Forum Replies Created
-
Posts
-
Shelf above the bed is fine as long as it’s actually aimed toward where you sleep, not straight out into the room. Mine sits higher than I expected and I still feel it on low, though the higher speeds are what really carry. Just check it’s not so close to the edge that you bump it at night.
Mine only gets touched when something actually feels off, like slow speeds or a weird login page. If it’s working fine I leave it alone for months at a time. Firmware updates aren’t a routine for me, they’re a reaction.
I’d just use it on low and get on with your evening. Clicking it on and off with the remote only works if you actually remember to do it, and half the time you won’t.
My gauge stays pretty steady for the first few minutes then drops fast near the end, so it’s kind of the opposite of yours. If the blower still has the power you need, the light is probably just a rough guide rather than anything exact.
I mostly use the offline bit for the language I actually need on a trip and leave the rest online. It’s not something I expect to fully replace a connection, so the vague wording doesn’t really bother me. What I’d want to know is whether the offline languages are listed somewhere in the app before you buy.
I picked up a pair before a trip last spring and the difference for face to face stuff is bigger than I expected. With my old handheld thing it always felt like a transaction, you type or talk, hand it over, wait, hand it back, and the whole rhythm of the conversation dies. With the earbuds you just keep talking and it comes through in your ear a second later. I used it for asking directions and ordering at a couple of places and nobody had to grab my phone or pass anything around, which was the part I hated most before.
The lag is there but it’s short enough that it doesn’t really break things up. For basic travel stuff like that it’s been fine for me.
I just rotate the treats themselves, not the toys. My cat is way more interested when I switch from her usual kibble to a little bit of tuna water dabbed around, and honestly the smell seems to do more than the location. She still checks her old spots first though, so it’s not like it fixes everything.
Frying your phone is actually the part I’d be least worried about. The real question is whether the pack itself is worth the hassle, since old drill batteries are usually half dead anyway. I tried one for a camping fan and it barely lasted an evening.
Mine definitely does not shut off every time it tips. I’ve found it upright still running after catching the cord, so I don’t really buy that it’s a guaranteed thing. The kill switch is more about the base losing contact than the heater actually falling over.
Mine sits about two feet from my head on the nightstand and I still sleep fine with it on low, so I don’t think the noise is the real problem. The thing that got me was the little click every time the compressor kicks on or off. That’s what woke me up the first few nights, not any hum.
Soft definitely took some getting used to for me. I don’t think soft means a worse seal though, if anything the hard red one felt like it was sliding around more on me. I’ve only used mine a handful of times for practice, so that’s about all I’ve got.
I actually use mine in the bathroom, but not the way most people here are describing. I don’t leave it plugged in there or run it right before a shower. I plug it in, let the room warm up while I’m getting my towel and pajamas ready, then unplug it before I even turn the water on. Takes maybe five minutes and the mirror doesn’t even fog up as much.
The reason I do it that way is because the outlet in my bathroom is right next to the sink, and I just don’t love the idea of it sitting there plugged in while the room turns into a steam box. So for me it’s less about whether the heater itself can handle it and more about me not wanting to find out the hard way. Ten minutes is probably fine, but I’d still unplug it when you’re done. That’s just what I do though.
If it were me, I’d get the Coolzy but treat it as a spot heater rather than something that’ll fix the whole living room. I used one in my last apartment, which had a giant single-pane window in the front room, and the heat mode did fine if I was sitting within maybe six or eight feet of it. Walk to the other side of the room and you notice the difference fast. It kept my little couch area comfortable while I watched TV, but the rest of the room stayed cool.
What I’d actually do is set it up near where you sit most, close the doors to the rest of the house, and run it on a lower setting instead of blasting it. That way it cycles less and you’re not watching the meter spin. For one room that loses heat, I think it’s worth trying if you mainly want to be warm in one spot. If you want the whole living room to feel toasty from corner to corner, that’s probably asking too much.
For me the dealbreaker would be if it only works while plugged in, and it doesn’t, so I’m fine with it. I actually prefer keeping mine on the charger stand between uses rather than trying to stretch a charge across multiple days. That habit alone means I’ve never once run out mid-session, even on days where I use it more than usual. I know some people want to take it traveling and not deal with a charger, and that’s a different situation. My routine is pretty much home only, so it just goes back on the stand when I’m done and it’s ready whenever I grab it. I’d rather do that than babysit the battery percentage. So the battery life question kind of stops mattering for me personally. If you’re the type who leaves things unplugged for a week, that’s where it might get annoying.
I’ve only used mine on a chain that was still cutting okay, so I can’t say how it handles one that’s properly dull. But the difference on mine felt pretty minor, more like a quick tune up than a real rescue.
Mine has a little wiggle to it right out of the box and I’ve just left it in one spot since. Been a few weeks and it hasn’t worked its way out of the outlet yet, so the looseness seems more about the swivel part than the actual prongs.
I never really expected it to hit 1.5 seconds anyway, that number just seems like a best case thing. For me the bigger thing is that I don’t mind a short pause as long as the translation comes out right. I’d rather wait an extra second than get a fast but wrong sentence back. That’s just my preference though.
I don’t think heat is really the thing to watch with these. Mine got left out plenty last summer and the body was fine, it was the little rubber washer inside that dried out and started dripping at the connection.
The number on the box is always the best case scenario, I just assume I’ll get less and go from there. Mine have been fine for a day of on and off use, nothing crazy.
Remote range on these little fans is just kind of random in my experience. Not this exact one, but I’ve had a couple similar portable fans where the remote was basically line of sight only, and I just got used to aiming it. What helped me was figuring out where the sensor actually sits on the unit, because on mine it was tucked off to one side and I was pointing at the wrong spot half the time. Once I started aiming there it got a lot more forgiving, though still nothing through a wall. So your hallway test probably isn’t going to work no matter what. If it bugs you, you could try swapping the battery in the remote just to rule that out, but honestly a lot of these cheap remotes are just like that. Mine lives on the nightstand next to the fan so I barely notice it now.
I tried a DappSmile after using a plain metal pick for years, and for me the ultrasonic tip didn’t magically scrape off the hard stuff better. What it did do was make the whole thing less of a battle. The vibration kind of loosens things so I’m not digging at my teeth with the same force, and I noticed way less gum soreness after. My old pick got the job done but I always felt like I was chiseling away. The DappSmile feels more like it’s nudging stuff loose. That said, it’s not like it found tartar my pick somehow missed. If you already have a technique that works and you’re not bothered by the pressure, I don’t think it’s some huge upgrade in cleaning power. It’s more about the experience being gentler and easier to control. Worth switching? Only if the scraping part is what annoys you.
I’d skip it for a checked bag and use it for my carry-on instead. That’s just me though. I’ve had one in a backpack and it was handy when the bag was nearby, but relying on it while the bag is in the cargo hold would bug me.
Mine stays in my back pocket with my wallet and honestly the only thing I notice is it gets a little curved from sitting. Still blocks fine though, I tested it once by trying to tap my card through the wallet and nothing happened. So pressure doesn’t seem to kill it.
I’ve never really paid much attention to the surface, honestly. Mine sits on linoleum and I just step on and off without thinking about it. The numbers do change day to day but I always figured that was just water weight or whatever.
Good to know, thanks for the input everyone. Sounds like I just need to check my chain’s numbers first.
I think the vibration mode is pretty different from a TENS unit, at least from the one I tried years ago. The TENS I used felt like little electric pricks on my skin, almost like a buzzing pins and needles thing. The Back Restore vibration is much deeper and slower, more like a strong massage gun but pressed against your back while you’re lying on it. It doesn’t have that sharp, zappy feeling at all. I can see why people compare them since they’re both electronic and for pain, but the experience is honestly nothing alike. The Back Restore feels more like a physical pressure thing rather than an electrical thing. If the TENS felt weird to you, I wouldn’t expect the same weirdness here. It’s a totally different sensation, more like a heavy kneading feeling than anything electric.
The adhesive should be fine honestly, TVs don’t get that hot on the back panel where you’d stick it. The one thing I’d say is just make sure you put it somewhere you won’t accidentally touch it when you’re plugging in cables or dusting behind the TV, because once it’s on there it’s not coming off without leaving residue.
