Marcus Weaver

Forum Replies Created

Viewing 30 posts - 1 through 30 (of 35 total)
  • Author
    Posts
  • in reply to: Herz P1 Smart Scale battery life with regular use? #15719

    Daily scans plus the handle probably lands you around six to eight weeks between charges, give or take. The 180 days is likely for people doing a quick weigh in now and then, not a full scan every morning. If you’re okay plugging it in every month or two, it’s not a big deal.

    in reply to: Qinux Talkbuds offline mode vs old offline translator? #15540

    Offline mode on these is decent but it’s not why I keep them. I still use mine mostly with a connection since that’s where the translation actually feels smooth. For travel I’d just download the packs and treat offline as backup, not the main plan.

    in reply to: SpyFocus app on older Android phones? #15295

    I’d just look up the Android version the app needs and compare it to what your phone is running before buying anything. That’s the one thing that’ll actually tell you if it’s a no-go. If your phone’s too far behind, no amount of hoping will make it install.

    I compared my wrist tracker to a chest strap for about a month and the deep sleep numbers were pretty far apart most nights. The wrist one would show a solid deep sleep block when the strap showed barely any. I still use the wrist one since it’s comfortable, but I don’t trust the stage breakdown much anymore.

    in reply to: What low-tech enrichment actually works in a small apartment? #15078

    The thing that finally worked for mine was a bird feeder suction cupped to the outside of the window. She’ll park there for hours just watching. Doesn’t take up any floor space either, which was my whole problem.

    in reply to: Does Translattia’s offline mode actually work? #14456

    I actually don’t think the offline thing is as sketchy as this thread makes it sound. I used mine at my parents’ place out in the sticks where cell service is basically nonexistent, and it handled a whole dinner conversation with my aunt who only speaks Portuguese. No dropouts, no “please connect to the internet” nonsense. I had downloaded the pack weeks earlier, forgot I even did it, and it just worked.

    Maybe I got lucky, or maybe the languages people are trying are the problem. I only needed one, so I can’t say how it holds up across a bunch of them. But the idea that it’s pure marketing fluff doesn’t match what I saw. It’s not some tiny gimmick that dies the second you lose bars.

    I’d just try one language you actually need before writing the whole feature off. If that one works, you’re probably fine. If it doesn’t, then yeah, return it.

    in reply to: WaveMax channel scan keeps missing channels? #13969

    Rescanning never changed anything for me either.

    I don’t wear glasses either and mine have been fine on their own. The over-glasses thing is just there for people who need it, doesn’t make them weird without. I use mine mainly for glare on rainy days and they do the job.

    in reply to: Does the AlarmTag pin pull as easily as old keychain alarms? #12962

    Mine still needs a decent pull, but good to know.

    in reply to: Qinux WarmPro – safe to leave plugged in overnight? #12704

    I usually just flip the switch off on mine and leave it plugged in. The plug itself doesn’t seem to get warm or anything. I get the paranoia though, I was the same way the first week.

    in reply to: DappSmile: which tip for front teeth? #12545

    I switch mine depending on what I’m doing, not just the tooth. The pointed one I save for the back teeth where stuff builds up between them, and the flat one I only use on the front surfaces when there’s visible staining. The pointed tip on front teeth always felt like it was digging in no matter how light I went, so I stopped forcing it.

    What helped me was not going for a perfect clean in one pass. I do a few seconds per tooth, rinse, then come back if I missed something. Trying to scrape everything off in one go is what made my gums sore the first week. Now I just do a quick pass every few days and it stays manageable. The flat tip still feels a little odd on the front but I got used to it after a couple weeks.

    in reply to: Qinux PolarBreeze for bedroom noise at night? #12383

    I actually slept fine with mine on the lowest setting. It’s a soft air sound, not that whiny electronic hum some coolers make. I get that people are picky about bedroom noise, but this one never bothered me.

    Mine actually got worse when the pressure was low, not the filtering part but the whole shower experience. Water still came out and I’m sure it was getting filtered since it’s just passing through the cartridge, but the spray got so weak I stopped enjoying it. On normal days it’s fine and I like it, but during the morning rush when everyone in my building is showering at once, I honestly wish I’d kept my old head for those days. If your pressure dips a lot at peak times you might notice the same thing, not that it stops filtering but that the shower itself feels kind of sad. I still use mine though. It’s just something to expect if your building gets busy.

    in reply to: Hewelth UVClean: how often should I run the self-cleaning mode? #12180

    I just leave mine on auto and charge it maybe twice a week, no big deal. The battery thing worried me at first too but it hasn’t been an issue in practice.

    in reply to: Qinux Dogitek range: does it really hit 400m? #11653

    I haven’t tried the full 400 obviously, but mine reaches the back corner of my lot without issues and that’s about 120 feet with a woodpile and some bushes in between. Good enough for what I need. If your dog is a bolter though you might want to be closer anyway.

    in reply to: Qinux AquaSylk and low water pressure? #11347

    I actually noticed a difference with mine, but not in the direction people usually ask about. My pressure went up a bit after swapping it on, enough that I had to angle the head differently. That said, my old head was probably half clogged, so who knows.

    in reply to: Does the DashOne Pro suction mount leave marks on the windshield? #11184

    I’ve had suction mounts leave that ring on two different cars, so it’s not just the DashOne. In my case it wasn’t residue at all, it was the glass itself being slightly different under the cup, and no cleaner touched it. It didn’t get worse over time though.

    in reply to: Qinux Pixgo 4K waterproof case question #11066

    I’d just grab whichever listing shows the case in the photos, otherwise you’re rolling the dice. Mine came with one but I’ve seen the same camera sold without it too.

    in reply to: SawShark vs old file guide, anyone compared? #10997

    I’d stick with the old guide unless the fiddling really gets to you. I borrowed a SawShark for a weekend and went back to my file guide after, mostly because I already know where my angles end up. Not saying it’s bad, just didn’t change much for me.

    in reply to: JetClean vs old hose nozzle for car washing? #10780

    I made the switch last summer and the difference is definitely real. The stream actually digs into the dirt instead of just pushing water around like my old nozzle did. For basic mud and road grime it saves me a ton of scrubbing time.

    in reply to: Qinux BarkBuz battery life after a few weeks? #10423

    Mine goes about a week if it’s just sitting in the living room, but once we’re outside with the dogs running around it drops way faster. I’d probably just charge it every few days on a schedule instead of waiting for it to die.

    in reply to: Do you use the Glokore Therapy Mask before or after skincare? #10131

    Your routine sounds fine honestly. I think the main thing is that the mask needs to sit on clean skin so the light can actually penetrate instead of bouncing off a bunch of product layers.

    I tried the whole serum-first thing once because I read about it somewhere, and I honestly couldn’t tell a difference. Maybe it helped the serum absorb better from the warmth or whatever, but I wasn’t seeing any major change in how my skin felt afterward. So I just went back to bare skin after cleansing because it’s simpler.

    The only thing I’d say is don’t pile on anything heavy before the mask. That just feels like it’s blocking the light for no reason. Doing serum and moisturizer after makes way more sense to me since your skin is probably a bit warm and open to absorbing stuff anyway. You’re not missing out on results.

    in reply to: Does the Qinux Klampero work on older chains or just new ones? #9665

    I think the condition matters more than the age. I’ve got one chain that’s maybe 5 years old but I’ve always kept it clean and it sharpens up real quick. Another one that’s only a year old but got dragged through some dirt and it takes noticeably longer. As long as the teeth aren’t bent or chipped, you should be fine, just expect to spend a bit more time on the rough ones.

    in reply to: Does Qinux AquaSylk remove the chlorine smell or just reduce it? #9618

    I get that smell concern because it’s the main reason I looked into this too. In my case it didn’t just tone it down, the chlorine smell basically vanished after the first couple of showers. I was actually surprised since I figured it would be one of those subtle changes you barely notice.

    in reply to: Wood Ranger Power Leaf Blower okay for cleaning out a garage? #9442

    I think for blowing dust and light junk out of a garage it’s honestly fine. The variable speed trigger helps you ease into it so you’re not just scattering everything everywhere. Just don’t expect it to shove a pile of soaked leaves across a driveway.

    in reply to: Clima Pest Guard near a pet bowl? #9440

    Mine sits on the counter above her water bowl and she sleeps right under it every night.

    I’ve used mine on the living room windows a few times and it’s been fine for the most part. The spray pattern holds up pretty well as long as I keep the nozzle moving at a steady pace. It’s not like a laser beam or anything, but it’s definitely more controlled than just splashing water around with a regular hose.

    The one thing I noticed is that the very top edge of the glass can get a bit more misty than the rest. Not dripping or running down the pane, just a fine spray that settles there. I figured out it’s because I tend to angle the wand slightly upward without realizing it. When I keep it level, it’s pretty even across the whole window.

    I also use it on the balcony glass panels and that’s where it actually shines. The lower pressure setting is plenty for that, and I don’t end up with water bouncing back at me or spraying sideways onto the floor. I think the mess factor mostly comes down to how you hold it and how far away you are. I keep it maybe a foot or so from the surface and it does what it’s supposed to do.

    I wouldn’t call it perfect, but I also wouldn’t say it’s messy. You might get a little overspray if you’re not paying attention, but that’s probably true for any pressure washer. For a quick clean without dragging out a bucket and squeegee, it gets the job done without making a huge puddle everywhere.

    in reply to: SleepZee for side sleepers, anyone tried it? #8836

    Jaw weirdness is kind of a given with these things, honestly. The first couple nights felt like my bite was off but that faded. As for slipping, mine stayed put all night and I move plenty. I’d say the bigger question is whether you can handle the feeling of it in your mouth at all.

    in reply to: TopCarPlay reconnects fine but does it ever forget your phone? #8706

    Honestly I’ve had the opposite experience. Mine has never missed a connect since I set it up, even after the car sits for a week. Sounds like yours might have a quirk or maybe a weak moment with the car’s USB port.

    in reply to: ClairLite vs my old plug-in timer, anyone else do this? #8108

    The price difference is pretty easy to justify for me. I ran mine in the living room after my dog had an accident on the rug, and just being able to set it and walk away without worrying about when to turn it off was the whole selling point. I don’t think I’d go back to the old setup.

Viewing 30 posts - 1 through 30 (of 35 total)