Noah Kent

Forum Replies Created

Viewing 30 posts - 31 through 60 (of 84 total)
  • Author
    Posts
  • in reply to: SleepZee for side sleepers, anyone tried it? #8865
    Noah KentNoah Kent
    Member

    The slipping out thing I would not stress about, honestly. Mine has stayed put fine even when I toss around, and I move a lot. The jaw pressure is the part that took me a few nights to get used to, but it never felt like it was shoving things out of place.

    in reply to: Matsato balance when cutting? #8521
    Noah KentNoah Kent
    Member

    Mine is the opposite, honestly. I picked one up about two weeks ago and it feels like the blade does most of the work. I actually found myself adjusting my grip a few times because I was getting a bit of wrist fatigue, which I didn’t expect from something marketed as balanced. The handle doesn’t feel heavy to me at all. I’ve seen some folks mention the finger hole throws off the weight, but I don’t use it much anyway. I just hold it like a normal knife. Maybe it’s a batch thing or maybe it depends on the angle you grip it at, but I wouldn’t say handle-heavy is the norm based on my experience. It’s a fine knife for everyday stuff, but if you’re sensitive to balance, it might be worth handling one in a store before committing.

    in reply to: Does the Vanotium really stay odor-free after garlic or fish? #8015
    Noah KentNoah Kent
    Member

    That lingering smell thing is actually what I was most curious about before buying mine too. I had read all the marketing stuff about it being odor resistant, but I figured that was just typical product hype.

    So my personal test came a couple weekends ago. I made a big batch of salmon and chopped a ton of fresh dill and lemon on it. Normally with my old plastic board, I swear the dill smell would hang around for days no matter how many times I scrubbed it. With the Vanotium, I rinsed it off right after and honestly forgot about it until the next morning. I went to grab it to cut some bread for breakfast and put my nose right on the surface just to check. Nothing. Like literally nothing. I was actually kind of shocked.

    The garlic thing though, that’s a bit different for me. I don’t notice it on the board itself after washing, but I do catch a faint whiff when I first pull it out of the drying rack if I chopped a lot of garlic the night before. It’s not the board smelling bad, more like that last little bit of aroma that lingers in the air or on my hands and transfers. Once it’s fully dry, it’s gone.

    So I guess my answer is yes, it does stay pretty odor free, but I wouldn’t say it’s magic. It’s way better than anything else I’ve used, but if you chop like half a bulb of garlic, give it a proper wash and let it dry completely before you judge it.

    Noah KentNoah Kent
    Member

    I’d say it does make a difference, but not in the way people expect. We have pretty hard water and the showerhead itself stays way cleaner than my old one used to. The glass door still gets spots if I don’t wipe it, so it’s not magic, but there’s less crusty buildup on the actual head and the water feels softer on my skin. I think that’s the real win.

    in reply to: Does the Qinux BreezaMax really work well for a small bedroom? #7859
    Noah KentNoah Kent
    Member

    I’ll be honest, I nearly didn’t buy it because I kept reading that it was more of a personal fan than a room fan. I was worried it would just blow air right in my face and nowhere else. I’ve had it for about a month now and my opinion has shifted a bit.

    My bedroom is around the same size, maybe a touch smaller, and I mainly got it for the same reason as you: those warm nights where you just want some movement in the air. At first I kept it on high because I thought that was the only way it would do anything. That was actually too much for me, it felt like a constant draft. I dropped it to medium and that was the sweet spot for me. It’s not a strong breeze that pins you to the bed, but you can feel it across the room, especially if you have it oscillating. It’s more like a consistent background airflow that stops the room from feeling stuffy.

    The quiet part is the thing that changed my mind the most. I was expecting some hum even on low, but it’s barely there. I can sleep with it on without needing earplugs or anything. So I guess I went from thinking it might be too weak to realizing I didn’t need as much power as I thought. For a small room it does the job, just don’t expect it to replace an AC unit.

    in reply to: Does the Black Falcon Drone need a phone for the camera to work? #7724
    Noah KentNoah Kent
    Member

    I think people make the phone thing sound like a bigger deal than it is. If you grab the drone just to mess around and check the footage later, you can skip the app entirely. The camera still records to the card, so you’re not losing anything except the live view. Only reason I’d say the phone is a must is if you actually want to frame shots properly or see where you’re flying in tight spots.

    in reply to: FitiBeats touch controls – do they ever get less finicky? #6821
    Noah KentNoah Kent
    Member

    I think it really depends on how you hold them when you put them in. I’ve had mine for a few weeks and the controls are still twitchy if my fingers brush the top half, but I’ve just gotten into the habit of only touching the stem. Once I stopped messing with the actual bud, it stopped being a problem for me.

    Noah KentNoah Kent
    Member

    I’ve been thinking about grabbing one for my own garage too, so I’m curious how this thread goes. The layout in mine is kind of broken up with shelves and stored stuff, so even if the soundwaves work in the cold, I’m not sure they’d reach the corners where the mice actually come in. I’d probably just pick one up and see, but I wouldn’t expect it to be a one-and-done fix. Seems like something you’d need to position carefully, maybe even move around a few times before it does anything. That’s my main hesitation. I’d rather know that before spending the money.

    in reply to: Glokore Therapy Mask vs old red light panel, anyone switch? #6666
    Noah KentNoah Kent
    Member

    I’d probably stick with the mask just because I can actually do other stuff while it runs. The panel might hit more surface area, but if I have to sit still for 20 minutes, I’m way more likely to skip it. That alone probably makes the mask worth it for me, even if results take a little longer to show.

    in reply to: Does SynGas need a specific type of OBD2 port? #6654
    Noah KentNoah Kent
    Member

    I’m on the older side too, mine’s a 2010, and the port’s been the same shape on every car I’ve owned since the early 2000s. SynGas just clicks into that standard slot, so I’d say the year is pretty irrelevant for this kind of device. It’s more about the car actually having the port than which version of it you’ve got.

    Noah KentNoah Kent
    Member

    I figure the cloth itself is probably fine for a long time, the bigger question is whether it gets loaded up with stuff from the paint it pulls off. I’d say give it a rinse under warm water every so often and that probably keeps it working longer than just dry rubbing it forever.

    Noah KentNoah Kent
    Member

    I haven’t tried them myself, but I’ve seen a bunch of people say they’re fine for long wear. If they’re really that lightweight, seems like it would be more about the fit than the weight.

    in reply to: Qinux BreezaMax vs old desk fan for noise at night? #5931
    Noah KentNoah Kent
    Member

    I’ve been using mine on low mostly and it’s quiet enough that I forget it’s on, but medium does have a bit of a hum. Still way less annoying than my old blade fan, and I don’t mind it for sleeping.

    in reply to: Clima Pest Guard battery life actually 14 hours? #5779
    Noah KentNoah Kent
    Member

    I’m still on the fence about getting one, but the battery talk is helpful. Do you have to run it on the brightest setting all the time or can you dial it back to stretch the charge?

    in reply to: BareEarth Grounding Mat leaving a faint mark on my floor? #5596
    Noah KentNoah Kent
    Member

    Huh, that’s good to know. I’ve been looking at these mats but stuff like that makes me hesitate a bit. Not that a faint mark is the end of the world, but I’d rather not have to worry about my floor if I’m spending that much. Still seems like a neat product otherwise.

    in reply to: How do you hold the Qinux Gravizer for longer projects? #5569
    Noah KentNoah Kent
    Member

    I’ve only used mine a couple times so far, so I can’t really say if you get used to it or not. I just put my elbow on the table and that helped a bit, but I wasn’t going for that long. Seems like one of those things where you just have to stop and shake your hand out every now and then.

    in reply to: Enence Translator for learning pronunciation? #5304
    Noah KentNoah Kent
    Member

    I’ve played around with the listen and repeat mode on mine a bit, and it seemed to pick up what I was saying more often than not. I wasn’t always sure if it was grading my pronunciation or just reacting to any sound, but it didn’t really matter for my purposes. I mainly just wanted to hear the phrase spoken back clearly so I could mimic it, and that part worked fine. I wouldn’t overthink it if you’re just running through a few phrases before a trip.

    in reply to: Is a mini AC enough for a small bedroom? #5236
    Noah KentNoah Kent
    Member

    I keep wondering whether these mini units actually cycle the air properly or if they just end up cooling the spot right in front of them. I’d probably want it more for humidity control than freezing cold, but I’m not sure they handle that well either.

    in reply to: Does the SleepZee actually help with mouth breathing? #5152
    Noah KentNoah Kent
    Member

    The vents are fine, not really something I’d stress over. If your mouth falls open, they probably help a bit, but I wouldn’t expect them to fully stop mouth breathing. Seems like a minor feature, not a big deal either way.

    Noah KentNoah Kent
    Member

    I get the worry, but from what I’ve seen these things are pretty gentle on power draw. I’ve run mine on and off for a few weeks now and haven’t noticed any jump in my bill, even when I forget to turn it off overnight. It’s honestly a nice bonus since it’s not like a real AC unit that sucks up juice.

    in reply to: How often do you actually take your dog for a haircut? #4796
    Noah KentNoah Kent
    Member

    I’ve been wondering the same thing with my cockapoo. I usually just go by how the fur feels around his face and paws, if it’s poking him in the eye or getting matted behind his ears I book it in. For me that tends to be around every 9 weeks or so, sometimes longer if I keep up with brushing at home.

    in reply to: TopCarPlay and audio delay in certain apps? #4637
    Noah KentNoah Kent
    Member

    I’ve only used mine for music and maps so far, so I haven’t run into that issue myself. Kind of makes sense though, video streaming over wireless is probably pushing it more than audio only. I’d still be a little curious if it’s consistent across all video apps or just some of them.

    in reply to: Does the Herz P1 Smart Scale need WiFi or just Bluetooth? #4393
    Noah KentNoah Kent
    Member

    Bluetooth is all it needs. I’ve been using mine for a couple weeks and haven’t even tried connecting it to WiFi.

    Noah KentNoah Kent
    Member

    I think a lot of these portable coolers get overhyped, but the truth is they work best in certain conditions. If your room is already humid, you’re basically just getting a fan with extra steps.

    in reply to: Quick thing about the ODIN SafeWave EMF and phone cases #4281
    Noah KentNoah Kent
    Member

    I’d think it probably works the same either way since it’s passive, but thick cases can be weird sometimes with signal stuff. I just stuck mine directly on the phone itself to skip the guesswork. Seems fine so far.

    in reply to: Qinux BlackOptic video quality in pitch black? #4189
    Noah KentNoah Kent
    Member

    Appreciate all the input, that actually helps a lot. Sounds like it’s decent enough for what I need, even if it’s not perfect. I’ll probably just grab one and see how it goes.

    in reply to: SpyFocus night vision range for a medium room? #4147
    Noah KentNoah Kent
    Member

    It’s fine for a medium room. I’ve got mine pointed at a chair from maybe 12 feet away and it’s clear enough to tell if someone is sitting there. People expecting cinema quality from a tiny camera are missing the point. Just set it up and see if it works for your couch, it probably will.

    in reply to: Battery life on Qinux Dogitek remote, does it last? #4120
    Noah KentNoah Kent
    Member

    I haven’t had mine long enough to say for sure, but so far the remote seems to hold up fine for daily use. I can go several days without charging and it’s still showing plenty of battery. Not something I’d call a hassle.

    Noah KentNoah Kent
    Member

    I dunno, I actually kind of disagree. I tried stretching mine out and after about six weeks the water just tasted kind of blah to me. Not gross, just not as crisp. So I just stuck with the four week thing after that.

    in reply to: Does the Qinux AirdrobeX really handle wool sweaters well? #3921
    Noah KentNoah Kent
    Member

    I feel like people are making wool drying sound like rocket science or something. It’s just warm air moving around, not a spin cycle. If you set it low and don’t let it run for hours I doubt you’d have much of an issue.

Viewing 30 posts - 31 through 60 (of 84 total)