine had a soft click at first too, but it went away after a bit of use, so I never did anything about it.
Mine sits on a side table and has been fine for months. The wall option seems more about saving space than anything else, since it’s so light it doesn’t really need anchoring.
Mine sits next to a laptop stand and a few loose pages and I’ve kept it maybe a foot away from anything flammable. It’s the cable and plug area I’d keep clear rather than the paper itself. If you’re leaving it on all day, just make sure nothing can fall onto the front of it.
A button press alone is not going to get you recording straight out of the box. I set mine up once when I got it, and the way it works is that the camera boots into whatever mode it was in when you turned it off. So if you leave it in video mode, the top button starts recording, no phone needed. But that first time you have to go into the app and actually switch it over, because mine kept booting into photo mode until I did. That was the annoying part for me, not the recording itself. After that setup though it has been fine. I ride with mine on a chest mount and I never pull my phone out on the trail. Just press and go. The thing I did learn the hard way is that if the battery dies mid ride it comes back on in photo mode again, so I lost a whole descent of footage before I noticed. So yeah, the button does the job, but you do need the app once to get it pointed the right direction. It is not a press and forget situation until you have done that.
Not sure the offline thing is as vague as you’re making it. It’s on the box that only some languages work without a connection. I mostly use it online anyway since that’s where the full list lives.
Mine pulled enough power off the TV port for basic streaming, but the second I tried screen mirroring it froze up. Switched to a spare phone charger and it’s been solid since. If you’re only doing apps you’re probably fine, but mirroring seemed to push it.
For me it came down to how I felt right after the ping. When a reminder made me think “oh right, that’s useful” I kept it. When I felt a little jolt of guilt or dread before I even opened the app, that one got cut. I ended up turning off maybe half of them over a couple weeks and the app still does its job. I think the trick is that it’s usually a handful of specific notifications causing the stress, not the whole system. Mine were the ones bugging me about streaks and goals I hadn’t set myself.
Mine came out of the box angled slightly up too. I ended up just loosening the bracket screw a hair and nudging the whole unit down a touch, then tightening it back. Took like two minutes and didn’t need to take anything apart.
I’d probably just wait for a slot to open and then grab it, no announcement needed. If someone’s stuff is clearly charging I’m not touching it, but an empty socket is fair game. Two nights is short enough that hovering for a bit beats making it a whole thing.
I also came from a really cheap basic head, and the main thing I noticed was the pressure. My old one was fine but kind of weak, and this one actually kept decent flow while still feeling a little softer. That part surprised me more than any filtration claim. I didn’t really think about the water itself much after the first week or so, but the shower overall just feels a bit nicer to stand under. Whether that’s the filter or just having a better head, I couldn’t tell you. For the price it didn’t feel like a waste, but I also wouldn’t say it’s some huge life change. It’s a showerhead that works and doesn’t feel cheap, which is honestly all I was after.
A week is usually my cutoff for anything like this. I tried a different ergonomic pillow last year and gave it about 8 or 9 nights. By then I either stop noticing the shape or I don’t, and that was enough to know. If it still feels off after that, it’s probably not going to suddenly click on night 12.
The neck thing you’re describing sounds normal though. Mine felt strange for the first several nights, just an unfamiliar shape under my head. Not sore, just odd. I kept waking up half aware of it, which made me think it wasn’t working, but that’s more about your body adjusting than the pillow failing.
What I’d actually pay attention to is the morning after, not how it feels when you lie down. If you’re waking up with the same tension you had before, that’s a sign. If the mornings are roughly the same, give it a few more nights. If they’re worse, I’d stop.
Mine still seems to help even when the fridge is packed, though I keep it in the door bin where nothing really blocks it. I mostly notice that the smell after reheating fish doesn’t linger overnight anymore. That alone makes it worth leaving in there for me.
I get why people say skip it, but I actually noticed a difference with mine. It mostly cut down the echo in the room, so the street noise felt less harsh even if it wasn’t quieter. Not a fix, but it wasn’t useless either.
I’ve only used mine on the grout in the kitchen and it pulled up a decent amount of gunk I couldn’t get with a rag. As for the germ thing, I don’t really care either way, I just like that I’m not breathing in bleach fumes all afternoon.
I got a cheap inline USB meter just to see what mine pulls and it was drawing way less than I expected, so a basic power bank handled it no problem. Mine runs about six or seven hours on a 10k bank with the fan on low.
I’ve had mine a few months and the side view is genuinely fine. My kid sits almost parallel to the screen on the floor and still watches without complaining. What gets you is a bright room, not the angle.
I had the same concern before getting mine, and the remote is pretty small and slim, so it can definitely disappear if you just leave it on a nightstand. What worked for me is using the wall mount hooks that came with it. I stuck the fan on the wall near my desk and just keep the remote sitting right on top of the base when I’m not using it. The top is flat enough that it doesn’t slide off. It’s not like there’s a dedicated slot or magnet for it, but as long as you pick a regular spot and stick to it, it’s fine. The buttons are also pretty basic, so you could honestly just use the controls on the fan itself if the remote goes missing. I mainly use the remote for speed changes from the couch, but it’s not a dealbreaker if it vanishes.
I mostly use mine for work calls and I don’t bother with the two-way mode for that. My colleague just talks on their end like a normal call and it works fine. For travel chats though I’d rather hand over a bud than make someone download an app.
The Flixy remote is fine for basic navigation. It’s not as snappy as my old Roku one, but I’ve never had it straight up freeze on me either. If you’re just picking shows and scrolling around, it does the job without much fuss.
I just use the JetClean on the glass after I finish the body, while everything is still wet. It knocks the soap off fast and I haven’t scratched anything. For a normal bucket wash though, I’d still grab the hose.
Low pressure is exactly the problem. Mine works fine on my driveway because I’ve got decent flow, but I tried it at my parents’ house and it was basically a fancy squirt gun. You’re not missing anything, it just needs real pressure to do anything.
Moving it around does help sometimes but it’s hit or miss for me. I got a couple extra channels by my window but lost one I had before, so it’s kind of a tradeoff. Not really a waste of time if you’re just trying to grab a few more.
Mine stays in the same slot as my contactless cards and it’s been that way for months. Still works fine, no issues with tapping or anything. I don’t think it needs its own separate spot.
I’d skip it if your trimmer is bump feed only. Most of those wire heads need you to pull the whole spool housing off and bolt the plate straight to the shaft, and a lot of bump heads don’t have that setup. I’d just run regular line and not deal with swapping machines over a weed eater head.
I’ve had mine for about a year and the only gas it’s ever flagged was from a stuck burner knob, nothing else. So the natural gas and propane detection does work, but it’s not like it’s sniffing out every little thing in the kitchen. If that’s the main reason you’re buying it, I’d probably look at a dedicated gas alarm instead.
