Forum Replies Created
-
Posts
-
Mine reaches from my bedroom to the hallway fine but I don’t usually bother going further than that. I’ve never really needed to adjust it from the living room so I can’t say for sure. It’s just a remote though so I doubt it’s meant for long range.
I’ve got one and I kind of disagree with the whole “it just pulls straight from a bucket” thing. Mine does draw water but only if the hose is short and the bucket sits above the unit. I first tried it with a tall bucket on the ground and it just whined and barely moved anything. Once I set the bucket on a chair it worked fine. So it does self suction, but it’s way pickier about the setup than people make it sound. If you’re planning to use it that way every time I’d just test it before you rely on it.
If you’re doing light dust in a garage, this thing will definitely move it, but a good chunk of it will just end up floating around until it settles back down somewhere else. I’ve had better luck using mine on stuff that’s already loose and chunky rather than fine dust. For shelves, a brush plus a shop vac gets me further.
Mine came with the tips already on it, so no assembly needed. I did have to charge it first though, and it took a bit to get a feel for the pressure. My first line on a scrap piece of pine was pretty wobbly, but the next few were fine.
I’d skip it if your wallet is already tight. The card itself is slim, but you’ve still got to leave a little room for the speaker to actually be audible, and in a jammed wallet that gets muffled fast.
I actually called the company before using it since we’re on septic too, and they said the powder breaks down into stuff that won’t kill the tank bacteria. Been using it here and there for a few months now, no weird smells or issues.
I’ve had mine sitting on a low-pile carpet in my office for a while now and never noticed any difference in how it cools or heats. I just make sure it’s not jammed right up against anything and it does its thing. I wouldn’t stress over the carpet unless it’s super thick and fluffy, but even then I doubt it would cause a real problem.
That would kind of annoy me too if I was in a hurry. I usually just leave mine out on the drying rack after rinsing and by the time I get back to it, it feels totally normal. If I need it right away, I just pat it dry and deal with it for a few seconds, it doesn’t really affect anything while I’m using it.
I’d say it depends more on what shape the chain is in than whether it’s old or new. I’ve got a couple chains that have been through a lot and they still take a decent edge with the Klampero. The thing is, if a chain has damaged cutters or is really uneven, no hand tool is going to fix that properly. You’d need to replace it anyway.
What I noticed is that older chains just need a bit more patience and a few extra passes. The tool keeps the angle steady, which helps a lot compared to freehand filing when the teeth are already inconsistent. It won’t make a worn chain cut like it did on day one, but it will get it back to workable condition if there’s still enough material left on the teeth.
I’d say try it on your worst chain first and see what happens. If it’s still too far gone, that chain was probably on its way out regardless.
Steam on glass sounds like it would be a mess, but it actually isn’t as bad as you’d think. I borrowed one from a friend to test on our shower door and the big mirror above the sink, mainly because I was curious about the same thing. The fog does happen for a second, but it clears fast once you wipe it with a microfiber cloth. I didn’t get streaks, but I also didn’t let the steam sit there and condense. I kept the nozzle moving and wiped as I went, kind of like I was chasing the steam. The bathroom mirror came out pretty clear, I’ll admit. I was expecting to have to re-clean it with glass spray afterward, but I didn’t need to. It’s not magic, but for a quick refresh it does the job. I’d say the main thing is just not to overthink the steam part.
I had the same thing happen, but mine hit a point around a month in where it just stopped changing. It’s not as aggressive as day one, but it still does the job, just slower. I think that initial sharpness is kind of a break-in thing, not something that’s going to keep fading until it’s useless.
I think people expect too much if they want it to magically erase limescale everywhere. In my case the water definitely feels less harsh on my skin, which is the main reason I kept using it. The limescale on the glass door still shows up, but it does seem to take longer to build up than before. I would not buy it just for that one thing though.
I’d plan on buying spares either way, since the included ones never seem to match what you actually need.
It’s not just you. I’ve noticed the same thing when I’ve used mine on a soft surface. The numbers bounce around way more than they do on a solid floor, so I just stick to the tile now unless I really have to.
I’d actually push back on that a little. I ran mine during a pretty gross humid stretch and it still felt noticeably cooler than just the ceiling fan, especially if I sat close to it. Not a huge difference, but enough that I didn’t feel like I wasted my time filling it.
I mean, for a 6-year-old it’s probably fine. The guard does its thing and it’s not like you’re gonna slice them open or anything. I’d say the bigger issue is that they might get bored sitting still for it, but that’s true with any nail trimming. The little nail bits getting caught inside is a nice bonus, honestly.
I think the dryness is just part of having any heater running for a while. I’ve had mine on in the evenings and my skin feels a bit tight, but nothing worse than what I’d expect. Probably just one of those things you deal with in winter.
I think the strap concern gets blown out of proportion. I wore mine while doing some light tidying up around the house and it didn’t budge. For desk use I honestly can’t see it being an issue at all.
I think it really depends what you call low pressure. My hose is nothing special and it works fine for stuff like the car and patio furniture. Not gonna blast off caked on mud or anything but it does the job.
I think the UV thing is probably more of a nice bonus than a main feature, but if it helps with musty smells a bit, that’s not bad.
I picked one up last week and honestly, it’s fine for a desk. You plug it in and feel warmth coming pretty quick without waiting long. Not sure why people get hung up on exact seconds, it just works.
Honestly I’d just get it and see how it feels. If your water pressure is decent it’ll probably do the job for regular dirt. I use mine for the driveway and it’s fine as long as I’m not trying to remove years of buildup.
