Forum Replies Created
-
AuthorPosts
-
Tom C
MemberHeat gun does more for faded trim than any cloth.
18 de September de 2026 at 14:51 in reply to: Does the CoolJet need to be plugged in the whole time? #11742Tom C
MemberYou answered your own question when you said you move between rooms a lot. If it only runs while plugged in, that’s not portable in any useful sense. You’re just carrying a cord around looking for an outlet.
16 de September de 2026 at 14:48 in reply to: Vanotium board vs old plastic one for raw chicken? #11426Tom C
MemberTitanium won’t save you if you’re lazy with raw chicken.
15 de September de 2026 at 17:22 in reply to: Qinux BreezaMax: does the remote work through walls? #11282Tom C
MemberWalls will kill it, that’s just how these remotes are. Mine only works if I’m basically facing the fan with nothing in between. From another room it’s useless, so I stopped expecting anything there.
Tom C
MemberFair enough, sounds like it’s just the quiet room making it stand out. I’ll mess with the placement and see if that helps me sleep. Not gonna keep chasing it though, if it still bugs me I’ll just use it during the day only.
14 de September de 2026 at 08:19 in reply to: Does LumaGlasses need the app for translation or can it work without? #11067Tom C
MemberThat’s just how it works, the app has to be running in the background for translation. Bluetooth alone won’t do it. I stopped expecting it to be fully standalone after the first week.
Tom C
MemberI’d just message the seller first.
13 de September de 2026 at 12:09 in reply to: Does the Aptofit need a specific app or any fitness app works? #10943Tom C
MemberAny fitness app does not work. I tried pairing mine with the app I already had and it just sat there not connecting. You need whatever app the watch actually points you to, otherwise you get steps on the watch screen and nothing else.
13 de September de 2026 at 07:35 in reply to: Does Back Restore actually need 15 minutes or can I do less? #10914Tom C
MemberIf I skip the heat and just use the arch part, I can bail after 5 minutes and my back feels the same as a full session. The full 15 only matters when I want the heat to actually soak in. Otherwise it’s just lying on the floor being bored.
Tom C
MemberWell water usually means weak flow, so no.
Tom C
MemberA full staircase is pushing it. I did our steps once and it was fine for the first few, then the suction felt weak and I gave up. If you’re just doing spots, sure. Whole flight, no.
10 de September de 2026 at 06:26 in reply to: Is the Derila Ergo pillow meant to be used with a regular pillowcase? #10434Tom C
MemberJust use the cover it comes with. I messed around with a regular case for maybe three nights and it was more hassle than it was worth. The foam cover is already soft enough, and stuffing it in a case just made the whole thing feel bulkier than it needed to be. If you’re set on using a case, you can, but you’re basically covering up the part you paid for. I stopped bothering and it sleeps the same.
8 de September de 2026 at 10:22 in reply to: Do you use the Glokore Therapy Mask before or after skincare? #10137Tom C
MemberThe mask is designed to go on clean bare skin. I have no idea why you would want to put anything underneath it because that is just going to block the light. You are doing it right. Keep it simple and just do your serums after you are done with the session.
8 de September de 2026 at 01:38 in reply to: Does the CoolJet work okay if you don’t fill it all the way? #10071Tom C
MemberHalf filling it is fine as long as you know what you’re getting. These things don’t have a sensor that forces them to work harder when the water drops. The pad still gets wet, the fan still blows, you still get cool air. It just runs out sooner. That’s the whole trade-off.
The 8 hour figure is definitely based on a full tank. If you’re putting in whatever’s left in your bottle, you’re probably looking at 2 to 4 hours depending on how much is actually in there. Not a big deal if you’re just sitting at your desk and can top it off when you get up to stretch.
I think people overthink the water level thing. The only time it actually annoys me is when it runs dry and I can’t be bothered to get up. But that’s a me problem, not a CoolJet problem. You’re not damaging anything by running it half full.
6 de September de 2026 at 07:50 in reply to: CoolCove vs my old space heater, is the heat similar? #9806Tom C
MemberIt’s a different kind of heat, honestly. The radiator soaks the whole room slowly, while this thing just blasts warm air right at you. I found it fine for sitting at a desk, but the office itself wasn’t as evenly warm as with my old one. If you want your space heated, not just your chair, it might feel a bit weaker.
Tom C
MemberMine has spent a few months in the center console just because I forgot to bring it in. No issues so far, but honestly the heat concern seems like overthinking it. These things are just plastic with a plunger. If it gets warped or stuck, you’ll notice when you grab it, not before.
3 de September de 2026 at 16:47 in reply to: Black Falcon Drone setup time – is it really quick? #9408Tom C
MemberI’ll be honest with you, I timed mine once because I was curious about the same thing. From pulling it out of the bag to actually getting the props spinning, it was around three minutes. The phone connection is the slowest part, but only because you have to wait for the app to recognize the drone. The physical unfolding is nothing, it’s two arms and you’re done.
What I’d guess trips people up is the first time you do it. The controller pairing isn’t hard but the app menus aren’t obvious and you might sit there for a few minutes figuring out which button does what. After that, it’s routine.
I’ve had days where it took longer because the app decided to update or the phone refused to connect on the first try. That happened more than once. Not a dealbreaker, but don’t buy this expecting to be airborne in sixty seconds every single time. Five minutes is a safer estimate if you’re not rushing.
Tom C
MemberThe label says what it says, but labels also say a lot of things. I’d look at what NuraFix is actually doing before trusting it on a headlight. It’s basically a polish with some filler and a coating. A headlight that’s hazy from UV damage needs actual sanding to get the dead plastic off. Spraying a nano coating over that is just sealing the problem in.
I’ve seen people use paint products on lights and it looks okay for a week, then the coating starts peeling or streaking because the surface underneath wasn’t prepped right. If your headlights are just slightly dull, sure, try it. But if they have that yellow, crusty look, you’re wasting your time and probably making it worse. Proper headlight kits exist for a reason and they’re not that expensive. I’d save the NuraFix for the bumper where it belongs.
1 de September de 2026 at 14:02 in reply to: Does the Pro Capture come with a decent memory card or do I need to buy one separately? #9072Tom C
MemberDon’t count on one being in the box.
1 de September de 2026 at 02:59 in reply to: Does SavingStars compare to the old powder I used to buy? #8993Tom C
MemberThe foam is the whole point of this stuff, not a show. That reaction is what breaks up the gunk. If it only sat there like the old powder, it wouldn’t be doing much. You’re fine, just let it sit for the 20 minutes and flush it.
Tom C
MemberNot a dumb question. I’m a side sleeper and the thing stayed in my mouth all night, no issue there. The jaw pressure took a bit to get used to, but it wasn’t like it was forcing anything out of place.
29 de August de 2026 at 22:24 in reply to: Is it normal for the Ozoori to feel warm after Boost Mode? #8657Tom C
MemberMine gets warm too, but I noticed it more when the battery was getting low. Once I charged it back up, it ran cooler. Could be coincidence, but if yours is sitting near the back of the fridge where the compressor vents out, that probably doesn’t help either.
29 de August de 2026 at 13:59 in reply to: Does the DrFlexa get warm after wearing it all day? #8599Tom C
MemberIt’s just neoprene, so yeah, it traps heat. I wouldn’t expect it to feel like nothing after hours of wear. I only use mine when I’m actually moving around, so the warmth never really gets a chance to build up into something annoying.
Tom C
MemberNever noticed that with mine. Air feels dry enough to me.
28 de August de 2026 at 04:33 in reply to: Qinux BlackOptic without an SD card, can you still use it? #8377Tom C
MemberI’d still grab a card for it. Yeah, the viewing works without one, but you’re basically carrying around a $100+ gadget that can do nothing but show you a screen. That’s a waste if you ask me. Even a cheap card means you can actually use the thing for what it’s supposed to do. I wouldn’t run it without one.
27 de August de 2026 at 10:11 in reply to: CarbonOne Safe vs old detector: is the beep pattern different? #8261Tom C
MemberMine does the same thing. The short beeps are just the unit checking itself or whatever before it actually goes off. Took me a couple weeks to not jump every time it did that during a test. Sounds normal to me.
-
AuthorPosts
