L_Parker

Forum Replies Created

Viewing 26 posts - 1 through 26 (of 66 total)
  • Author
    Posts
  • L_ParkerL_Parker
    Member

    I’ve been running mine mostly on lower volume while working and I still don’t hit anything close to 50. Somewhere in the high 30s if I had to guess. The LCD on the case makes it easy to keep an eye on though, which is honestly the part I use most.

    in reply to: SpyFocus magnetic base strong enough for hotel walls? #11655
    L_ParkerL_Parker
    Member

    I used to think the magnet was just a gimmick and that I would end up using the adhesive pad full time. After a couple months of actually traveling with it, my view flipped. The magnet is the part I reach for first now. Not because it sticks to everything, but because it’s fast and it doesn’t leave residue behind, which matters when you’re in a room that isn’t yours.

    What changed my mind was a trip where I stuck it to the mini fridge in the room. I figured it would creep down overnight like I expected. It stayed there the whole stay, and I actually forgot it was mounted that way until I packed up. Since then I’ve used the magnet way more and the adhesive strip is still sitting in the box.

    That said, I don’t treat the magnet like it’s magic. I still give it a little nudge test before I walk away, just to see if it shifts. If it moves at all I reposition it. Takes two seconds and it’s saved me from a middle of the night crash more than once.

    The adhesive is still there if I ever need it, but at this point I doubt I’ll bother unless I end up somewhere with nothing metal in reach.

    in reply to: Qinux BreezaMax: does the remote work through walls? #11290
    L_ParkerL_Parker
    Member

    Fair enough, sounds like I just have to be in the right spot for it to register. I wasn’t expecting much range anyway, just wanted to make sure mine wasn’t acting weird. Good to know it’s just how these things go. I’ll leave it at that.

    in reply to: Does the DashOne Pro suction mount leave marks on the windshield? #11172
    L_ParkerL_Parker
    Member

    Mine never left anything, even after a year.

    L_ParkerL_Parker
    Member

    The 8 hour thing is leftover from old battery types, so I would not sit there timing it. What I did with mine was plug it in and just leave it while I set up the controller and the phone app, which took way longer than I expected anyway. By the time I had everything paired the light had already gone green.

    One thing I noticed though, the first couple of flights the battery dropped faster than I thought it would. Not like dying in two minutes, but it went from full to half quicker than later flights did. After maybe four or five charges it settled into a pretty predictable run time. So if your first flight feels short, that seems normal for these packs.

    Overnight is fine as far as I can tell. I have left mine plugged in past the green light more than once and nothing happened. Just unplug it when you remember in the morning.

    in reply to: Qinux BitBip 89 – can I add my own games easily? #10930
    L_ParkerL_Parker
    Member

    I dropped a few of my own roms on mine last month and it worked fine once I found the right folder. Not hard, just fiddly. If you can copy files to a USB stick you can do it.

    in reply to: How long should I wait before adjusting the SleepZee? #10591
    L_ParkerL_Parker
    Member

    A week is way too early to lock anything in.

    in reply to: Does the iTagPro work for luggage on a plane? #10527
    L_ParkerL_Parker
    Member

    Bluetooth only, so on the plane it won’t help much. Mine still showed up once we landed though, which was the part I actually cared about. If your bag gets lost, that last ping at the airport is better than nothing.

    in reply to: ODIN SafeWave EMF on earbud case, does it fit okay? #10495
    L_ParkerL_Parker
    Member

    They fit fine on the flat part of a case but those little rounded buds cases are mostly curve. Mine sits near the hinge where it’s flatter and hasn’t lifted, but the rest of the case is too domed for it to sit right. Pocket carry won’t kill it though.

    in reply to: AiraBreeze in a room with a ceiling fan? #10467
    L_ParkerL_Parker
    Member

    Running both just made my room feel like a wind tunnel for no real gain. I turned the ceiling fan off and the cool spot actually stayed put. If the fan’s already on for a reason, fine, but I wouldn’t add the AiraBreeze on top expecting more.

    L_ParkerL_Parker
    Member

    Mine is a few months old now and I still use it a couple times a week. Coffee stains on my front teeth are definitely less noticeable than before, but I also switched to drinking through a straw at work, so I can’t give it all the credit. It does a decent job on the surface stuff if you’re consistent with it.

    in reply to: Does SavingStars compare to the old powder I used to buy? #9000
    L_ParkerL_Parker
    Member

    The foam is just the reaction doing its job. I’ve used drain powders that sit there quietly and do nothing, and I’ve used ones that bubble up like crazy. The ones that foam are the ones that actually cleared my pipes. I’d take that as a good sign honestly.

    in reply to: does the Hewelth UVClean work with tap water or only bottled? #8722
    L_ParkerL_Parker
    Member

    Tap water is fine. I’ve been filling mine straight from the sink since I got it, both at home and at the gym. The UV part just zaps whatever is in the water, it doesn’t care if it came from a bottle or a faucet. Just don’t expect it to filter out heavy metals or anything, that’s not what it does.

    in reply to: Coolizi Coolzy noise level in heating mode? #8331
    L_ParkerL_Parker
    Member

    I’ve had mine since last winter and use it in heating mode pretty much every evening. For me the sound change is there but it’s not dramatic, more like a slightly deeper hum than the cooling. It doesn’t bother me at all, but I can see how someone picky about noise might notice it.

    in reply to: Does SynGas mess with the car’s warranty at all? #8287
    L_ParkerL_Parker
    Member

    Warranty stuff is always a gamble no matter what you plug in. I figure as long as it’s not permanently changing anything under the hood, it’s pretty low risk. If the dealer asks, it takes two seconds to unplug it before you roll in.

    in reply to: Does the Qinux BreezaMax really work well for a small bedroom? #7852
    L_ParkerL_Parker
    Member

    For a 10 square meter room, I think you’re overestimating how much air you actually need at night. I’ve got mine in a similar sized space and the medium setting is almost too much if it’s aimed directly at the bed. The low setting is what I end up using most nights, and it keeps things comfortable without that weird dead air feeling you get in smaller rooms.

    The quiet part is the real selling point though. I’ve had cheap desk fans that sounded like a small jet engine, and this thing basically disappears once you’re half asleep. The remote is handy too when you’re already lying down and don’t want to reach over.

    Only thing I’d say is don’t expect it to feel like a proper AC blast. It’s more like a consistent breeze that stops the room from feeling stuffy. For warm nights where you just want some airflow, it does the job fine. If you’re the type who needs to feel freezing cold to sleep, you’d probably want something bigger anyway, but that’s not really what this is for.

    L_ParkerL_Parker
    Member

    It’s not just you. Mine does the same thing, I’ll be moving laundry around or reaching for stuff and it piles up steps like I went for a walk. I just use it as a general guide at this point and don’t take the exact number too seriously.

    in reply to: SleepZee fit after a few weeks, does it loosen up? #7119
    L_ParkerL_Parker
    Member

    The snugness did ease up a little for me but not in a huge way. I think I just got used to how it feels rather than the material changing much. The first few weeks I noticed it every morning, now I barely think about it when I wake up.

    in reply to: Derila Ergo and pillowcases, do standard ones fit? #6985
    L_ParkerL_Parker
    Member

    Good to know I’m not the only one who just threw a regular case on it and called it a day. The empty corners look dumb but once I’m half asleep I don’t care. Might try the jersey trick if I ever remember to pick one up.

    in reply to: AerioQ remote control range issue or just me? #6670
    L_ParkerL_Parker
    Member

    Mine’s the same, but it’s never really bothered me since I’m usually right next to it anyway.

    in reply to: AerioQ timer clicks when it turns off? #6182
    L_ParkerL_Parker
    Member

    Mine does the same thing. I think it’s just the relay inside switching off, pretty standard for this kind of unit. Doesn’t bother me, and it’s been running fine for a couple months now.

    in reply to: Qinux Klampero for really small chains? #6044
    L_ParkerL_Parker
    Member

    I think people overthink this. If it clamps on and stays put while you run the file through, it’s probably fine. Worst case you return it.

    L_ParkerL_Parker
    Member

    3 or 4 days sounds about right for heat use. I usually skip the heat for a few sessions and I can easily go a week before charging. The heat definitely eats up the battery faster.

    L_ParkerL_Parker
    Member

    I tried them and I actually prefer the feel of a bigger controller for retro games. These work fine but I wouldn’t pick them as my first choice for longer sessions.

    L_ParkerL_Parker
    Member

    Honestly it’s just standard AAs. I’ve been swapping random ones from my junk drawer whenever mine dies and it’s never given me any issues. Not worth overthinking unless you’re determined to use some ancient crusty battery.

    in reply to: Is a mini AC enough for a small bedroom? #5233
    L_ParkerL_Parker
    Member

    I don’t really agree, those little units actually cool a small room fine if you set them up right. They’re not just fancy fans.

Viewing 26 posts - 1 through 26 (of 66 total)