Forum Replies Created
-
Posts
-
Mine sits over a hoodie most of the time and I still feel the heat fine, so I don’t think you’re missing much. The one thing I noticed on bare skin is the pulse gets a bit sharp at higher settings, mostly on the bony part of my neck. Shirt softens that a little for me.
Mine went straight onto my outdoor tap with no adapter, though I did have to swap the little connector ring that came in the box first. I’m not big on fiddling with fittings, so that was a pleasant surprise. Still, I’d bring the tap end along if you’re buying in person, saves a return trip.
Mine’s just in my right ear and I’ve had no issues with the modes, they still switch and sound different to me. Only thing I’d say is I got my ear tip size wrong at first and it whistled like mad, sorted once I swapped it. So one works fine in my book, just get the fit right.
I went in expecting to be underwhelmed, mostly because anything with “Pro” in the name usually makes me roll my eyes. But after a few months of regular use it’s just become the thing I grab without thinking about it. The part that won me over was the foil cutter tucked into the base. I used to fumble around with a little knife and nick my thumb, and now it’s one motion and done. Small thing, but it’s the bit I notice every single time.
On the older bottle front, I’ve had a couple where the cork was pretty chewed up from a previous manual attempt and it still came out in one go. Not saying it’s bulletproof, since a cork that’s already falling apart is going to do what it wants. But the smooth pull is what makes it feel less like a gadget and more like something I’ll keep on the counter.
My wife was the bigger skeptic and now she uses it more than I do, mostly because she doesn’t have to wrestle with the twist. So the upgrade felt worth it even though I wasn’t looking for one either.
I’ve done it with a can of tomato soup a few times and it actually handled it fine, no drama. The key for me was warming the soup in a pot first and pouring it in, since the mug doesn’t heat anything itself. It kept it warm while I ate lunch over maybe half an hour, which is more than I expected. Not a blender by any means, but for a smooth soup it did the job.
The app dependency is the bit that puts me off too. I had a smart plug setup for a lamp that got dropped by the maker and it was useless after that. For a feeder I’d rather have something that just runs its own schedule.
I’ve had mine a few months and use it for work chats with a couple of guys who don’t speak much English. Passing a phone back and forth always felt awkward, so the earbuds do make it feel more like an actual conversation. It’s not instant, there’s a small lag, but for short back and forths it’s been fine. I wouldn’t call it magic though.
I mostly keep mine at home too and it’s been fine for that. The roaming stuff just sits there unused, sure, but I’m not paying a premium for it so who cares. It’s a solid backup when the main line drops, and I use it for the odd day out as well.
I’ve had the same tank of gas sit in my shed mower since last October and it fired right up in April, so I’m not convinced it’s the big deal people make it out to be. The one thing I do bother with is emptying the little primer bulb line if it’s gonna sit, since that’s where mine gummed up once. Beyond that I just park it and go.
Mine only gets plugged in when I’m actually sitting on it, mostly out of habit more than anything. If the outlet isn’t actually grounded though, the mat itself won’t do much, that part isn’t just marketing. Worth checking that before you buy one.
Depends what you’re filming. For quick clips where you just point and go, I rarely touch the screen. But the moment I need to line up a shot without guessing, it earns its keep.
If I were you I’d figure out what your actual shoulder height is when you’re lying down before buying anything. I’ve got broad shoulders too and spent way too long assuming the cutout thing was the answer. Turns out my problem was the pillow being too flat, so my shoulder kept rolling forward and dragging my neck with it. The shape of the pillow barely mattered once I got something taller.
The Melara Air might work, but I’d be careful treating those cutouts like a magic fix. They’re more of a small comfort thing than something that changes how your shoulder sits. If your neck is already sore every morning, a pillow swap alone probably isn’t going to sort it. I’d try folding a towel under your current pillow first just to test if extra height helps. If it does, then you know what you’re actually shopping for.
Mine lasted almost two years before I finally swapped it out, and even then it was more about the thing getting grimy than actually failing. The “long-lasting” claim is vague because it really depends on how you clean it and how hard you clench. Two months in you’ve got plenty of life left.
I mostly use mine for podcasts and music, so I hadn’t even opened the app for the first week or two. The buds paired fine over Bluetooth and did the normal earbud stuff no problem. It’s only when I finally poked around the app that I saw the translation side sitting in there, with the language picks and the conversation setup. So for plain listening you can skip it, but the moment you actually want it translating, that’s where it lives. Nothing about it was hard once I sat down with it for ten minutes, the manual just buries the simple stuff under a wall of text. If you’re only after the translation part, install the app first and save yourself the confusion later.
Never had an issue using mine left-handed. The shape cuts straight for me and the hole actually sits under my index finger fine, so I don’t get the whole designed-for-righties thing. If anything I grip it a bit further back than most people seem to.
Pointed one on front teeth is asking for trouble, I only use that for the back ones where I can actually see what I’m doing. Flat tip on the front, light pressure, and it does fine. Switch tips depending on the tooth, not one for everything.
Mine does the same when the tank’s got water sitting in it. I figure it’s just sloshing around in there since it’s not a sealed tank. Two months in and it hasn’t caused any issues.
I’ve taken mine to a few countries nobody talks about on here and it sorted itself out every time. No menus, no fiddling, just turned it on and it grabbed whatever was local. The 176 thing gets picked apart a lot but I’ve not hit a dead spot yet personally.
Mine actually did help with the brushing sensitivity, but not overnight. Took a few weeks of using it most nights before I noticed I wasn’t bracing myself at the sink anymore. The marketing is a bit much, but it’s not pure nonsense either.
Mine actually stays put on my 13 lb mutt once I got the strap snug, no constant sliding. The chunky look in photos is mostly the tracker, the strap itself is fine.
I’m left handed too and the trick for me wasn’t the tool at all, it was where I stood. I kept trying to work from the same side my right handed mate does and it always felt like my wrist was fighting the angle. Once I started standing more over the bar instead of beside it, the whole thing settled down and I could hold it steady without thinking about it.
I do think the grip suits right handers a bit better out of the box, but not enough that I’d bother swapping tools over it. I’ve done maybe a dozen sharpenings on my saw now and the results are the same as when my neighbour does his. So it’s mostly just getting used to your own stance I reckon. Bit like anything else, the first few goes feel odd and then it just clicks.
