Forum Replies Created
-
Posts
-
I’d pick one room and just go outlet by outlet for a few minutes. It’s kind of like checking which lights are left on before bed, except the “lights” are little boxes that never really turn off. That gives you a rough idea without dragging every plug into one big pile.
I ended up in a similar spot last year. Had a WaveMax running on the living room TV for a few months and it was pulling in everything I cared about, so I grabbed a second one for the spare room mostly so I could watch the morning news while getting ready. I set the new one up on a little shelf near the window, scanned channels like normal, and honestly both have just kept working. The living room one didn’t change at all from what I could tell. Same channels, same picture, no weird dropouts or anything.
What I noticed more than anything was that placement on the second one mattered a lot more than the fact that there were now two antennas in the house. My first try in the spare room was kind of tucked behind the TV and it was pretty lousy, so I moved it closer to the window and it cleaned right up. But it never affected the main TV at all during that whole process, even when I was messing with the second one.
So from my own experience it’s been a non issue. I’ve had both running at the same time plenty of evenings, one in each room, and they just do their thing separately. I think the only real variable is where you put the new one in the room.
The hole doesn’t get in the way at all for me. I’ve had mine for about eight months and chop onions, carrots, peppers constantly. It’s honestly a non issue once you’re actually using the knife.
Snug it down and then give it a little extra nudge. You don’t need to hang off the wrench or anything, but a loose head is way worse than a tight one. I’d check it after the first few minutes of running too, mine always seems to settle in a bit.
It’s worth a shot for the dullness but the rough texture might need a clay bar first, otherwise the cloth won’t do much. I tried mine on a similar surface and it helped the look a bit, but be ready to put in some elbow grease.
Mine lasted closer to two weeks in a smaller space, but the garage one faded faster. I just go by the smell, honestly. Once I can’t pick it up anymore, I swap it out.
I mostly cut vegetables too, and I used a cheap bamboo board for a couple years before switching. The thing that finally pushed me was the smell. I’d cut a bunch of scallions and garlic for a stir fry, wash the board, and the next morning it still smelled like a salad bar. I tried lemon and salt, vinegar, leaving it in the sun, all the usual stuff people suggest. It would fade for a day and then come back as soon as the board got wet again. That got old fast.
So I got a non-porous board, not this exact one but same general idea, and the smell thing basically stopped being part of my routine. Rinse it, wipe it, done. No oiling, no scrubbing, no waiting for it to dry out properly before I put it away. For veg only prep that’s honestly the main benefit for me. The antibacterial angle doesn’t really move me either since I’m not handling raw chicken on it.
One thing I’ll say though, if you’re doing a lot of fast chopping with a thin knife, the feel is different. Wood gives a little, this doesn’t. It took me a week or two to stop noticing. Not a dealbreaker, just different. My wife still reaches for the old wood board when she’s doing something quick, so it hasn’t fully replaced it in our kitchen.
I think the “boost pressure without electricity” thing is just how any narrow nozzle works. You’re forcing the same water through a smaller opening, so it feels stronger at the tip. That’s not some special tech, it’s basic hose physics. I had a neighbor who swore his fancy nozzle was way better than mine, so we swapped for an afternoon while doing our driveways. Same hose, same spigot. Mine was a cheap adjustable one from the hardware store. His was one of those twist style ones. We both just stood there spraying and honestly the water hit about the same. His felt a little more concentrated if you twisted it down, but that’s it. He wasn’t thrilled when I pointed that out. So yeah, if your current nozzle works and you’re happy with it, I doubt you’d notice much of a jump. If it’s leaking or cracked, then sure, replace it with whatever.
I used a 32GB in mine for parking mode and it usually rolled over every couple days, so it depends how often stuff triggers. If you park somewhere busy it fills faster than you’d expect. Nothing wrong with it, just means older clips disappear sooner.
I’d just get one and see how it goes in the main room. If you’re expecting it to handle every room from one outlet, that seems like a stretch. I’d rather start small than buy a bunch right away.
I just skipped the whole thing and use my phone’s hotspot honestly. The Ryoko seems fine but it’s another gadget to charge and keep track of, and I don’t travel enough to justify it.
I don’t run mine while it’s plugged in anymore. The light dimmed down a bit whenever I had it charging and on at the same time, so now I just charge it first and use it after.
I got mine mainly for a small office and the heat side has been fine for that. It’s not going to warm up a whole open apartment, but it keeps a closed room comfortable without me dragging out a space heater. The remote is handy too since I can just leave it on the wall.
I ended up using mine mostly for washing off the deck and some lawn chairs, and the dial does change the feel of the spray, but I’d describe it more as going from a soft shower to a firm rinse. It’s not this huge jump from mist to a fire hose or anything. For patio dirt that’s already loose, it’s fine. For anything caked on, I still end up grabbing a brush first and then rinsing. So if you’re picturing one twist turning it into a pressure washer, that’s not really what happens. The adjustment is real, just narrower than the name makes it sound. I still use mine fairly often because it’s easy to grab and doesn’t need any setup, but I wouldn’t buy it mainly for the 360 thing.
I usually just leave the app open in the background and it picks up fine when I talk. If I swipe it away, translation stops working until I open it again, so that’s been my routine. Not sure if there’s a setting I’m missing either.
Adding games isn’t hard, but it’s also not something you just click once and forget. I tried it on mine and got a few of my old favorites running after moving files onto a USB stick. It took me a bit to figure out where they needed to go, but I didn’t break anything. If you can handle basic copy and paste, you’ll be fine.
I’d rather keep the antenna in the room where I actually watch TV than stick it in the kitchen just because that’s where the window is. Mine lives on a dresser and it’s fine for the handful of channels I care about.
I tried one on mine mostly because I had a spare, and it stuck fine but my case has a rubbery shell over it. The sticker actually grabs better on that than the bare plastic did. Whether it does anything, no clue, but it hasn’t fallen off in like three weeks.
I’ll be the first to admit I’m not the sharpest tool in the shed when it comes to gear comparisons. I ran a regular metal blade for a long time because that’s just what came with the trimmer and I never thought twice about it. Eventually I picked up a VultrioX on a whim after I snapped a bolt on the old blade mount and figured it was a sign to try something different.
For me the biggest difference wasn’t raw cutting power, it was more about how it handled the stuff right against fences and rocks. With the blade I was always paranoid about flinging a chunk of something into a window or chipping the blade on a hidden stone. The wire head seems to bounce off stuff a bit easier and I didn’t have to baby it as much around the edges of the driveway.
That said, I did notice it chews through battery faster if you’re on a cordless machine. I’m running a 40V unit and I can get through the whole yard, but there’s less margin for error. Thick weeds and overgrown grass it does fine, nothing magical but it gets the job done without stalling like the blade sometimes did when I hit a thick clump at the wrong angle.
I haven’t gone back to the blade since, but I also wouldn’t say I’m blown away. It’s just different. If your current setup is giving you headaches with line breaking or you’re tired of sharpening, it’s worth a shot. If the blade’s been fine for years, I wouldn’t go out of my way to replace it.
Higher up probably gives it a cleaner shot across the room, but I wouldn’t overthink it. Basements usually have low ceilings anyway, so the difference between a floor outlet and one higher up is pretty small. I’d just make sure it’s not sitting directly behind a couch or a stack of boxes.
Different devices measure at totally different times and under different conditions, so I would expect some variation. Your watch is basically taking continuous readings throughout the day, while the scale only catches a brief moment when you step on it. If you just walked around, ate, or even sat down differently before weighing in, that can shift things.
I think the bigger thing is to watch the trend on each device separately rather than trying to line them up side by side. As long as your scale readings are fairly consistent from day to day, it’s probably working as intended for what it is. The heart rate feature on a scale is more of a bonus than a core function, in my opinion.
I wouldn’t compare them too closely though. Mine has shown a slightly higher number than my watch on some days and lower on others, so it kind of averages out over time. Seems normal enough for a consumer device.
Mine’s been plugged in for about three months now and honestly I just wedge it in wherever the port is and forget about it. My OBD port is under the dash on the driver side, kind of facing down, so the device hangs at an angle. I didn’t bother trying to reposition it or secure it with anything. It’s still there, it’s still working, and the car runs the same as it did on day one.
I did worry at first that it might block something or get knocked loose when I get in and out, but it’s small enough that it doesn’t get in the way. I think people overthink the placement thing. It’s not like it has a sensor that needs to face a certain direction or anything. It just reads what the car is doing through the port, so as long as it’s connected it should be fine.
The only thing I’d say is if your port is in a spot where the device sticks out far and you’re worried about bumping it with your knee, maybe just tuck the cable or rotate it slightly if the port allows. But if you’re asking whether it needs some special angle to learn your driving, I really don’t think that matters. Mine’s been in an awkward spot the whole time and it learned fine after a couple weeks of commuting. I’d just plug it in and not stress about where it’s pointing.
The manual probably says wall outlet only, but I think most people end up using a strip or cord anyway. Mine is on an extension cord right now because my setup is weird too and it’s been fine for a while. I’d just make sure whatever you plug it into feels sturdy and isn’t some super thin old cord.
That beeping is just the cycle finishing, mine does the same thing every time. I actually like it because I can hear it from the other room and know when to go grab my clothes. Would be more annoying if it kept going, but it stops after a few beeps for me.
I had mine on a pretty small shelf for a while and it was fine. The base is wider than you’d think from the pictures, so it didn’t feel like it was going anywhere unless I really knocked into it. My cat has bumped it a few times and it stayed put.
It is pretty normal to notice the firmness at first. I think some people are more sensitive to that feeling than others, so it is not just in your head. I would not make the final call on the first night, but you will know within a week or two if it is going to work for you.
I think it really comes down to how your mouth is shaped honestly. I got one a few weeks back and I was worried about the same thing since I’ve never been able to wear those big night guards comfortably. The Nunawave is not as slim as a retainer but it’s not like you’re shoving a brick in there either. The edges are soft enough that it didn’t dig into my cheeks or anything, which was my main fear.
For me it feels noticeable but not overpowering. I can still talk a little bit with it in, which says a lot. I don’t know how it would be for someone with a really tiny mouth though. I think if you can handle wearing a mouthguard for sports or those teeth whitening trays, you’ll probably be okay with this one.
