Tagged: Flixy
- This topic has 17 replies, 17 voices, and was last updated 1 week, 1 day ago by
Riley1.
For Flixy details and availability, you can visit the official website ↗
-
AuthorPosts
-
11 de September de 2026 at 21:11 #10699
Riley1
MemberI have my Flixy plugged into a TV in the guest room and it’s been mostly fine. But sometimes the stream drops for a second or two. My router is dual band and I’m not sure if the stick is even connecting to the 5GHz band. Does it make a difference for this thing? Not trying to overthink it, just wondering if I should bother messing with router settings.
11 de September de 2026 at 21:36 #10702Sophie Nguyen
Member5GHz made a pretty obvious difference for me. I had mine on the 2.4 band for a while and got those little hiccups, switched it over and they basically stopped. Not saying it fixes everything but it’s worth a quick look at your router settings.
11 de September de 2026 at 22:07 #10706Alex_28
MemberIf you’re getting drops then yeah it makes a difference. Mine was on 2.4 for months and had the same random stalls, moved it to the other band and it’s been solid since. Worth a quick look at the router settings if you know the login.
11 de September de 2026 at 22:32 #10709Leo Grey
MemberI wouldn’t touch the router settings for this. I’ve got a similar stick setup in my basement and just left it on whatever band it grabbed. The drops I get are usually when someone else is hammering the network, not from the band itself. If yours is anything like mine, the stick probably doesn’t even pick the better band on its own. So you could go in and split the bands and force it, but then you’re messing with every other device too. I did that once for a different reason and spent an hour getting my printer back online. Not worth it for a couple seconds of buffering. If it’s genuinely annoying you, maybe try it, but I’d leave it alone unless it gets worse.
11 de September de 2026 at 22:58 #10712
HanSoloParticipant5GHz is the one that actually fixed my buffering, so yeah it matters. If the router is putting it on 2.4 by default, that alone explains the drops. Worth a quick check.
12 de September de 2026 at 01:20 #10715Maya Chen
Member2.4 was fine for mine, never noticed a difference.
12 de September de 2026 at 01:49 #10718Jenny Mel
MemberI’ve got a Flixy on the bedroom TV and it does grab the 5GHz band on its own, but only when I’m in the same room as the router basically. Once I moved it to the back bedroom it kept flipping over to 2.4 and that’s when I started noticing the little pauses during shows. Not huge, just a blip here and there. What surprised me was that it wasn’t really about speed, more that the 2.4 signal in my house gets crowded with everything else, doorbell, baby monitor, all that stuff. So even though the stick showed a decent connection it would still stutter now and then. I ended up just leaving it and living with the occasional hiccup since it’s only the spare room. If yours is doing the same thing I’d at least peek at which band it’s actually on before changing anything else.
12 de September de 2026 at 02:21 #10722HarperL
MemberMy guest room setup actually did better on 2.4 because the 5GHz signal barely reaches down the hall. So switching bands isn’t automatically an upgrade, it depends where the router sits.
12 de September de 2026 at 02:51 #10726
no_sleepParticipantEveryone keeps saying 5GHz is the fix but that’s not always true. Mine sat on 5GHz for a while and honestly the drops were worse because the signal had to go through two walls to get to the TV. The 2.4 band is slower on paper but it actually holds a stable connection better at range. I switched mine back to 2.4 and the random stalls mostly stopped. So before you go digging through router settings, think about where the router actually sits compared to that guest room. If there’s a decent distance or a wall or two in between, forcing it onto 5GHz could just make things worse. The stick doesn’t need crazy speed for streaming anyway.
12 de September de 2026 at 03:22 #10729
Dani MoonMemberIt makes a difference but not the one people keep pushing. Mine ended up on the 2.4 side and the picture is smoother there than when I forced it over to 5. It’s probably just distance and walls doing their thing, so poking around in router settings is a coin flip at best.
12 de September de 2026 at 03:43 #10732Susan Keller
MemberMine streams fine and I never touched the router bands.
12 de September de 2026 at 04:10 #10735Devvit
Member5GHz helped mine when the router was close but the stick was in another room so it kept dropping anyway. I just left it on auto and it picked whatever worked. Sound like yours is fine most of the time so I wouldn’t mess with settings unless it gets worse.
12 de September de 2026 at 04:38 #10738
Nina_gadgetMember5GHz made a real difference for mine. The Flixy was fine on the old band, then I moved it over and the little stutters basically stopped. I’d say it’s worth poking around your router if the stick is sitting close enough to get a decent signal.
12 de September de 2026 at 05:04 #10741
Tom BriggsMemberI usually leave mine on auto and let it sort itself out. But I did check once out of curiosity and it was parked on the 2.4 side the whole time, even with the router in the next room. Streams were fine most nights. The drop here and there was more about the internet acting up than the band, at least for me. I do prefer keeping the stick on 2.4 anyway since it reaches better through walls. 5GHz is faster on paper but it falls off quick once you put a door or two in the way. So yeah, it can make a difference, just not always the one you expect. If the drops are only a second or two, I’d leave the settings alone and see if it settles.
12 de September de 2026 at 05:29 #10745Tom Brown
MemberIf you’re getting drops on a stick that’s probably parked on 2.4, moving it to 5GHz is worth a shot. Mine stopped hiccuping once I split the bands, though you lose a bit of range. Just check the router page and see where it’s actually sitting.
12 de September de 2026 at 06:00 #10748
Tom CallMemberDidn’t notice any change when I switched mine.
12 de September de 2026 at 06:20 #10751Chris Patrick
MemberJust check if it’s on 2.4 in the settings.
12 de September de 2026 at 06:47 #10754Riley1
MemberMine never switched bands and still streams fine.
-
AuthorPosts
- You must be logged in to reply to this topic.
For Flixy details and availability, you can visit the official website ↗
Flixy Reviews & Discussions
-
- Topic
- Voices
- Posts
- Last Post
-
-
Does Flixy stay cool when left plugged in all the time?
Started by:
Tom Call
in: Home & Living
- 13
- 14
- 2 weeks, 5 days ago
-
Does Flixy work okay if I mostly use it for screen mirroring?
Started by:
Sophi86 in: Home & Living
- 12
- 13
- 1 month ago
-
Does Flixy work with a really old HDMI port?
Started by:
Emma Reads
in: Home & Living
- 21
- 21
- 1 month, 1 week ago
-
Flixy setup question – can I keep it plugged in all the time?
Started by:
Liam Cross in: Home & Living
- 20
- 20
- 2 months, 1 week ago
-
Anyone using the Flixy stick on older TVs?
Started by:
LiamW
in: Home & Living
- 14
- 15
- 2 months, 2 weeks ago
-
Flixy for casual gaming – any good?
Started by:
Tom in NYC
in: Home & Living
- 19
- 19
- 3 months, 2 weeks ago
-
Does Flixy stay cool when left plugged in all the time?
-
