Forum Replies Created
-
AuthorPosts
-
2 de November de 2026 at 14:32 in reply to: Breezi AC water tank, how often do you actually empty it? #18069
RonWeek
MemberDumping it daily sounds like more effort than it’s worth for a little desk cooler. I usually just tip whatever’s left into a plant and let the tank air out overnight, which keeps things from getting funky without a full wash every time.
22 de October de 2026 at 01:24 in reply to: Does a simple wooden box with a vent work for battery charging in a shed? #17064RonWeek
MemberA small vent plus a shelf keeps things from sitting in the damp, that part works.
RonWeek
MemberMine came with a little card in the box that had the offline languages printed on it, which I only found after digging around in the packaging again. It’s a short list, so I just keep it in the case and glance at it before I head out somewhere without signal. Nothing hidden in the settings as far as I could tell.
18 de October de 2026 at 08:48 in reply to: How do you set up a simple at-home test for a wellness device vs placebo? #16444RonWeek
MemberI’d probably just set a phone reminder to flip the mode at random-ish times and not look at the device when I do it, then forget about it. Not perfect, but way less fuss than trying to build some rig. My track record with not peeking is pretty bad though.
17 de October de 2026 at 17:16 in reply to: Does the iTagPro app show the last spot automatically? #16337RonWeek
MemberMine has kept the last spot saved without me doing anything extra, but it isn’t always the exact spot I’d expect. When I parked in a big lot and walked away, the pin was more like where my phone and the tag last had a connection, not where I actually left the bag. It was still close enough to find the right area though. I think the app just remembers that automatically once you’ve paired it, so you don’t need to set up anything special for the basic last location. I mostly like it for the convenience of not having to remember where I put something, and the app does that part fine for me.
13 de October de 2026 at 12:01 in reply to: Do you rotate scent games by smell or just by toy? #15662RonWeek
MemberI just rotate the hiding spots, not the scent.
12 de October de 2026 at 07:14 in reply to: Do battery adapters actually make sense for mixing brands? #15469RonWeek
MemberI have one adapter that lets me run a little detail sander off a battery from a different brand. For occasional weekend stuff it has been totally fine. I think the main thing people miss is that it is more about the physical fit and whether the tool feels balanced with a bigger pack hanging off it. Mine is a bit awkward to hold now but not enough to bother me. I have used it maybe a dozen times over the past year and nothing weird has happened with the battery. It does not feel like a permanent setup though, more like something I keep in a drawer for when I need that one tool. For light home use I would say it is worth trying as long as you are not expecting it to feel like the original battery.
10 de October de 2026 at 01:40 in reply to: How long does it take for a cat to adjust to a new apartment? #15124RonWeek
MemberI actually don’t think the hiding is the main thing to focus on. Mine adjusted to the new place way faster once I put her in one small room with her own stuff instead of giving her the whole apartment right away. The whole place seemed to overwhelm her more than the actual move did.
8 de October de 2026 at 11:23 in reply to: Does the Vital Shoulder Massager work on both shoulders at once? #14886RonWeek
MemberI actually disagree with the whole “just alternate sides” thing. I’ve been using mine on each shoulder back to back for about a month and it’s been fine, the strap adjusts enough that it doesn’t feel awkward. Slightly more fiddling than one side, but not a hassle.
RonWeek
MemberThe offline part is the main reason I even bothered with these. I don’t need it to handle every language, just the two I actually use, and it’s been fine for that. Not going to pretend I’ve stress tested it, but it does what I need when I’m out of range.
2 de October de 2026 at 22:01 in reply to: Does Glokore Filtered Showerhead help with that weird chlorine smell? #14035RonWeek
MemberI grabbed one of these a couple months back mostly because I wanted to stop hauling bottled water into the bathroom for rinsing my hair, and the chlorine thing was part of it too. The smell in my place wasn’t constant, more like it showed up some days and not others, which made it annoying to judge at first. After swapping the head on, the pool smell basically went away for me. Not completely gone every single time, but I stopped noticing it, and that’s really what I cared about. What surprised me was that the water felt a little less harsh on my skin, which I wasn’t even expecting. It’s not some magic fix for everything, but for the smell specifically it did the job in my case. Only thing is you do have to remember to swap the cartridge eventually, and I’m bad about that kind of stuff.
2 de October de 2026 at 07:07 in reply to: Does iTagPro actually work for finding your phone? #13940RonWeek
MemberA lot of people here seem to treat the phone-finding thing as this half-useful gimmick, but I actually think that side is underrated if you use it right. The trick is that it’s not really meant to replace anything for a phone that’s totally lost somewhere random. It’s more for when you set the phone down somewhere silly and you’re already in the house. From what I’ve seen, it just makes the phone play a sound through the app, so it’s basically a remote chime. That worked fine in my case for finding it under a pile of laundry once. If you’re expecting it to point you to a location on a map or work when the phone’s been off for hours, that’s not really the point of the feature. For putting a tag on your keys and using it to ring the phone when you’re nearby, it’s handy.
RonWeek
MemberI think the trick is doing it while the paint is still cool to the touch. I did a small scuff on my rear quarter panel after it had been sitting out all morning and the cloth just kind of skipped across the surface instead of grabbing. Went back out later that evening when things had cooled down and it behaved way better. So if you’re planning to do it right after driving or in the afternoon sun, maybe just wait it out. As far as prep, a basic wipe down is fine, but what surprised me was how much a bit of water spray helped the cloth glide instead of dragging. Not soaking it, just a light mist. That made the whole thing less of a chore for me, especially on curved panels where you’re moving your hand around a lot.
29 de September de 2026 at 12:40 in reply to: Glokore Therapy Mask for dark spots? does it actually help #13505RonWeek
MemberMine lives on my nightstand, super easy to grab.
RonWeek
MemberThe thing I’d check is whether the app works without making an account. Some of these free ones still want your email and then you’re getting promo mail every other week, which is its own kind of annoying.
24 de September de 2026 at 13:39 in reply to: Qinux WarmPro – safe to leave plugged in overnight? #12708RonWeek
MemberAlright, I’ll just leave it plugged in then.
24 de September de 2026 at 08:17 in reply to: Qinux Gravizer vs old plug-in engraver for tiny details? #12672RonWeek
MemberI picked up a small cordless engraver last year mostly because my old plug-in one was a hassle to pull out for quick stuff. Mine isn’t the Qinux, just some generic rechargeable pen, but the cordless part genuinely made me use it more. The old one lived in a drawer with the cord wrapped around it and I’d skip little jobs just because getting it out felt like a chore. With the pen I can grab it, do a few letters on a wooden spoon or a little name on a gift box, and toss it back. That part alone was worth it for me.
On the fine lines thing, I’ll be straight with you, the cordless pen didn’t magically make my lines cleaner. What changed was I could hold it at a better angle without fighting a cord dragging across the table, and I could rotate the piece easier. My initials came out noticeably less shaky after a couple of tries. Still took practice though, my first attempt looked like a kid scratched it in with a nail.
For simple gifts and no heavy work, I think the switch is fine. It’s not going to feel like a big upgrade in power, more in how often you actually bother to use it. If your main gripe is detail work and not the cord, then the cordless bit might not fix much. But if dragging the old thing out is half the reason you avoid small jobs, that’s where it helps.
23 de September de 2026 at 15:23 in reply to: MixMate self-cleaning cycle: does it really get all the residue out? #12560RonWeek
MemberI mostly use mine for matcha and greens powders, and the self-clean cycle does the job on the bottom where stuff actually settles. I fill it with warm water and a drop of soap, run it, then dump and rinse. The part that gets me is the lid. There’s a little crevice around the seal where powder collects and the cycle doesn’t really touch that, so I end up pulling the lid apart and rinsing it by hand anyway. Takes like ten seconds though, so it’s not a dealbreaker for me. The mug itself comes out clean enough that I don’t scrub it. If the lid is what bugs you, that’s the one spot to keep an eye on. Otherwise it’s about as low effort as it sounds.
23 de September de 2026 at 15:17 in reply to: Keilini Heater Pro: does the rotating plug stay tight? #12559RonWeek
MemberMine’s stayed snug on the kitchen outlet for weeks.
23 de September de 2026 at 04:11 in reply to: Flixy vs old Roku stick, is the remote lag annoying? #12475RonWeek
MemberThe lag on mine is mostly tied to the Wi-Fi in that room. When I moved the stick to the living room TV closer to the router, the remote felt normal again. So it might not be the remote itself.
RonWeek
MemberI moved mine to the bedroom last week and it’s been fine. The lower speeds blend into the background enough that I stopped noticing it after a night or two. It does make some noise, just nothing that kept me up.
20 de September de 2026 at 09:38 in reply to: Qinux VultrioX wire brush head – anyone use it for moss on concrete? #12037RonWeek
MemberIf I had that moss problem on a driveway I’d just grab the wire head and be done with it instead of fighting with line. I used mine on a brick walkway last month and it took the moss down to the surface without much fuss. It does leave the bricks looking a bit scuffed after, so keep that in mind if the concrete finish matters to you.
19 de September de 2026 at 11:39 in reply to: Does the Glokore Therapy Mask need to be plugged in while wearing it? #11885RonWeek
MemberI got one of these a few months back and the power setup confused me too at first. Mine came with a little rechargeable controller puck that the mask plugs into, so it’s not truly wireless in the sense of having no wires at all. You charge the controller separately, then when you wear the mask there’s a short cord running from the mask down to the controller. I usually just stick the controller in my pocket or clip it somewhere and it’s fine.
I will say the battery on the controller isn’t endless. I get maybe a handful of sessions before I need to plug the controller itself into a charger, but during an actual session you’re not tethered to a wall outlet. So you can walk around the house doing stuff while wearing it, you just have that small controller hanging off you somewhere. Storing it is easy since everything folds up small. That’s honestly the part I care about most since my bathroom counter is already crowded.
RonWeek
MemberI usually stick mine in the bathroom when I sleep since I need actual silence in the bedroom. The unit itself is fine, it’s just that any little motor hum gets under my skin once I’m trying to drift off.
13 de September de 2026 at 07:06 in reply to: Qinux BitBip 89 – can I add my own games easily? #10911RonWeek
MemberI poked around the folders on mine one weekend and it wasn’t too bad, though I just copied a couple of old favorites over and left the rest alone. It worked fine for me, but I only tried it the once and haven’t messed with it since.
RonWeek
MemberI’ve had better luck judging it by how the surface looks rather than counting seconds. When it starts to go from that wet shiny spray look to a slightly hazy film, that’s usually my cue to grab the microfiber. If I wait until it looks totally chalky, it turns into more of a rubbing job than a buffing job. One thing that helped me was doing it in the shade instead of direct sun. In the sun it seemed to flash off way faster and got sticky before I even got to it. In the garage I could take my time a bit more and it wiped off cleaner. The 3 minute thing is probably just a rough guide for average conditions. Also I noticed a little goes a long way, I was overspraying at first and that just made more residue to deal with.
RonWeek
MemberI have the DappSmile and used a cheap metal pick before that. The biggest difference for me is actually the storage and charging side of it, since the little case keeps everything together in a drawer instead of losing tips everywhere. Cleaning wise it does fine for the stuff I can see, but I still book a real cleaning once a year anyway.
9 de September de 2026 at 19:38 in reply to: PolorVision glasses case or pouch included or do I need to find my own? #10371RonWeek
MemberGuess I’ll just grab a cheap sunglass pouch for mine then.
9 de September de 2026 at 02:22 in reply to: Matsato care routine – do you treat it like a regular knife? #10244RonWeek
MemberThe handle is the part that changes things, not the steel. I keep mine out of the sink entirely and just wipe it down after a wash, which is easy enough if you already hand dry your knives.
7 de September de 2026 at 05:35 in reply to: SpyFocus battery okay if left on motion detect all day? #9946RonWeek
MemberMotion detect definitely eats more than idle, but I wouldn’t say it forces a nightly charge unless your place is busy. I had mine running near my workbench over a weekend and it lasted until Monday evening before I bothered plugging it in. If you’re getting constant triggers, expect the lower end, but a couple days is realistic.
-
AuthorPosts
