Marcus Olsen

Forum Replies Created

Viewing 30 posts - 1 through 30 (of 63 total)
  • Author
    Posts
  • in reply to: Does the Vanotium board stay put when chopping? #18361
    Marcus Olsen
    Member

    I’ve got it on a polished quartz counter, which I’m starting to think is half the problem. The board is light like you said, so it doesn’t take much for it to creep once I put some weight into a cut. Still not sure if it’s the surface or just me rushing.

    in reply to: Does the Vanotium board stay put when chopping? #18107
    Marcus Olsen
    Member

    Mine’s on a polished quartz counter, so yeah, smooth surface definitely seems to make it worse. I first noticed it cutting chicken and the board kept creeping toward the edge, which is fun when you’re holding a knife. I haven’t tried the corner-holding thing yet, mostly because my other hand is usually busy with whatever I’m prepping. The odd part is it only really gets shifty when I put any weight behind the blade. Light stuff like herbs or garlic, it barely moves. I’ve only had it a couple weeks though, so I’m still figuring out whether that’s just how it is on shiny counters or if I’m doing something wrong.

    in reply to: Does the Vanotium board stay put when chopping? #18037
    Marcus Olsen
    Member

    Damp is actually worse for me, it kind of skates around once there’s any moisture under there. Bone dry it mostly stays put unless I really lean into a chop. I haven’t tried the paper towel thing yet though.

    in reply to: BareEarth Grounding Mat under a rug? #17536
    Marcus Olsen
    Member

    Just a cheap thin cotton runner, nothing thick.

    in reply to: Cozy Cove Heater vs old oil radiator, which is less dry? #17534
    Marcus Olsen
    Member

    I switched from an old radiator to a ceramic one last winter and the dryness felt pretty similar to me, so I wouldn’t count on that being the fix. The ceramic warms up way quicker though, which I did appreciate on cold mornings.

    in reply to: Qinux BitBip 89 with a soundbar? #17435
    Marcus Olsen
    Member

    The only thing I’d check is whether your TV lets you pick the audio out separately from the input. Mine has a setting buried in the sound menu for that, and once it’s set the stick doesn’t touch the soundbar at all.

    in reply to: BareEarth Grounding Mat under a rug? #17290
    Marcus Olsen
    Member

    I mostly wanted it out of sight because it sits right in the middle of my desk area and the dark surface shows every bit of dust and little bits of whatever I track in. The floor around my desk is a lighter color, so the mat kind of stands out when you walk in the room. That’s really the whole reason. I wasn’t trying to hide it for any other purpose, just thought a thin rug over the top would blend it in a bit better and keep the surface from collecting stuff. After reading what you said about losing that feeling when your feet aren’t actually on it, I’m leaning toward not covering the whole thing. I might try just folding a small corner of a rug over one edge so it’s less obvious from the doorway but my feet still land on the mat where I actually sit. Still not sure though, since I don’t fully get how the grounding part works and whether having fabric over part of it matters at all.

    in reply to: Qinux WarmPro clicking sound when it turns on? #17075
    Marcus Olsen
    Member

    That click is just the internal switch doing its thing before the heat kicks in. I’ve had mine since around late fall and it does the same little snap every time I flip it on, usually a second or two before I feel anything warm. First couple of weeks I barely noticed it, then one night it was dead quiet in the room and I heard it clear as day. Nothing changed after that, it kept heating the same way, so I stopped paying attention to it. What got me was the fan spinning up right after, that’s actually louder than the click in my case. If the heat still comes through fine, that’s the part that matters to me.

    Marcus Olsen
    Member

    Mine actually didn’t behave that way. I still got the portal page on my tablet even after the router was connected, so I ended up signing in twice anyway. Phone was fine though, which was weird. Maybe it depends on the hotel.

    in reply to: Do you really need a baseline for your wellness metrics? #16815
    Marcus Olsen
    Member

    A baseline helps, but it won’t tell you why a number dipped.

    Marcus Olsen
    Member

    The stuff you already own is probably fine. Where I’d actually spend a little thought is the connector end, since camping grime and a worn plug seem to cause more trouble than the bank itself. I’ve had a cable act up just from bouncing around in a bag, not from anything fancy.

    Marcus Olsen
    Member

    I don’t think most of these things really have a hidden local mode. In my experience they’re just cloud-dependent by default and the switch is the real fallback, which is kind of annoying but not much you can do unless you go out of your way to buy different gear.

    Marcus Olsen
    Member

    I just email their support before buying and ask point blank if I can return it after using it. Whatever they write back is what I go by, since the website wording is usually vague on purpose.

    in reply to: Does StopWatt work if I only plug it in at night? #15673
    Marcus Olsen
    Member

    I don’t buy the idea that it has to stay plugged in constantly to do anything. I used mine just during the day for about two months and it behaved the same as when I left it in overnight. Unplugging it doesn’t seem to wipe out whatever it’s doing.

    in reply to: Does the Coolizi Coolzy need to stay plugged in all the time #15352
    Marcus Olsen
    Member

    Unplugging between uses is actually what I do with most of my stuff. The only thing I’d watch is the plug itself getting loose over time if you’re yanking it constantly. Mine’s only been a few weeks too so no long term verdict from me.

    in reply to: ClairLite for a closet with no outlet? #14959
    Marcus Olsen
    Member

    Portable just means you can move it, not that cords disappeared.

    in reply to: Can I use Qinux AirdrobeX without hanging clothes inside? #14908
    Marcus Olsen
    Member

    Appreciate the replies, sounds like I’ll just hang stuff in it and not fight the design. My place is small but I can make it work. Gonna grab one and see how it goes.

    Marcus Olsen
    Member

    Mine actually loosened up after a few weeks and now the battery wiggles a bit when it’s clicked in. Still works fine but I wouldn’t call it super solid. Leaving it in the handle has been fine for me though, no issues there.

    in reply to: Should AlarmTag be on my keys or bag for quick access? #14583
    Marcus Olsen
    Member

    Mine lives on a lanyard around my neck when I’m out walking the dog, which people never seem to mention as an option. It just hangs there and I can grab the pin without looking. Keys are fine but I always had a bag in the other hand anyway.

    in reply to: Black Falcon Drone: how do you know when the battery is full? #14512
    Marcus Olsen
    Member

    Mine does the same red to green thing, usually takes about 40 minutes if the battery is pretty drained. I just unplug it once it flips and it’s been fine. The manual really doesn’t say much, so the light is all you’ve got.

    in reply to: Does iTagPro actually work for finding your phone? #13924
    Marcus Olsen
    Member

    The two-way finding is the main reason I still keep one on my keys. Mine rings my phone from two rooms away without any issue, so it handles the whole “phone is somewhere in the house” thing fine. It is just a ring though, nothing fancy.

    in reply to: Does the Matsato work okay for left-handed cutting? #13632
    Marcus Olsen
    Member

    I’m left-handed and used mine for about two months before switching back to my old knife, not because of the lefty thing though. The bit that actually threw me off was the blade height. It’s a taller santoku shape, and for whatever reason I kept bumping my knuckles when I got into a rhythm chopping onions. Never had that with a regular chef knife. The finger hole itself was fine, my index finger sat in there naturally and it did give decent control for finer stuff like shallots. Handle felt okay too, nothing about it screamed right-handed to me. So I’d say the design isn’t really the problem, it’s more whether you personally click with that taller blade profile. If you’re used to santokus already you’ll probably be fine. If not, that’s the thing I’d think about more than the hole.

    Marcus Olsen
    Member

    I ran mine on a local SIM for two weeks in Portugal and it worked fine. Their plan isn’t required at all, the slot is unlocked. I never touched the app either, just popped the card in and it connected.

    Marcus Olsen
    Member

    The whole “you have to charge it fully or you’ll wreck the battery” thing is mostly leftover advice from old electronics. Modern rechargeable stuff doesn’t really work that way, and nothing about a mouthguard is going to get damaged because you tossed it in for a session at whatever charge it shipped with. If the light comes on, it’s working, and that’s kind of the end of it.

    I’d say the bigger thing is just knowing where the charge level actually is before you settle into a routine with it. That part matters more than whether the first session happens at 100 percent or 40 percent. But yeah, the idea that you need to babysit the first charge is overblown.

    in reply to: Qinux BreezaMax remote – does it need line of sight? #12969
    Marcus Olsen
    Member

    Mine actually came with two remotes, which I didn’t expect. The spare one lives in a drawer and I’ve noticed it behaves a bit differently than the one I keep on the coffee table. The drawer one sometimes needs a couple presses before the fan reacts, while the table one is usually instant. Same fan, same room, just different spots. So placement of the remote itself seems to matter as much as what’s between you and the fan. I don’t know if that’s a battery thing or just how these remotes are, but it’s the one quirk I’ve run into. Either way I just grab whichever one is closest and it works fine. Not something I ever think about now.

    in reply to: Wood Ranger Power Leaf Blower for clearing dust in a carport? #12858
    Marcus Olsen
    Member

    For a carport I think it does the job fine. I use mine on the garage floor and around the back steps, and it handles dry leaves and general grit without much fuss. Battery only lasts about 15 minutes but that’s usually enough for a quick pass.

    in reply to: Keilini Heater Pro: does the rotating plug stay tight? #12567
    Marcus Olsen
    Member

    Mine hasn’t slipped out, but it definitely doesn’t feel locked in either.

    in reply to: Does Qinux FelinStop work if it’s not in direct sun all day? #12541
    Marcus Olsen
    Member

    Morning sun is better than nothing, but I wouldn’t count on it lasting all night through the darker months. Mine handled a similar spot fine in summer and then got flaky once the days shrank. As for moving it, I just leave mine in one place.

    in reply to: Does the AerioQ work okay if I just set it on a desk? #11800
    Marcus Olsen
    Member

    Figured I’d just leave it on the desk and see how it goes instead of overthinking it. Based on what everyone said, nothing points to it being a real problem, so I’ll try that first and drill later if I feel like it.

    in reply to: WineCork Pro vs my old twist handle, is it really easier? #11143
    Marcus Olsen
    Member

    I don’t think it’s really easier, just different. My twist handle was never a problem for me, and the electric one still needs you to hold the bottle steady and line it up right. The only real win for me is less wrist work after a few bottles.

Viewing 30 posts - 1 through 30 (of 63 total)